Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
-
TeckNeon
- 2GN Member
- Posts: 948
- Joined: Tue Jul 27, 2004 4:06 pm
- Location: Youngstown, PA
-
Contact:
Post
by TeckNeon » Wed Aug 18, 2004 5:20 pm
...and non-SRT-4 car? Is it a hood clearance issue? So, I would need to get a SRT-4 CF hood or similar to make it work? Can anyone clear this up for me?
"I can't believe I ate the whole thing." - H. Simpson
-
Stonebender
- 2GN Member
- Posts: 793
- Joined: Wed May 12, 2004 8:38 pm
- Location: Scumburg
-
Contact:
Post
by Stonebender » Wed Aug 18, 2004 8:17 pm
It's a hood clearance issue. An SRT-4 hood will fit on a non-SRT-4, but there will be some ugly gappage at the nose of the hood, because the SRT-4 hood is almost an inch shorter.
-
Diablo0
- 2GN.org Owner/Admin
- Posts: 12576
- Joined: Thu Apr 15, 2004 11:20 pm
- Location: Greenville, SC
-
Contact:
Post
by Diablo0 » Wed Aug 18, 2004 8:20 pm
Yes it's a hood clearance issue since in the SRT-4 there is a channel that it fits into. Getting an SRT hood would fix the problem but like Stonebender said there will be a gap.
-Jason
Black '02 Neon R/T |
White '02 Neon R/T -
SRT-4 Engine Swap
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein
-
Nightspy
- 2GN Member
- Posts: 429
- Joined: Wed Jun 23, 2004 1:30 pm
Post
by Nightspy » Thu Aug 19, 2004 8:49 am
there would be a gap. the SRT hood is a different length than the regular hood (saw it in person). but i wonder if that IP2 carbon fiber SRT-4 look alike hood has the right channels. hmm. and that hood is meant for a regular neon.
-
TeckNeon
- 2GN Member
- Posts: 948
- Joined: Tue Jul 27, 2004 4:06 pm
- Location: Youngstown, PA
-
Contact:
Post
by TeckNeon » Thu Aug 19, 2004 1:29 pm
I wonder if Modern Performance would know. They sell both...but I am not sure if anyone there has a regular Neon. They have like 3 SRT-4s at least they do "testing" on but regular Neons...
"I can't believe I ate the whole thing." - H. Simpson
-
Louie
- Former Jr. Admin
- Posts: 1177
- Joined: Wed May 12, 2004 12:29 am
- Location: Miami, FL
-
Contact:
Post
by Louie » Thu Aug 19, 2004 1:47 pm
the ip2 hood will fit ur car perfectly, and it will have clearance for the dc strut bar
-
Nightspy
- 2GN Member
- Posts: 429
- Joined: Wed Jun 23, 2004 1:30 pm
Post
by Nightspy » Thu Aug 19, 2004 2:09 pm
Louie wrote:the ip2 hood will fit ur car perfectly, and it will have clearance for the dc strut bar
Now THAT is what we were looking for. now you just have to ask yourslef if you trust Louie!
I do.
-
Stonebender
- 2GN Member
- Posts: 793
- Joined: Wed May 12, 2004 8:38 pm
- Location: Scumburg
-
Contact:
Post
by Stonebender » Thu Aug 19, 2004 6:59 pm
Louie wrote:the ip2 hood will fit ur car perfectly, and it will have clearance for the dc strut bar
I suspected it would. Hell, someone needs to try it. I'm bet Modern Performance has tried it, so you should just ask them.
-
Louie
- Former Jr. Admin
- Posts: 1177
- Joined: Wed May 12, 2004 12:29 am
- Location: Miami, FL
-
Contact:
Post
by Louie » Thu Aug 19, 2004 8:34 pm
Nightspy wrote:Louie wrote:the ip2 hood will fit ur car perfectly, and it will have clearance for the dc strut bar
Now THAT is what we were looking for. now you just have to ask yourslef if you trust Louie!
I do.
no need to trust me lol. .just ask the many users at srt forums. .i frequent tose forums very much since they have fancy neons and we can use lots of their parts
-
Stonebender
- 2GN Member
- Posts: 793
- Joined: Wed May 12, 2004 8:38 pm
- Location: Scumburg
-
Contact:
Post
by Stonebender » Thu Aug 19, 2004 9:11 pm
Louie wrote:Nightspy wrote:Louie wrote:the ip2 hood will fit ur car perfectly, and it will have clearance for the dc strut bar
Now THAT is what we were looking for. now you just have to ask yourslef if you trust Louie!
I do.
no need to trust me lol. .just ask the many users at srt forums. .i frequent tose forums very much since they have fancy neons and we can use lots of their parts
What? There's other Neon sites?
-
Louie
- Former Jr. Admin
- Posts: 1177
- Joined: Wed May 12, 2004 12:29 am
- Location: Miami, FL
-
Contact:
Post
by Louie » Thu Aug 19, 2004 10:22 pm
Stonebender wrote:Louie wrote:Nightspy wrote:
Now THAT is what we were looking for. now you just have to ask yourslef if you trust Louie!
I do.
no need to trust me lol. .just ask the many users at srt forums. .i frequent tose forums very much since they have fancy neons and we can use lots of their parts
What? There's other Neon sites?
lol..yep
-
0111000001100100
- 2GN Member
- Posts: 186
- Joined: Sun Aug 01, 2004 7:03 pm
Post
by 0111000001100100 » Fri Aug 20, 2004 10:01 am
I talked to some goof at howell and they said the DC front will fit on a non-srt no problem! *mumbles under breath*
STi owner.
-
Nightspy
- 2GN Member
- Posts: 429
- Joined: Wed Jun 23, 2004 1:30 pm
Post
by Nightspy » Fri Aug 20, 2004 10:05 am
You should record that shit then sue when it doesn't fit. That'll fix 'em....well, maybe not.
-
Louie
- Former Jr. Admin
- Posts: 1177
- Joined: Wed May 12, 2004 12:29 am
- Location: Miami, FL
-
Contact:
Post
by Louie » Fri Aug 20, 2004 10:08 am
0111000001100100 wrote:I talked to some goof at howell and they said the DC front will fit on a non-srt no problem! *mumbles under breath*
of course it will fit. .
you cant can't close your hood properly
-
mattb27
- n00b
- Posts: 16
- Joined: Fri Aug 13, 2004 2:02 pm
- Location: Mt. Penn, PA Formerly STL, MO
Post
by mattb27 » Fri Aug 20, 2004 11:49 pm
where are the clearance issues at? looking at pics of the dc bar and vibrant, they look to be at about the same height. Is it on the underside of the hoods bracing that is different? I had planned n getting this bar but I don't want to if I am going to have too many problems, I'll just save a few bucks and get the vibrant bar.
-
Louie
- Former Jr. Admin
- Posts: 1177
- Joined: Wed May 12, 2004 12:29 am
- Location: Miami, FL
-
Contact:
Post
by Louie » Sat Aug 21, 2004 12:15 am
yea ,srt4 hood has a channel that it can run in
-
mattb27
- n00b
- Posts: 16
- Joined: Fri Aug 13, 2004 2:02 pm
- Location: Mt. Penn, PA Formerly STL, MO
Post
by mattb27 » Sat Aug 21, 2004 9:29 am
thanks for the response, I had seen it listed on a site for the regular neon but it had the same part number as the one for the srt-4 so i thought about ordering it. I guess I will just order the vibrant bar, I was hoping for a non adjustable, but I had descent luck with my last bar that was adjustable, it held up for over two years on the car.