(_SxXxT_) 7/15/13. The car runs
Sick man, I'm digging the tinted guages, and the placement of the one to the right
www.JohnyR.net - Web development
Yea I deff want to get the acr cut outs but don't know where to find them...
Here's some pics of yesterday's progress.
First off here's a pic of what I did to almost everysingle peice of my interior.. Sanded the texture out..
Next had to modify my b pilliar slightly.
Then I preped for primar filler
Then put 3 thick coats of primar builder
This is how the bar looks all done.. Srt seats with seatbelts and seat belt harness bar..
Here's some pics of yesterday's progress.
First off here's a pic of what I did to almost everysingle peice of my interior.. Sanded the texture out..
Next had to modify my b pilliar slightly.
Then I preped for primar filler
Then put 3 thick coats of primar builder
This is how the bar looks all done.. Srt seats with seatbelts and seat belt harness bar..
your interior looks sexier every time i check back on your log..
My Progress Log
Official "I'm Going to Drive My Neon till it Dies" Club #000104
I CANT SEE THE PICTURES NOOOOOOOOOO!
Edit: nvm works now looks sexay
Edit: nvm works now looks sexay
www.JohnyR.net - Web development
so the rear seatbelt bar was buggin the crap out of me and the seatbelt wasnt long enough so i decided to get the bar re-powdered and when i took the bar out i wanted to do something different with my bottom half
b pillars.
you can see the old suede and how it turned purple. and the new leather wrapped b pillar.
this leather matches my arm rest leather perfectly.
b pillar installed
you can see the awsome new gloss black powder job.
just another shot of the bpillar installed
some upcomming updates...
More stuff wrapped in leather
new 52mm gauges probably glowshift
More powdercoated stuff
pt cruiser front brake conversion
hella horns
not too crazy list cuz im tryin to get a house and iv got a baby on the way in March
b pillars.
you can see the old suede and how it turned purple. and the new leather wrapped b pillar.
this leather matches my arm rest leather perfectly.
b pillar installed
you can see the awsome new gloss black powder job.
just another shot of the bpillar installed
some upcomming updates...
More stuff wrapped in leather
new 52mm gauges probably glowshift
More powdercoated stuff
pt cruiser front brake conversion
hella horns
not too crazy list cuz im tryin to get a house and iv got a baby on the way in March
-
- Spam Avenger!
- Posts: 9003
- Joined: Wed Aug 02, 2006 2:49 am
- Location: Kokomo, IN
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
so i worked on the sub box and heres where it sits as of now..
have to put two good layers of tape
criss crossed
i needed the sub to fit a little farther bak so i had to cut a section out not a big deal.
then put a layer of resgin down and then cut up some fiberglass cloth and apply... the more the better. needs to b strong.
after it hardens pull out
trim the edges
test fit make sure it looks the way you want it too.... next ill b making this thing like a rock.. and then making the sub ring and hopefully by sunday it will b a sub enclosure and by next weekend have everything finished and have good quality sound system..
have to put two good layers of tape
criss crossed
i needed the sub to fit a little farther bak so i had to cut a section out not a big deal.
then put a layer of resgin down and then cut up some fiberglass cloth and apply... the more the better. needs to b strong.
after it hardens pull out
trim the edges
test fit make sure it looks the way you want it too.... next ill b making this thing like a rock.. and then making the sub ring and hopefully by sunday it will b a sub enclosure and by next weekend have everything finished and have good quality sound system..
-
- 2GN Member
- Posts: 211
- Joined: Mon Sep 12, 2011 11:35 am
- Location: Greensburg, PA
-
- 2GN Member
- Posts: 3371
- Joined: Wed Mar 14, 2007 4:50 pm
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI