SOHC ITB's?

mikeb818 · Post by **mikeb818** » Wed Feb 24, 2010 9:14 pm

hybrid-Srt2001 wrote:thats why us smart californians have stock motors for smog time....

or we go to Armenians who just pass you for $150

Post by **racer12306** » Wed Feb 24, 2010 9:15 pm

yeah, that's a good thing to post on a public forum.

mikeb818 · Post by **mikeb818** » Thu Feb 25, 2010 12:06 am

you dont understand haha. im serious. all of them roll here with bmw m3's running straight pipes and i asked one where he does it and he says "I'm armenian bro, I go to glendale and get it passed" trust me.

stdlystdmufn · Post by **stdlystdmufn** » Thu Feb 25, 2010 12:13 am

i don't think you undertood what racer12306 was REALLY saying.

mikeb818 · Post by **mikeb818** » Thu Feb 25, 2010 12:22 am

no i dont. can you elaborate

stdlystdmufn · Post by **stdlystdmufn** » Thu Feb 25, 2010 10:40 am

Edited: (overreaction)... if you wanna post everything illegal that you do in a google searchable forum be my guest.

anyway more updates on the ITBs!!!

Post by **occasional demons** » Thu Feb 25, 2010 11:51 am

The Armenian hit man will take of business from here on out. Back to topic. Meow!

mikeb818 · Post by **mikeb818** » Thu Feb 25, 2010 4:22 pm

haha im not bein an ass. i have friends who are armenian who do it. im not be racist. but anyway back to the ITB!

p.s. sorry for offending anyone

Post by **racer12306** » Thu Feb 25, 2010 8:12 pm

Totally missed the point.

That is illegal, regardless of who is doing it. It's stupid to put illegal activities up on a public forum.

Post by **occasional demons** » Thu Feb 25, 2010 8:18 pm

racer12306 wrote:Totally missed the point.

That is illegal, regardless of who is doing it. It's stupid to put illegal activities up on a public forum.

This.

I didn't see any racism in what you posted, just if you caused someone's illegal activities to be cracked down on, (due to drawing attention to it) specifically all those well-to-do boys suddenly having to park their toys, somebody will likely pay.

03blackrt · Post by **03blackrt** » Thu Feb 25, 2010 8:51 pm

Not much of an update, but there will be a vacuum block that looks something like this. It'll hold the MAP sensor and IAC. A 3/8" NPT inlet (filtered air) and 3/8" NPT outlet (to be connected to the vacuum source on the ITB's), and four 1/4"NPT ports for running vacuum accessories. The block measures roughly 5.5” x 3” x 1”.
and can be remotely mounted for a nice, clean look.

Mr Josh Zombie · Post by **Mr Josh Zombie** » Thu Feb 25, 2010 8:53 pm

racer12306 wrote:Totally missed the point.

That is illegal, regardless of who is doing it. It's stupid to put illegal activities up on a public forum.

What you post can and will easily be found by anyone.

Post by **occasional demons** » Thu Feb 25, 2010 8:55 pm

Remote mount FTW!

Edit: If anyone is wondering, a 1/4" port will work fine for plumbing the PCV to. Ever since plumbing the PCV into my remote mount IAC, my catch can does not fill nearly as bad. (it has to share the vacuum line with the IAC, cutting back on flow a little.) There has been no sign of moisture build up in the crankcase, after 10,000 miles, so it has been a win/win.

03blackrt · Post by **03blackrt** » Thu Feb 25, 2010 9:09 pm

The four 1/4" NPT ports could very easily be opened up to 1/2" NPT or 3/8" NPT too. All of this could easily be changed when I go to have the final piece machined, and that's still a few months away, so I have a bit of time to play with the design.

stdlystdmufn · Post by **stdlystdmufn** » Thu Feb 25, 2010 9:13 pm

looks great

mikeb818 · Post by **mikeb818** » Thu Feb 25, 2010 11:25 pm

woopwoop!!

03blackrt · Post by **03blackrt** » Tue Apr 27, 2010 6:39 pm

Wow, I’ve been slacking on these. I’m guessing it’ll be a while before I get a set machined. Most of the technical details are finished and I’m putting the finishing touches on the final rendering.

INVUJerry · Post by **INVUJerry** » Tue Apr 27, 2010 7:00 pm

Man, I'm stoked about these. I wish I had some money to put towards getting these finalized.

neonslg09 · Post by **neonslg09** » Tue Apr 27, 2010 7:01 pm

mikeb818 wrote:no i dont. can you elaborate

LMAO!! That whole couple of posts was hilarious.

I can't wait either, less AutoCAD, more hands on

03blackrt · Post by **03blackrt** » Tue Apr 27, 2010 7:07 pm

invujerry wrote: I wish I had some money to put towards getting these finalized.

I wish I had money to throw at these. That's really the only thing holding me back. The first set won't be cheap.

Post by **racer12306** » Tue Apr 27, 2010 10:18 pm

neonslg09 wrote:I can't wait either, less AutoCAD, more hands on

Perfecting in AutoCAD minimizes waste.

Plus once you already have AutoCAD, every change is free.

r/tguy02 · Post by **r/tguy02** » Tue Apr 27, 2010 11:12 pm

i like the neon engraving on the TB plates, nice touch. I love CAD, maybe thats why i went to college to learn it

Ntyvirus1 · Post by **Ntyvirus1** » Wed Apr 28, 2010 12:24 am

definintely want.

hul kogan · Post by **hul kogan** » Wed Apr 28, 2010 9:25 am

I was just wondering last week how things were going with these. I'm very interested to see a prototype, as well.

mikeb818 · Post by **mikeb818** » Wed Apr 28, 2010 12:46 pm

if you want a car to test them on. my car is open for testing lol. just ship them out here and i will tell you how they run haha

BillyMike · Post by **BillyMike** » Thu Apr 29, 2010 8:51 am

I"m still interested in set also. Hopefully they will match up with my ported head tho?!?!

BillyMike

Post by **occasional demons** » Thu Apr 29, 2010 9:38 am

BillyMike wrote: Hopefully they will match up with my ported head tho?!?!

BillyMike

Simply port match it, like you would with any other IM on the market. I'm sure for a little extra, you could send a template of your head's ports, and it could be matched.

03blackrt · Post by **03blackrt** » Thu Apr 29, 2010 9:52 am

They will be matched to a standard SOHC gasket (1.75" wide x 1.25" high). Anything up to 2" wide could be made, but it'd be a tight fit.

mikeb818 · Post by **mikeb818** » Thu Apr 29, 2010 2:53 pm

i like tight fits

neonjr · Post by **neonjr** » Mon May 10, 2010 1:16 pm

mikeb818 wrote:i like tight fits

that's what she said. nice pieces.