2GN.ORG

Hey I was just wondering if anyone has a link to a vendor selling shorty eyelids in px8 black. I know there was a guy on srt forums but I cant find him anymore. I think he stopped doing it. Thanks guys!

Andrew

occasional demons wrote:Yes he does.

At least last I knew he did.

Damn you people putting Ideas (lol) into my head!

Do you sell full turbo kits for SOHCs Eric?

If you don't wanna throw boost or spray at it, you need to keep going and spend lots on some higher compression and a nasty cam too. The rest will yield maybe 15whp all put together. 1psi of boost would do that. Haha ok point taken. Once I get my 66 mustang sold and have some more cash maybe I will...

Haha so with the mods I suggested you guys are saying on a dyno Id see no extra WHP gain over stock. I agree suspension, tires and wheels are important and I am upgrading those as well. I was just wondering engine wise what can be done to add power to these RTs. I don`t think my car is slow, I just ...

trojmn wrote:

silversport wrote:so you are saying it is a 2gn iceman but not an R/T one? using the stock bellows would solve this issue?

yes to both.

thanks! O one last question. Does the R/T iceman have a bend in the bellows similar to the AEM? I am assuming you have seen one?

it IS a 2gn iceman. the bend is so that the filter winds up parallel to the ground facing toward the front bumper cover. it may or may not fit the angle of the r/t intake. It looks like its a non-mag angle iceman. see the wear marks? it was rubbing on the inner fender liner making a horrible racket...

So I just bought a 04 R/T 5 speed and I was wondering what you guys think are the appropriate mods to make the most power out of this thing. NOTE: no turbo, no nitrous, and no cam swap. bolt ons only. Im looking for specific brands and sizes. IE MPX 60mm TB. I was thinking. iceman intake, bored stoc...

Hey can anyone tell me from the pic if this is an Iceman for a reg 2gen neon or an R/T. I was told it came off of an R/T but I thought the bellows should be angled a bit? is iceman not like that? thanks! http://i211.photobucket.com/albums/bb62/notapplicable332/iceman.jpg http://i211.photobucket.com/...

Glad that you are okay- looks like your old Neon did its job pretty well. Any interior pics of the new R/T? Does it have leather? **already drooling at the thought** I will try and get some interior pics today. Yes it has leather. Fully loaded as far as I can tell. 6 disk, sunroof, rear view mirror...

Wenuden wrote:Roof looks pretty good for having rolled.

I thought so too. I blacked out so I personally didn't see what happened lol The police said we both rolled though so I could have possibly flipped? the Police went off of the witness...

so here's my new ride, a 2004 R/T. I just made a large order to Chrysler and Modern so let the modding begin! http://i211.photobucket.com/albums/bb62/notapplicable332/rt3.jpg http://i211.photobucket.com/albums/bb62/notapplicable332/rt.jpg http://i211.photobucket.com/albums/bb62/notapplicable332/rt2....

Well as some of you may know I recently wrote off my silver 2005. I ended up hitting another car on the highway and we both rolled. I spent 4 days in the hospital but I am fine! same with the other driver. I have been off the boards for a while just because I lost some of my passion with my last neo...

If you don't hook up a MAP line to the MS, you will have the same fuel at idle as you do at WOT. It won't work awesome like that. I thought it just worked off of RPM and Throttle position? Any suggestions then on attaching the little line to the MS box? i just used rubber vac line to bridge it but ...

Hey, we have a MS2 setup with a srt4 swap and was wondering what would happen if we didn't connect the boost reference to the MS? the little line is a pain and always leaks. We are not using MS for boost control or setting and boost limits. Turbo pressure is run only by wastegate. Thanks!

Here is the actual video from outside of the car of the tranny letting go (or dif or whatever went lol) Yes that is Christopher driving (Canada) http://s216.photobucket.com/albums/cc174/NeonKm/CNN%202011/?action=view¤t=MOV038.mp4#!oZZ4QQcurrentZZhttp%3A%2F%2Fs216.photobucket.com%2Falbums%2Fcc1...

YOU CUT YOUR HAIR!!! Long shutdowns are a good thing. Didn't really seem that long to me though. NYIRP in western NY is the king of long shutdown areas. Fuel dragsters can stop without a chute there and have no worries of hitting the sand. :lol: It's actually somewhat short compared to other tracks...

Here is the Go Pro angle to go along with the other video

PS nothing happens after 1 min 30... I was just too lazy to edit it out lol

http://www.youtube.com/watch?v=Fl1Ntskk5r8

Canada wrote:http://www.youtube.com/watch?v=JuqP44x-G-8

Awesome Video! Did you do one going back up? It's not 1080 was that because of the download? the setting? It looked like you were flying down there lol

Canada wrote:I can't find affordable SS trim rings, but I don't want to go chrome... Hmm time to call local wheel shops and junkyards lol.

You know how I feel about the steel wheel look but if its what you're into get some cheap trim rings and paint them?? maybe even something funky like red?

me 3

You'll get better with practice, just don't hit 1st ;) haha yeah that is a fear of mine! I've come to find out you CAN pull away in 3rd gear... very carefully. Go to pull away, car feels like its going to stall, give it gas sloowwwlllyyyy, realize I'm in 3rd not 1st, say fuggit and keep rolling the...

Slam it now!! or I will come over while your sleeping and do it myself LOL

iThane wrote:

RADARsx 2.0 wrote:

Fuzzyneon wrote: just do it lol to me i would its worth it

fly down, there's lots of people to hitch rides with once your down there

r/tguy02 wrote:i think that thing will need more than a muffler to drive it all the way here

the driver will also need an ass made of stone! LOL that kirkey makes me hurts after a 1/4 mile

Obviously I'm in. Can't let you guys have all that gay old fun without me!

PS this will be the first year I actually have a car in the group photo! PUMPED!

Never, NEVER trust Andrew with a can of nightshade...........believe me! Maybe Chris can handle that for him if he chooses to go that route! LOL it's not the can of nightshade I have a problem with, It's the can of black paint that looks like nightshade that's the issue LOL I learned how to nightsh...

MY 2005 SRT4 ACR Country Of Origin: Belvidere, IL (USA) Make: Dodge Vehicle Type: Passenger Car Passenger Safety Options: Active Restraints, Dual Front Airbags Vehicle Line: Neon LHD [US/ Canada] Series: Unknown value in position six Body Style: Sedan Engine Type: 2.4L DOHC Intercooled Turbo Check D...

wow how did you launch differently on that last run?? Your 60 improved by a lot!

But this car is looks amazing...just need to nightshade the tails in imo Never, NEVER trust Andrew with a can of nightshade...........believe me! Maybe Chris can handle that for him if he chooses to go that route! LOL it's not the can of nightshade I have a problem with, It's the can of black paint...