How to replace this? LDP Hose

spencersummerfield · Post by **spencersummerfield** » Sat Mar 20, 2010 11:10 am

Hey I need to know how to replace this hose, it is finally cracked.

#15 in the image "Purge Line" it is brittle and needs to be changed, but I don't know if it's 1 meter or 4 meters long.

Anyone had to replace this or have better pictures of where the line goes??

Thanks.

Post by **occasional demons** » Sat Mar 20, 2010 11:43 am

I don't think it is this one...
viewtopic.php?t=28793&highlight=

But I think it is the one that goes to the purge solenoid underneath the brake booster. If it is the same place as the '01/'02 models. There should be a vacuum line that runs from the TB around the PDC to below the brake booster.

But don't hold me to that.

Edit: That little green cap in the pic (left of the booster) should be the service port.

spencersummerfield · Post by **spencersummerfield** » Sun Mar 21, 2010 12:37 pm

Thanks, I removed the LDP yesterday to find that the hose is like 2 inches long.. now I need to get a part number for it. ANd I am going to order the PT hose on Monday.