Search found 1058 matches
- Wed Aug 07, 2013 12:51 pm
- Forum: Engine
- Topic: engine lag
- Replies: 7
- Views: 2746
Random thought.... I know that I've got some noisey lifters that rattle between 3000-5000rpm. Is there some random chance that the knock sensor is picking up on this and retarding the timing? Just a shot in the dark. I poured a bottle of octane boost in there just now so I'll see if it gets any bett...
- Wed Aug 07, 2013 9:15 am
- Forum: Engine
- Topic: engine lag
- Replies: 7
- Views: 2746
I'm not entirely sure how old the plugs are nor the brand. I do know that they were replaced recently, but not too sure how many miles ago that was. As for the gas, it isn't all that old. I drove from Oklahoma to Indiana and then to North Carolina... So I'm pretty sure any old fuel it cleared out. A...
- Tue Aug 06, 2013 10:30 am
- Forum: Engine
- Topic: engine lag
- Replies: 7
- Views: 2746
- Mon Aug 05, 2013 9:25 pm
- Forum: Engine
- Topic: engine lag
- Replies: 7
- Views: 2746
engine lag
Been a while since I posted here. Recently got my Neon back from being stationed in Germany. Here's the deal, and I can't quite nail it down. There's an interesting lag from 3000-5000rpm during WOT. She screams out of the gate and above 5000. I feel a slight shudder too. Seems like she's either over...
- Sat Jun 20, 2009 10:24 am
- Forum: Sell/Buyer Feedback
- Topic: onewickedkid05 Feedback +9
- Replies: 8
- Views: 2473
- Wed Jun 18, 2008 1:35 am
- Forum: Sell/Buyer Feedback
- Topic: TheRandom1 Feedback +34
- Replies: 34
- Views: 16822
- Sun Jun 15, 2008 2:45 pm
- Forum: Sell/Buyer Feedback
- Topic: Bigbird Feedback +5
- Replies: 4
- Views: 1769
- Sat Jun 14, 2008 9:59 am
- Forum: Off-Topic
- Topic: play on.... ummm... letters
- Replies: 18
- Views: 3136
Repost x2 http://forum.2GN.org/viewtopic.php?p=193242&highlight=cmabrigde+uinervtisy#193242 http://forum.2GN.org/viewtopic.php?p=256430&highlight=cmabrigde+uinervtisy#256430 Jesus its almost 4am. Why the hell am I still awake/sober? :tardbang: I wish I had enough to sit around and find/remember pos...
- Wed Jun 11, 2008 10:14 pm
- Forum: Off-Topic
- Topic: play on.... ummm... letters
- Replies: 18
- Views: 3136
I lvoe turkcs!!! I hvae onewd two of tehm in my lfie. Btoh of tehm wree lwreod 3 to 4 ichens, and lkoeod hot! Writing like that sucks. Dude, I'm a truck, bike, boat, and car fiend. Right now I'm working on my 81 chevy P/U (dropped), my 82 KZ440 (bobber), my 05 neon, and an 85 american offshore drag...
- Wed Jun 11, 2008 10:06 pm
- Forum: Sell/Buyer Feedback
- Topic: DouglasSXT Feedback +9
- Replies: 8
- Views: 2363
- Wed Jun 11, 2008 12:26 am
- Forum: Off-Topic
- Topic: play on.... ummm... letters
- Replies: 18
- Views: 3136
Re: play on.... ummm... letters
Aoccdrnig to rscheearch at Cmabrigde Uinervtisy, it deosn't mttaer in waht oredr the ltteers in a wrod are, the olny iprmoatnt tihng is taht the frist and lsat ltteer be at the rghit pclae. The rset can be a toatl mses and you can sitll raed it wouthit a porbelm. Tihs is bcuseae the huamn mnid deos...
- Tue Jun 10, 2008 11:39 pm
- Forum: Off-Topic
- Topic: play on.... ummm... letters
- Replies: 18
- Views: 3136
play on.... ummm... letters
Aoccdrnig to rscheearch at Cmabrigde Uinervtisy, it deosn't mttaer in waht oredr the ltteers in a wrod are, the olny iprmoatnt tihng is taht the frist and lsat ltteer be at the rghit pclae. The rset can be a toatl mses and you can sitll raed it wouthit a porbelm. Tihs is bcuseae the huamn mnid deos ...
- Fri Jun 06, 2008 12:31 am
- Forum: PN Electrical
- Topic: Part Number Request: 6cd changer harness
- Replies: 11
- Views: 7389
- Thu Jun 05, 2008 10:53 pm
- Forum: PN Electrical
- Topic: Part Number Request: 6cd changer harness
- Replies: 11
- Views: 7389
The PN on the connector that I have is 4759529AA. It has a square connector on the changer side and a round 8 pin connector on the radio side. Now like what has been said, this does not work on the 02+ head units. So I hope that the 841AA works on both ends. I willing to venture out and say that it ...
- Wed Jun 04, 2008 10:38 pm
- Forum: PN Electrical
- Topic: Part Number Request: 6cd changer harness
- Replies: 11
- Views: 7389
- Tue Jun 03, 2008 11:07 pm
- Forum: Suspension, Steering & Brakes
- Topic: Shorter end-links on R/T struts dropped with SRT springs?
- Replies: 4
- Views: 1452
When I did my endlinks for my stock struts I found that the collar that goes on there can come apart in three pieces. So went down to the local bolt store (not home depot- a real hardware store) and got some grade 8 bolts that were the right length then figured out the right length on the collars, p...
- Mon Jun 02, 2008 11:24 pm
- Forum: PN Electrical
- Topic: Part Number Request: 6cd changer harness
- Replies: 11
- Views: 7389
Hey, BRR do you know if this harness will work on my application? I just picked up a 4 disk changer from a 00 PL PN 4858522AF The harness that came with it is a PN 4759529AA. But that connector won't work with my radio. So will the 841AA work with my changer and H/U? Just wanna double check before I...
- Sat May 31, 2008 1:25 am
- Forum: Suspension, Steering & Brakes
- Topic: best suspension for good but low ride?
- Replies: 17
- Views: 4252
Ok, i didn't even think about that. So can anyone give a a really good description or comparison of the difference in the ride between a stock SXT/SE and SRT springs on SXT struts? Sorry to sound so anal, I would just hate to buy them, install the, align the dang thing, and then hate the ride and th...
- Wed May 28, 2008 10:27 pm
- Forum: Suspension, Steering & Brakes
- Topic: best suspension for good but low ride?
- Replies: 17
- Views: 4252
Ok So after a little investigation here an on some other forums... Model - Front/Rear spring rate Stock 1st Gen - 140/120 Stock 2nd Gen - 150/120 Stock 1st Gen R/T and ACR - 150/120 Stock SRT-4 / SRT-4 ACR - 170/125 If anyone knows different let me know... cause judgin by that, my stock springs and ...
- Wed May 28, 2008 9:50 pm
- Forum: Suspension, Steering & Brakes
- Topic: best suspension for good but low ride?
- Replies: 17
- Views: 4252
You mean SRT? Thats what I'm really leaning towards. Can anyone tell me the actual ride difference between those and stock SXT or SE springs? I've been in a few SRT that felt like shit, but I don't know if they were modified or what. Hope to get a reply soon or I'll start another thread that might h...
- Tue May 27, 2008 11:04 pm
- Forum: Off-Topic
- Topic: Update: 5/26, Tongue freshly resplit, more suspensions pg 11
- Replies: 363
- Views: 33543
- Tue May 27, 2008 10:28 pm
- Forum: Suspension, Steering & Brakes
- Topic: sway
- Replies: 2
- Views: 980
- Tue May 27, 2008 12:21 am
- Forum: Suspension, Steering & Brakes
- Topic: best suspension for good but low ride?
- Replies: 17
- Views: 4252
- Mon May 26, 2008 11:28 pm
- Forum: Suspension, Steering & Brakes
- Topic: best suspension for good but low ride?
- Replies: 17
- Views: 4252
Yeah, there is a lot that goes into suspension. Thats pretty much what I focused on since I got the car. I've got 1st gen ACR springs on stock struts. 24mm front sway bar, 19mm rear R/T sway bar. Front and rear strut tower bars. Super light wheels and I think 4mm spacers on the rear wheels. The only...
- Mon May 26, 2008 3:04 am
- Forum: Suspension, Steering & Brakes
- Topic: best suspension for good but low ride?
- Replies: 17
- Views: 4252
Thanks for the advice guys. I understand how spring rates and all that works. I just wanted to know what springs or spring/strut combinations give a good ride and look. Hey Balla, aren't progress springs like mucho denero??? I may be better off jerry rigging some stock springs... or maybe some 1st g...
- Sun May 25, 2008 2:57 am
- Forum: Off-Topic
- Topic: The Person Above You!
- Replies: 33099
- Views: 1726980
- Sun May 25, 2008 2:31 am
- Forum: Sell/Buyer Feedback
- Topic: BlackRoseRacing Feedback +110
- Replies: 113
- Views: 95825
- Sun May 25, 2008 2:06 am
- Forum: Suspension, Steering & Brakes
- Topic: best suspension for good but low ride?
- Replies: 17
- Views: 4252
best suspension for good but low ride?
Hey guys... This has probably been discussed, but what would be a decent suspension set up that is low(er) but still rides similar to stock?? i've got 1st gen ACR springs, and after a 18 hour trip to and from galveston I'm pretty much fed up with them. Honestly, I was seriously considering buying a ...
- Wed Apr 30, 2008 7:26 pm
- Forum: Sell/Buyer Feedback
- Topic: yellowpatrol Feedback +12
- Replies: 14
- Views: 7052
http://www.ratemypoo.com/
***Warning*** Not for those with a weak stomache... And prolly not work safe.
p.s.... got this in an email
***Warning*** Not for those with a weak stomache... And prolly not work safe.
p.s.... got this in an email