SI lip finally installed :twisted:
-
- 2GN Member
- Posts: 880
- Joined: Wed Oct 04, 2006 10:57 pm
- Location: Orlando, FL
SI lip finally installed :twisted:
well i finally installed the lip, not likin it 100% but what can u do, theres a few shots that it looks like its not made to fit a neon, mostly sides. I always wanted the look of the white neon and dark blue neon with the lip, in their cars it looks like it came with the car, not sure if i got the wrong lip but check it out ill post pics tomorrow in the day
-Dres
BWS3 04 Yellow SRT - 1 out of 127
02 SXT - Completely converted to RT/Chrysler (Every bolt on possible) - SOLD
BWS3 04 Yellow SRT - 1 out of 127
02 SXT - Completely converted to RT/Chrysler (Every bolt on possible) - SOLD
-
- 2GN Member
- Posts: 2490
- Joined: Thu Jun 23, 2005 4:57 am
- Location: Bay Area, CA
- Contact:
did you jsut install it? i think they used a heat gun or something to heat up the material, then they might have bent it and stuff to make it fit the bumpers shape.
2002 Neon SST - Gone!
1990 Saab 9000 - Sold
1990 Acura Integra B16A - Sold
1995 JDM Front integra - Traded
1994 BMW 325i Convertible - Traded
1993 Honda Del Sol B18C - Sold
!997 Infiniti Q45 - TOTALED!!!!
1990 Saab 9000 - Sold
1990 Acura Integra B16A - Sold
1995 JDM Front integra - Traded
1994 BMW 325i Convertible - Traded
1993 Honda Del Sol B18C - Sold
!997 Infiniti Q45 - TOTALED!!!!
-
- 2GN Member
- Posts: 880
- Joined: Wed Oct 04, 2006 10:57 pm
- Location: Orlando, FL
-
- 2GN Member
- Posts: 880
- Joined: Wed Oct 04, 2006 10:57 pm
- Location: Orlando, FL
i found out what i messed up on i got the wrong lip in the first place. this is the one i got.
As you see, the lip has fold-out on both top, bottom and each sides. thats why it was impossible to bend cuz the 90% angle flappy things would crack and bend upwards, not sure if you guys get me.
this is the lip i needed. Total flat only fold-outs at the corners, that way u slap it on, heat gun it and dats it, it would work like tape. Flat against the bumper instead of under because of the flappy fold-out parts
As you see, the lip has fold-out on both top, bottom and each sides. thats why it was impossible to bend cuz the 90% angle flappy things would crack and bend upwards, not sure if you guys get me.
this is the lip i needed. Total flat only fold-outs at the corners, that way u slap it on, heat gun it and dats it, it would work like tape. Flat against the bumper instead of under because of the flappy fold-out parts
-Dres
BWS3 04 Yellow SRT - 1 out of 127
02 SXT - Completely converted to RT/Chrysler (Every bolt on possible) - SOLD
BWS3 04 Yellow SRT - 1 out of 127
02 SXT - Completely converted to RT/Chrysler (Every bolt on possible) - SOLD
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
-
- 2GN Member
- Posts: 880
- Joined: Wed Oct 04, 2006 10:57 pm
- Location: Orlando, FL
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
-
- 2GN Member
- Posts: 880
- Joined: Wed Oct 04, 2006 10:57 pm
- Location: Orlando, FL
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
-
- 2GN Member
- Posts: 880
- Joined: Wed Oct 04, 2006 10:57 pm
- Location: Orlando, FL
yea i get u, im just got goin to mess wit it and do it myself, as everyone know if one does it themselves, love goes into it and if u have someone do it, its just a job so ill do it next time, ill post it up though
-Dres
BWS3 04 Yellow SRT - 1 out of 127
02 SXT - Completely converted to RT/Chrysler (Every bolt on possible) - SOLD
BWS3 04 Yellow SRT - 1 out of 127
02 SXT - Completely converted to RT/Chrysler (Every bolt on possible) - SOLD
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
-
- 2GN Member
- Posts: 2490
- Joined: Thu Jun 23, 2005 4:57 am
- Location: Bay Area, CA
- Contact:
Yea... i'll help out too since I did have that lip as well...
What I did was covered the bottom lip of the front bumper with it... Look at pics...
Hope that helps out a bit... But anyways it goes there's alot of work that will be required for it to be like Tiol's...
But the 99-00 lip looks a bit easier...
What I did was covered the bottom lip of the front bumper with it... Look at pics...
Hope that helps out a bit... But anyways it goes there's alot of work that will be required for it to be like Tiol's...
But the 99-00 lip looks a bit easier...
2000 2.4L Turbocharged Neon (The Monster)
2005 5.7L Hemi Jeep Grand Cherokee (SRT8 Clone)
2005 5.7L Hemi Jeep Grand Cherokee (SRT8 Clone)
No one listens. I DIDN'T have a 92-95 nor a 99-00 Civic lip.
I had a real deal INTEGRA type-r lip from Japan. I've posted links and sent PM replies to people who've asked where to get them and what to get, but no one listens. *sigh*
I'm making a lip for a 01-02 R/T front bumper out of something.
Should be tight.
I had a real deal INTEGRA type-r lip from Japan. I've posted links and sent PM replies to people who've asked where to get them and what to get, but no one listens. *sigh*
I'm making a lip for a 01-02 R/T front bumper out of something.
Should be tight.
-
- 2010 Platinum Contributor
- Posts: 8357
- Joined: Tue Aug 22, 2006 8:43 pm
- Location: Toledo, OH
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
How??... I know what lip mztykal used cuz I actually read his post here and on neons.org... We are talking bout the lip that Tiol used on his neon.... Guess I have to show pics to make some peeps understand...Opi wrote:^:laughing3:
Ah ha, you all got
Notice the differences between the lips...
This is Tiol's neon with the 99-00 civic type r lip like the person that started this thread has and trying to do as (and what I was tyring to do as well)...
And this is mztykal's neon with the imported Integra lip...
Now can you see the difference...
Think you just got opi...
Edited for the tard...
Last edited by z3roneo on Thu Jan 18, 2007 2:20 pm, edited 2 times in total.
2000 2.4L Turbocharged Neon (The Monster)
2005 5.7L Hemi Jeep Grand Cherokee (SRT8 Clone)
2005 5.7L Hemi Jeep Grand Cherokee (SRT8 Clone)
-
- 2010 Platinum Contributor
- Posts: 8357
- Joined: Tue Aug 22, 2006 8:43 pm
- Location: Toledo, OH
That's the pwnage I was talking about.mztykal wrote:No one listens. I DIDN'T have a 92-95 nor a 99-00 Civic lip.
I had a real deal INTEGRA type-r lip from Japan. I've posted links and sent PM replies to people who've asked where to get them and what to get, but no one listens. *sigh*
I'm making a lip for a 01-02 R/T front bumper out of something.
Should be tight.
Modify your Car • Modify your Body • Modify your Life
hey mine is a 99-00 civic type r lip. I've cutted it in half in the middle and shorten it to fit the side. The lip is riveted to the bumper and molded in
that's all folks !!
that's all folks !!
neon 98 dohc sold
neon 2002 patriot blue jdm shitttt sold !!
NYG ACR 95 COUPE sold to 1972demon
BMW 1991 318is coupe swapped inline-6 2,5L schrick 288 cams.
neon 2002 patriot blue jdm shitttt sold !!
NYG ACR 95 COUPE sold to 1972demon
BMW 1991 318is coupe swapped inline-6 2,5L schrick 288 cams.
-
- 2010 Platinum Contributor
- Posts: 8357
- Joined: Tue Aug 22, 2006 8:43 pm
- Location: Toledo, OH
-
- 2GN Member
- Posts: 880
- Joined: Wed Oct 04, 2006 10:57 pm
- Location: Orlando, FL
well thanks alot guys for all the help, not trying to be a pain or anything, but can someone point me at the right direction were i can get the si lip 99-00? will the ebay one work? should i pay more for the polyuthane? can someone show me a link were they explain step by step how to do it? i payed 185$ for my lip which because of the fact its under my car, im sweaping the streets of miami cuz its to low. Help fellas honestly, ive broken 3 clips on it already with speedbumps lol check the pics, u can see
-Dres
BWS3 04 Yellow SRT - 1 out of 127
02 SXT - Completely converted to RT/Chrysler (Every bolt on possible) - SOLD
BWS3 04 Yellow SRT - 1 out of 127
02 SXT - Completely converted to RT/Chrysler (Every bolt on possible) - SOLD