Part Number Request - wiper switch connector harness

Post Reply
lisad
n00b
Posts: 2
Joined: Wed Jan 03, 2018 10:21 am

Part Number Request - wiper switch connector harness

Post by lisad » Wed Jan 03, 2018 11:32 am

Trying to diagnose issues with my wipers as they will not turn off with the switch -- they WILL turn off when you turn off the engine, but then will resume when you turn the car back on. Have to pull fuse to get them to stop. All speeds work except Off, and as I said, even turning the ignition off doesn't break the power as they resume moving as soon as I turn the engine on again. Went to a salvage yard and got a switch, and it's having the same issue. When I opened the steering column to put the new switch in, noticed that the wiper switch harness had cracks, and the headlight switch was melted slightly. I'm not having headlight issues at the moment and the MFS is easier to find the part number. But I cannot find the part number for the wiper switch connector harness. I'm trying that part next!

User avatar
occasional demons
Junior Admin
Posts: 18840
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Re: Part Number Request - wiper switch connector harness

Post by occasional demons » Wed Jan 03, 2018 12:00 pm

You would be better cutting the connector from the JY car. It would be part of the entire dash harness.

Also the dash harness is different between '00 and '01/'02, which is different from '03 through '05.
Bill
Image
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

Post Reply

Return to “PN Electrical”