ACR style wheel clearance

Mopar boy · Post by **Mopar boy** » Fri Mar 11, 2011 9:08 am

Do you know if an ACR style wheel 16x7 with 38mm offset and 225/45/16 will fit under stock 2003 suspension neon ? its not too wide and safe for the strut and tension arm clearance
thx

JeffM · Post by **JeffM** » Fri Mar 11, 2011 11:38 am

viewtopic.php?p=395802#395802

04R/T wrote:The stock ACR size 225/45/16 will fit and clear everything. I run that size on a 7" wheel with a 40 offset, same as the ACR and I'm using SRT springs. Nothing special to do, just bolt them on and go. On the R/T anyway, this size is the same height as the stock 195/50/16, so my speedometer is on the money.

225/50/16 may or may not clear, the spring perch from what I've read here, will be the closest point.

Mopar boy · Post by **Mopar boy** » Fri Mar 11, 2011 12:56 pm

Thx!!!

now i must find cheap 225/45/16 lollll

bone-yard-racing · Post by **bone-yard-racing** » Fri Mar 11, 2011 5:21 pm

^You cant there are 4 or 5 tires that size and the only one with a high enough load rating is the BF Goodrich KDW2

Mopar boy · Post by **Mopar boy** » Fri Mar 11, 2011 5:22 pm

what is load rating??

bone-yard-racing · Post by **bone-yard-racing** » Sun Mar 13, 2011 8:13 am

The weight each tire can safely support

04R/T · Post by **04R/T** » Sun Mar 20, 2011 11:51 pm

bone-yard-racing wrote:^You cant there are 4 or 5 tires that size and the only one with a high enough load rating is the BF Goodrich KDW2

Where are you finding 225/45/16's with a load index of less than 84?