2GN.ORG 2GN.ORG
The best source for the Second Generation Neon - Period.
 
 Watched TopicsWatched Topics   FAQFAQ   RulesBoard Rules   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks  :: Register
 ProfileProfile   GarageGarage   1/4 Mile Table1/4 Mile Table   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Cams ???????????????


 
Post new topic   Reply to topic    2GN.ORG Forum Index -> Engine
View previous topic :: View next topic  
Author Message
evilneon02
pure evil
2GN Registrant


Age: 37
Joined: 27 Jul 2007
Posts: 796
Location: NC

2002 Dodge Neon SXT

Post: #1   PostPosted: Wed Dec 14, 2016 4:31 am    Post subject: Cams ??????????????? Reply with quote

Ok so i took my head to the shop to get work done. Now i cant remember if i put diffrent cams in when i did my build over 5 years ago or iif they are stick srt4 cams but i putt it all back together well come to fine out when timing it for so reason the intake woukd open up then a the exhaust valves would open up immediately after the intake valves closed I'm wondering if the shop didn't put my cams in backwards 1 cam will be 180 out but if you look at the pin on the cam for the cam gear they both sit to the bottom but if you look at the hole on the cam gear itself under the valve cover 1 faces down and one faces up my question is does anybody know anything about the stamp marks on the Cam's themselves I have two different sets of numbers which I'll post pictures up as soon as possible one can has the stamp of abx 676 on one side and the numbers 2101 c. On the other side and the other cam has abx 674 on one side and 2067 c. On the other side of it can anyone tell me based on this info which one is in take and which one is exhaust.
_________________
Brad

http://www.cardomain.com/ride/2315103
http://streetracing.tiora.net/japan/drift/drift1.htm
Back to top
View user's profile Send private message Visit poster's website  
occasional demons
Mr One World
Moderator


Age: 52
Joined: 03 May 2007
Posts: 19834
Location: Ashland, Ohio

2001 Dodge Neon ES

Post: #2   PostPosted: Wed Dec 14, 2016 12:00 pm    Post subject: Reply with quote

You need to turn the one with the dowel hole facing down 180, so it is up.

There are two marks on each gear 180 apart, so you can have them lined up, and one cam out 180.

if this is a 2.0, turn the crank 90 past TDC when turning the cam. Although the damage would already be done by now.

Stock 2.4 cams have a green paint mark on them. 2.0 cams have an orange mark.

The SRT uses the same cams as the other 2.4's.
_________________
Bill


2001 neon ES MTX with '02 R/T PCM
1999 neon 2.4 EDZ MTX
Help support 2GN!
Back to top
View user's profile Send private message AIM Address
evilneon02
pure evil
2GN Registrant


Age: 37
Joined: 27 Jul 2007
Posts: 796
Location: NC

2002 Dodge Neon SXT

Post: #3   PostPosted: Wed Dec 14, 2016 4:28 pm    Post subject: Reply with quote

Thats what i thought but the srt4 gears was messing me up bc they say upon the cam gear with arrows is this common on srt4 cams as for the color i dont know the color they have been to the shop and cleaned so the color is off them.
_________________
Brad

http://www.cardomain.com/ride/2315103
http://streetracing.tiora.net/japan/drift/drift1.htm
Back to top
View user's profile Send private message Visit poster's website  
Display posts from previous:   
Post new topic   Reply to topic    2GN.ORG Forum Index -> Engine All times are UTC - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by p h p B B © 2001, 2005 p h p B B Group
2GN.org Decals
tristateneons.org