How to: change control arm bushings

Jenni
2GN Member
Posts: 2499
Joined: Tue Aug 23, 2005 1:33 pm
Location: Berlin, Germany

How to: change control arm bushings

Post by Jenni » Sat Feb 10, 2007 6:14 am

To change the control arm bushings is not tooo heavy at all. Very helpful are a lifting platform, bench vice, one impact screwdriver and 3 hours time. Special tool is not needed.
1. buy bushings. In the picture PU-bushings for the PT Cruiser
Image

Front end jack up and
Image

remove front wheels
Image

Then remove the anti-roll bar. That is relatively simple...

We began on the driver's side. Screw from rear bushing remove. Those is at least 20" long and sticks much, like all the others also…
Image

front screw remove
Image

remove 3rd screw (behind the brake)
Image

and in such a way the part looks then
Image

Now it becomes excitingly: The old bushings must be removed. We squeezed the bushings out with the help of a bench vice.
Image

Now the old rubber bushes must be removed from the metal bush. We burned that rubber things down
Image

and then the remainders with a knife removed.
Image

The new bushings can be pressed in then completely easily with a bench vice
Image

and in such a way the whole looks then with new bushings
Image

Installation completely simply in reverse order.

Next the passenger side. There one of the screws for the control arm hides itself BEHIND the lower engine mounting .
Image

this must be removed thus
Image

The rest is here exactly the same as on the driver's side. To assemble the joint must be the control arm pressed downward with a as long as possible lever.
Image

And thus the whole would be finished...
Image

A view into our garage
Image
Image

Thank you at Martin for the large assistance!!!

Please excuse my google-english... 8)

latief
2GN Member
Posts: 1483
Joined: Sun May 14, 2006 11:32 am
Location: Gainesville, Florida

Post by latief » Sat Feb 10, 2007 9:39 am

excellent write up!!

User avatar
kc2005ptgt
Former Moderator
Posts: 6587
Joined: Wed Dec 14, 2005 7:39 pm
Location: Kansas City, MO
Contact:

Post by kc2005ptgt » Sat Feb 10, 2007 11:51 am

Wohnst du in Berlin?
Ich nahm ein wenig deutsches in der Schule, so ist es nicht ganz gutes das! Dein Auto schaut prima! Die Informationen ist gut, danke!
SOLD 5/13- 2005 Chrysler PT Cruiser GT Convertible | 2.4L Turbo HO | Bright Silver Metallic
SOLD 7/09- 2002 Dodge Neon ACR | Flame Red
The Offical: Sold My Neon Even Though I Swore I Never Would Club | Member #777

Image

User avatar
Marthby
2GN Member
Posts: 482
Joined: Fri Jan 20, 2006 6:24 am
Location: NorCal

Post by Marthby » Sat Feb 10, 2007 2:33 pm

Very nice right up! :biggthumpup:
Sig Applications.

Apply here. haha tricked ya' bitch!

User avatar
Canada
Junior Admin
Posts: 4816
Joined: Tue Jun 28, 2005 4:05 pm
Location: Island Grove, Ontario, Canada

Post by Canada » Sat Feb 10, 2007 5:52 pm

great write up! Is that Marrakas car on the hoist in the last picture...

Jenni
2GN Member
Posts: 2499
Joined: Tue Aug 23, 2005 1:33 pm
Location: Berlin, Germany

Post by Jenni » Sat Feb 10, 2007 10:09 pm

No, thats my car. Marakka has american licence plates.

Yes, it is in Berlin and i live there.
Your german sounds good...

User avatar
Canada
Junior Admin
Posts: 4816
Joined: Tue Jun 28, 2005 4:05 pm
Location: Island Grove, Ontario, Canada

Post by Canada » Sun Feb 11, 2007 5:25 pm

I'm sorry. I forgot you went to the 2003+ rear end and installed the lights n the bumper. It looks really good!

JerryR
2GN Member
Posts: 79
Joined: Thu Jan 11, 2007 4:45 pm

Post by JerryR » Sun May 24, 2009 5:15 pm

going to use your HT next week i'll recive my bushings from modernperformance. thanx for the writeup :thumbup:
look @ my Website www.JerryR.eu

Image

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12737
Joined: Sat Dec 25, 2004 8:58 am

Post by BlackRoseRacing » Mon May 25, 2009 8:48 am

before you tear into the car, pick up some Liquid Wrench L112 penetrant.
http://www.gunk.com/CAT_L112.asp
The reason I specify this spray, it's the same formula as the Mopar penetrant that runs 3 times the price.
Spray this penetrant into the frame rail hole soaking the bolt and nut for the LCA bushing.This bolt is known to be a pain in the but to remove and soaking it a head of time will ease in the removal.

User avatar
GWing
2GN Member
Posts: 37
Joined: Tue Feb 10, 2009 10:55 pm
Location: Canada, Sask

Post by GWing » Mon May 25, 2009 5:21 pm

one question.....how do you remove the vertical bushing from the control arm? what do you use to remove it a bench vice and????? HALP! HALP!!!!!
~00 Neon LE 2.0L MTX~
~95 Neon Sport 2.0L DOHC MTX Project Car~

Boyscoutgonebad
2GN Member
Posts: 365
Joined: Tue Jun 03, 2008 2:52 pm
Location: Findlay Ohio

Post by Boyscoutgonebad » Mon May 25, 2009 11:28 pm

GWing wrote:one question.....how do you remove the vertical bushing from the control arm? what do you use to remove it a bench vice and????? HALP! HALP!!!!!
Fire! I just used the Acetylene torch and burned them all out. Small propane torch would work as well, it'll just take a little longer.
Image

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Tue May 26, 2009 7:26 am

Haha "google-english". Great write-up, thank you :)
Image

User avatar
randomZERO
2GN Member
Posts: 873
Joined: Sun Dec 02, 2007 3:34 am
Location: Baltimore

Post by randomZERO » Mon Jun 22, 2009 8:41 pm

Excelent writeup. Just finished the front end up and it wasn't bad at all. I soaked everything in wd40 as soon as I thought about doing this and again when I ordered the bushings and one last time the night before the install. My verticals fell out upon removal which was real encouraging but the new ones made me fall inlove with my car again. The best way to get the old bushings out is to heat the collars in the center of the bushings then have a friend or in my case my dad take a deep socket and an extension and tap out the collar once the bushings around it melts the just push the rubber out. Rear will be easier because I'm swapping in dcr adjustable control arms. Oh the only bolts I had problems with was the swaybar bracket bolts snapping but I ordered all new stuff for that anyways so fuck them. But yes as others have said propane at the very least is necesary to do this.
Image


viewtopic.php?t=33260<<<<<Pics & Mods

moorepower1
n00b
Posts: 12
Joined: Tue Jul 28, 2009 9:20 am
Location: Nebraska

Post by moorepower1 » Sat Aug 08, 2009 9:44 pm

Just a notation, on a 2000 atx, I found out today that you have to drop the K member on the drivers side to get the front bolt out. It hits the trans case when it is only half out. It is just one more bolt so it is not that big of deal.
2000 atx R/T exhaust and bumper SRT springs and sway bars Tokigo blue struts prothane bushings, bars and a arms

User avatar
nerox
2011 Silver Contributor
Posts: 939
Joined: Sun Dec 20, 2009 10:51 am
Location: United Kingdom

(none)

Post by nerox » Sun Dec 20, 2009 10:54 am

mine had an advisory on MOT that these need changing (not sure if it means both sides)

it seems though that you cant buy just the bushings in England so i have bought the pair of entire replacement arms .... not looking forward to doing it though.

I can change oil, plugs, other service items, brake discs, exhaust etc just the basics but i dont know if i will be able to do this, never tried it before!

c987long
2GN Member
Posts: 725
Joined: Sun Mar 16, 2008 8:32 pm
Location: Toledo, ohio

Post by c987long » Sun Dec 20, 2009 11:50 am

Boyscoutgonebad wrote:
GWing wrote:one question.....how do you remove the vertical bushing from the control arm? what do you use to remove it a bench vice and????? HALP! HALP!!!!!
Fire! I just used the Acetylene torch and burned them all out. Small propane torch would work as well, it'll just take a little longer.
i soaked them in brake cleaner, then took out a lighter.. and it was cool.. imo
2001 neon r/t sold
98 sport turbo- built motor 2.0 ngc DOHC, powered by srt ecu and hp tuners
esteinmaier wrote: We all know that an SRT4 wing is the Chuck Norris of car parts.
occasional demons wrote: Dude, your neon is all the sex you'll ever need!
:lol:

User avatar
nerox
2011 Silver Contributor
Posts: 939
Joined: Sun Dec 20, 2009 10:51 am
Location: United Kingdom

Post by nerox » Thu Apr 01, 2010 5:19 pm

have bought new arms and put the prothane bushings onto them.

have burned out the old ones no problem, cleaned it all up and got the horizontal one in real easily and i can press the bottom piece of the vertical in but the top of the vertical will not go in, i have tried g clamp and vice and a press but it just wont go in, have used lots of grease.

it seems that there is a small lip on the edge of the metal sleeve which is on the arm on this top side which is stopping it going on, shal i sand this down or will it cause problems ?
Official "I'm gonna drive my Neon until it dies" Club Member UK#1

Image

occasional demons
Junior Admin
Posts: 20304
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Thu Apr 01, 2010 8:05 pm

Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

brandon mitchel
n00b
Posts: 9
Joined: Thu Sep 09, 2010 12:47 am

Post by brandon mitchel » Wed Feb 09, 2011 10:54 pm

Thanks for the information! This is really nice. I will now be able to change my control arm bushing on my own. Thanks to this.

daaboots
2GN Member
Posts: 762
Joined: Wed Mar 22, 2006 8:22 am
Location: Ottawa, ON
Contact:

Post by daaboots » Wed Mar 30, 2011 1:03 pm

How long do the prothane bushings last compared to the OEM ones? I'm tired of replacing mine every 50K kilometeres.
2005 SX 2.0 - http://www.cardomain.com/ride/2092484
Rear sway bar brackets on sale! - viewtopic.php?t=19840
My Feedback - viewtopic.php?t=10546
Image

Dodge Aries K
2GN Member
Posts: 62
Joined: Sat Apr 11, 2009 2:08 am
Location: Machesney Park, IL

Post by Dodge Aries K » Wed Mar 30, 2011 8:06 pm

I'm in the need of doing this... doesn't seem TOO awful. Oh, daaboots, do you still make those rear sway bar brackets?
-Karl Bonfiglio

sxxxt
2GN Member
Posts: 1667
Joined: Tue Oct 16, 2007 7:43 am

Post by sxxxt » Wed Mar 30, 2011 8:10 pm

ok this does not look like what he installed.....
how does mine go in..
Image
does it go like this:
Image
is the way i have it set up the same as the picture
Image

BrownBeast
n00b
Posts: 14
Joined: Thu Mar 31, 2011 8:34 am
Location: Johannesburg, South Africa

Post by BrownBeast » Wed Apr 06, 2011 1:13 am

hmmm... that's strange, the last mechanic I took my car to told me you can't change just the bushing on a neon... and you have to change the entire control arm :S... well, I suppose it's good that I decided not to let him touch anything else, as after the major service I had squeeking brakes, and one of my indicators works sometimes :O
All I saw was a brown flash :o

occasional demons
Junior Admin
Posts: 20304
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Apr 06, 2011 7:12 am

Most shops would rather just replace the whole arm, than press in new oem type bushings. Installing prothane or ES bushings would boggle these mechanic's minds.


For the customer, there is prolly little difference in cost, as they would charge more for the labor of changing the bushings. With a whole new arm, there is a new ball joint also, so it is insurance for them, that it will not return before the short warranty period.
Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

User avatar
esfan
2011 Silver Contributor
Posts: 1099
Joined: Tue Feb 24, 2009 12:19 pm
Location: San Diego, California

Post by esfan » Wed Apr 06, 2011 1:40 pm

I guess I'll just get the full set of the LCA and avoid those pushing and pulling and burning issues. The write up is really good however.
Fan
2000 Dodge Neon ES
Official "I'm Going to Drive My Neon till it Dies" Club #52
Image

alsey_seven
2GN Member
Posts: 1167
Joined: Mon Sep 11, 2006 12:36 am
Location: escondido, Ca

Post by alsey_seven » Wed Apr 06, 2011 2:11 pm

i need to replace the ball joint.. but thnking on just replacing the whole control arm
Official "I'm Going to Drive My Neon till it Dies" Club #000043 For 2000 neon

Official "I'm Going to Drive My Neon till it Dies" Club #000125 For 2001 R/T


Image

User avatar
greybox
2GN Member
Posts: 97
Joined: Fri Jan 28, 2011 12:27 pm

Post by greybox » Thu Aug 04, 2011 6:46 pm

I have no vice and no garage....and no torch...is it better to just buy a control arm w new bushings already installed and skip over the torch and vice parts for the extra cost?

OB
Former Moderator
Posts: 9686
Joined: Tue Nov 15, 2005 9:38 pm
Location: Bay Area, CA

Post by OB » Thu Aug 04, 2011 9:25 pm

^Absolutely, if you're not upgrading to urethane, a complete unit with bushings and ball joints from the dealer is by far worth the extra cost. Be prepared to pay $200 per side, give or take.
-Derek

|Donate to 2gn|Feedback || OB's | GozziFab | All Business |


User avatar
greybox
2GN Member
Posts: 97
Joined: Fri Jan 28, 2011 12:27 pm

Post by greybox » Thu Aug 04, 2011 9:48 pm

Cool, thanks...I noticed on ebay they are $105 ea w bushing and new ball joints...would like poly bushings but don't want to muck with it right now.

OB
Former Moderator
Posts: 9686
Joined: Tue Nov 15, 2005 9:38 pm
Location: Bay Area, CA

Post by OB » Thu Aug 04, 2011 10:11 pm

I was referring to OEM pricing, of course ebay will have knock offs for half the price. Not even something I would consider personally, but that's not to say it isn't a quality product. I just prefer not to learn the hard way when it comes to critical parts of the car. I'm sure there are name brand aftermarket units that would strike a balance between OE quality and budget.
-Derek

|Donate to 2gn|Feedback || OB's | GozziFab | All Business |


Post Reply

Return to “HT Chassis”