2GN.ORG

Hello, I was just wondering if this is the proper term for the part, "shifter linkage"? Is this a relatively easy diy job? Would this be a part that can only be ordered from the dealer, or would i be able to pick one up from the junk yard? Thanks in advance for your help! Mike http://i4.photobucket....

Feedback For: Mopar65 You in the transaction(seller or buyer): Buyer Feedback Rating: +1 Comments on the transaction: Great guy to deal with! Great communication, fast shipping with updates every step of the way... even built a custom box to ship intercooler without it being damaged!! Thanks again!!

Feedback For: CASPERAMC
You in the transaction(seller or buyer): Buyer
Feedback Rating: A+
Comments: Part arrived exactly as described. Great communication and incredibly fast shipping. Would definitely do business with again. Thank you!!

Hey, I just wanted to let everyone know, just in case someone else runs into this problem, the end results. I had to heat the knuckle with the torch and then pound the bolt until flush with the knuckle. At this point it was pretty severely mangled and bent making the job even easier lol. Then use a ...

Diablo-- Didnt realize that fastenal.com was potentially a local store. I went to their website and there is a store located relatively close to me, so once this nightmare of a bolt has been removed, I'll head over to them. Thank you for the heads up on that place!! Also, not that it makes any real ...

Hey, Just wanted to get back to you guys, thanks again... In my haste to do the swap, I found the "how to" here on the forum and started on my way. I followed everything verbatim and once I had the nut off of the long bolt is when I finally realized, "what the hell am I doing, I don't need to be dis...

Thank you so much for the quick replies!! Is the torch mentioned someting that I can pick up at the auto parts store? (probably auto zone) How pricey is the torch? Am I heating up the length of the bolt? Also, can I pick up a new bolt to use? The one thats in there now... the end is shot and cannot ...

Hey guys, Ive got a quick question. While doing a rear disc conversion I seem to have ran into a problem. The lower long control arm bolt is completely stuck and will not budge. I have tried coaxing it with vibration (via 1/2 impact wrench, ratchet w/breaker bar for leverage, trying to tap it on the...

Feedback For: XxWhiteNeonxX
You in the transaction(seller or buyer): Buyer
Feedback Rating: +1
Comments on the transaction: Great communication, VERY fast shipping!! Hope to do business with again... Thank you!

Feedback For: srtgtr34
You in the transaction(seller or buyer):Buyer
Feedback Rating: +1
Comments on the transaction: Great guy to deal with! Very helpful, fast shipping and good communication! Thank you again!

Feedback For:thecause17
You in the transaction(seller or buyer): Buyer
Feedback Rating: +1
Comments on the transaction: Great transaction! Great communication and VERY fast shipping. Thank again for the smooth transaction!!

Feedback For: Raekwon
You in the transaction(seller or buyer): Seller
Feedback Rating: +1

Comments on the transaction: Patient and understanding. Great doing business with you! Thank you again!!

Contact Info: Name - Mike Prezioso Email - prez3636@yahoo.com Location - Selden, NY Hey, As you can see I'm going to be selling my car and wanted to put it up on here before anywhere else. I am looking to get $5000 OBO, because it does have very low 'actual' milage and a fair amount of extras includ...

Feedback for: Craz1000
Person in Transaction: buyer
Rating: +1
Comments: Fast shipping, good communication and part was exactly as described. Thanks Again!

Feedback For: jonnymopar
You in the transaction(seller or buyer): buyer
Feedback Rating: +1
Comments on the transaction: Got a set of his bushings in the mail, look awesome, fit perfect and work great! Thank you!!!

Feedback For: racer12306
You in the transaction(seller or buyer): Buyer
Feedback Rating: +1
Comments on the transaction: Great part, exactly as described. Easy communication... overall perfect transaction. Thanks again!!!

Feedback For: Marthby
You in the transaction: Buyer
Feedback Rating: +1
Comments on the transaction: Bought a Mpx polished throttle body from him. It came exactly as described in great shape and with all of the hardware. Fast shipping, great to deal with! Thanks again!!

Feedback For: SuperRT
You in the transaction(seller or buyer): buyer
Feedback Rating: +1
Comments on the transaction: Super fast shipping, item exactly as described. Great communication... thanks again!!!

Feedback For: Nitehawk
You in the transacttion: buyer
Feedback Rating: +1
Comments on the transaction: Awesome seller, great communication and fast shipping!! Thanks again man!!

Feedback For: measy27
You in the transaction(seller or buyer): buyer
Feedback Rating: +1
Comments on the transaction: Nice guy, great item exactly as described. Good transaction, Thanks again!

awesome... thanks alot!

Is this setup, 02 SE trans/clutch/pcm ok to run with an 02 r/t engine?
Thanks,
Mike

Feedback For: thttxboy
You in the transaction(seller or buyer): buyer
Feedback Rating: +1
Comments on the transaction: Good communication, fast shipping, great guy to deal with!! Thank again!

Hey,
I also just found a couple of other R/T engines, 02 this time. Would that engine swap in without to much complication? I am still going under the assumption of the engine being blown? What all would be involved in this swap?
Thanks again,
Mike

Hello, Im not sure if this specific question has been covered or not. I did a bit of searching and couldnt find anything so I figured I would ask. Anyways, I have an 02 SE and I am pretty sure that the engine is blown. So I am thinking that I will swap in an R/T engine instead of putting another sta...

Feedback For: kc2002acr
You in the transaction(seller or buyer): Buyer
Feedback Rating: +1
Comments on the transaction: Great guy and communication. Exhaust tips came fast and as described. Thanks agian!!!

**Was scammed on the other .org and wanted to try to protect members here from this seller.** Neostylin, Robi Post, was "selling" a magnum intake manifold for $200. I replied to his post and paid directly through paypal within 24 hours.(Payment made on June 1st.) At that time communication was still...

Well my car has the gray key/keyless entry. I hate to do this, but hear comes a dumb question.... I should be looking for a pcm from an r/t or acr that had the black key then correct? Will that one need to be reprogrammed(black keyed pcm)? Sorry but in doing all of this I really wasnt heavily consid...

Well the mileage is really too big of a concern. I mean obviously with the gas prices like they are I dont want the mileage to go down that much, but Ive already decided to go this route so... About the pcm, where do you think the best place to pick one up would be? How would I be able to tell about...

Hey guys, I have an 02 SE mtx w/33k. Im doing the magnum head swap and Id like to know all the parts that are needed/suggested/recommended? What I have so far is... - Brand new bare magnum head - Magnum intake manifold with working butterflys/motor - Summit rpm window switch - Cold air intake with r...