Part Number Request: wheel hub/bearing assembly

Post Reply
esteinmaier
Supporting Vendor
Posts: 3324
Joined: Fri Dec 09, 2005 3:40 pm

Part Number Request: wheel hub/bearing assembly

Post by esteinmaier » Sun Aug 28, 2011 6:35 pm

I'm looking for the 4-lug assembly with the wheel bearing and hub together. If it's gotta be purchased with a knuckle too, let me know what that is please. Thanks homies!
ASP - First NGC SOHC in the 13s and the 12s. First SOHC neon over 500whp. First NGC Neon on MS.
Winston Churchill wrote:Yes, Madam, I am drunk, but in the morning I shall be sober and you will still be ugly.

User avatar
bone-yard-racing
2GN Member
Posts: 2328
Joined: Fri Dec 15, 2006 9:36 pm
Location: York PA
Contact:

Post by bone-yard-racing » Sun Aug 28, 2011 7:44 pm

https://www.napaautoparts.com/Catalog/C ... 20+2020029

Use those they are slightly thicker than the OE 4lugs. Please know the 4lug hubs are very very weak I suggest aginst using them for anything except street driving. You will need 4 lug rotors and brake pads as well just ask for 95 Base model and you will be able to find all of it. Correct me if Im wrong but I believe the 1gn is a differnt spline count than 2gns.

Any reason not to redrill 5 lugs or have custome wheels made?
Image

occasional demons
Junior Admin
Posts: 20306
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun Aug 28, 2011 8:47 pm

KNUCKLE, Front Susp. This is the assembled Knuckle/Bearing /Hub

4626294 1 (Cast #4626244-5) (4-Stud), Right
4626295 1 (Cast #4626244-5) (4-Stud), Left



Part number 4626294 was superceded by part number 4897928AA. $174.00

Part number 4626295 was superceded by part number 4897929AB. $200.60
Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

Post Reply

Return to “PN Chassis”