Search found 2366 matches

by Arro
Sun Aug 17, 2014 4:01 pm
Forum: Drivetrain
Topic: CV axle has light rust on axle stub, what should I do?
Replies: 1
Views: 2749

CV axle has light rust on axle stub, what should I do?

I left a CV axle outside but under the patio cover, but it got a thin layer of rust on it. It's the topmost one in this picture: http://img.photobucket.com/albums/v216/arrospeed/Neon/20140817_122914.jpg Can if be reconditioned? Also the hub end: http://img.photobucket.com/albums/v216/arrospeed/Neon/...
by Arro
Sun Aug 17, 2014 3:25 pm
Forum: Drivetrain
Topic: '00 ATX-2-MTX: shift interlock cable? what is it?
Replies: 1
Views: 2598

'00 ATX-2-MTX: shift interlock cable? what is it?

I'm finally pulling my ATX to swap in the MTX on my '00. I removed the two cables from the shifter. I was wondering what to do with that second thin cable that was attached to the ATX shifter... Haynes manual calls it the shift interlock. Is that their fancy name for a park/neutral safety switch? Is...
by Arro
Sun Aug 17, 2014 3:15 pm
Forum: General 2nd Gen Discussion
Topic: i can smell fuel in the cab, fuel gauge also acts strange
Replies: 3
Views: 2051

So you don't think it's the pump? I already bought an MPx Wally 255 kit and 58 psi regulator. I figure might as well put it in. If the pump still doesn't work then I will have to check wiring. I'm in the process of also pulling out the ATX so there's no battery, but I will worry about the fuel once ...
by Arro
Sun Jul 27, 2014 9:08 pm
Forum: General 2nd Gen Discussion
Topic: i can smell fuel in the cab, fuel gauge also acts strange
Replies: 3
Views: 2051

i can smell fuel in the cab, fuel gauge also acts strange

Ok so we believe the fuel pump died. Key turned on, disconnected line at firewall in engine bay, no fuel. So we ordered the MPx Walbro kit and the Mopar 58 lb.regulator. Got the tank out thanks to the guide on here by quicksilver ... and we got to thinking...... when we filled the tank up, sometimes...
by Arro
Sat Jul 26, 2014 1:50 pm
Forum: Drivetrain
Topic: '00 MTX trans mount vs. SRT-4 trans mount
Replies: 7
Views: 5322

Yep Justin that's exactly what the case is with this one. It's a new mount though, doesn't look like it has ever been used, so for now I will put it in as is until I locate an OEM with decent condition rubber. HEY I also need an upper motor mount bolt, broke the one in the SRT and had to steal the o...
by Arro
Thu Jul 24, 2014 3:36 pm
Forum: Drivetrain
Topic: '00 MTX trans mount vs. SRT-4 trans mount
Replies: 7
Views: 5322

I'm tryin! LOL

I have to get a fuel pump in too, this bitch's pump just died :/

I gotta have it done s00000n, it's not desire now it's necessity.
by Arro
Thu Jul 24, 2014 2:57 pm
Forum: Drivetrain
Topic: '00 MTX trans mount vs. SRT-4 trans mount
Replies: 7
Views: 5322

Ahhh... I have a trans mount on this MTX I bought but when I bought the urethane mount inserts they won't fit... looking at pictures it seems I don't have a genuine Mopar mount so the holes in the rubber aren't where they are supposed to be for the insert to work. http://img.photobucket.com/albums/v...
by Arro
Wed Jul 23, 2014 5:04 pm
Forum: Drivetrain
Topic: '00 MTX trans mount vs. SRT-4 trans mount
Replies: 7
Views: 5322

'00 MTX trans mount vs. SRT-4 trans mount

Are the '00 MTX trans mounts the same or similar (swappable) with SRT-4 trans mounts?
by Arro
Sat Oct 12, 2013 12:19 am
Forum: Drivetrain
Topic: Is te Sebring V6 clutch an option for the SRT transmission?
Replies: 3
Views: 1999

So you're saying the Sebring V6 clutch is weaker than the OEM SRT clutch? See, I haven't replaced this clutch and I think my TOB needs to be replaced... and I think I need to replace a worn clutch fork... so.... see where I'm headed with this? Of course, if it's *weaker* than the stock SRT clutch, t...
by Arro
Fri Oct 11, 2013 11:35 pm
Forum: Drivetrain
Topic: Is te Sebring V6 clutch an option for the SRT transmission?
Replies: 3
Views: 1999

Is te Sebring V6 clutch an option for the SRT transmission?

I was just wondering.... do the 2GN and SRT use compatible clutches?

I have a Sebring V6 clutch, new with TOB.... can I use it?
by Arro
Fri Oct 11, 2013 11:21 pm
Forum: Drivetrain
Topic: 04 SRT Transmisson shifting issues !? HELP
Replies: 8
Views: 3854

Some of it is probably due to the transmission twisting back and forth under hard shifting, because it repositions the shifter cables. Solid mounts (or inserts) would eliminate a lot of that.... buuuuut... that worn shift fork issue also contributes to proper engagement of the clutch, so..... try mo...
by Arro
Fri Oct 11, 2013 10:44 pm
Forum: Picture Post
Topic: RaceLand COILOVERS YAY
Replies: 49
Views: 18386

Since when does an SRT ride higher? The wheels are larger, but the spring perch is higher... and the springs are shorter. If you put SRT factory springs on a normal 2GN they lower the car.


So.... how are the Racelands holding up? ANy leaks?
by Arro
Fri Oct 11, 2013 10:39 pm
Forum: Off-Topic
Topic: Happy birthday Arro!
Replies: 2
Views: 1105

I didn't think to check this.... thanks guys! ;)
by Arro
Fri Sep 13, 2013 2:42 pm
Forum: Picture Post
Topic: RaceLand COILOVERS YAY
Replies: 49
Views: 18386

or leaks..... any leaks?
by Arro
Tue Jul 30, 2013 9:58 pm
Forum: Audio / Security / Electrical
Topic: Aux iPod adapter for the RB1?
Replies: 9
Views: 4270

Yeah it works. You just set your mode on the stereo and it connects to the input. People use that on Chrysler radios all the time. When I finish my tablet-centered media setup it will supply audio through there. For now I have a minivan deck that looks like ours but has a CD AND a tape deck lol
by Arro
Tue Jul 30, 2013 8:09 pm
Forum: Progress/Project Log
Topic: BLACK 2001 R/T SRT SWAP AKA GRIM REAPER, new video and red 2
Replies: 37
Views: 10771

I wish I had seen this a couple months ago... I just finished a two-color powdercoat on my stock SRT-4 valve cover :/ So you have this big azz turbo on there.... and a big FMIC. And an intake mani, and probably a larger TB. Boomba rail. What else? What size injectors, which fuel pump? Do you have a ...
by Arro
Tue Jul 30, 2013 8:07 pm
Forum: Engine
Topic: Installing a header on a 2000 - *Interesting* bit of info!!
Replies: 19
Views: 6482

All the more reason why I should get off my ass and do my MTX swap and ditch the slushbox lol
by Arro
Tue Jul 30, 2013 5:31 pm
Forum: Progress/Project Log
Topic: BLACK 2001 R/T SRT SWAP AKA GRIM REAPER, new video and red 2
Replies: 37
Views: 10771

And the bolt pattern is the same? Interesting.
by Arro
Tue Jul 30, 2013 5:30 pm
Forum: Suspension, Steering & Brakes
Topic: Anyone use brake ducts similar to these?
Replies: 23
Views: 7886

Air scoops for brakes are nothing new actually, and the wind drag of these wont' be any worse than the two extra nostril vents on an SRT-4's front end. I think these are exactly what you need, I say do it!
by Arro
Tue Jul 30, 2013 4:54 pm
Forum: Picture Post
Topic: SRT-4: A little dress-up and a new digital tool/toy
Replies: 12
Views: 5762

Do you have that LM-1? They no longer make that anymore. All the time and trouble you would have trying to do that you could just get a bung welded on and use a wideband with better data. If you found a LM-1 to use they go for like $400. A decent wideband can be had for around $150. No not a full L...
by Arro
Tue Jul 30, 2013 11:52 am
Forum: Progress/Project Log
Topic: BLACK 2001 R/T SRT SWAP AKA GRIM REAPER, new video and red 2
Replies: 37
Views: 10771

Yeah I'm curious what the story is on the first (red) valve cover... Did you modify an SRT one or is that off of another vehicle?
by Arro
Tue Jul 30, 2013 11:31 am
Forum: Picture Post
Topic: SRT-4: A little dress-up and a new digital tool/toy
Replies: 12
Views: 5762

Still plan on it, using the Innovative link I provided.
by Arro
Mon Jul 29, 2013 9:57 pm
Forum: Picture Post
Topic: SRT-4: A little dress-up and a new digital tool/toy
Replies: 12
Views: 5762

Yeah I'm not sure where it will end up. Or if most of the time I might just rock my phone with it instead, and run mostly alerts with like two or three desired readouts. That's the thing tho... it's flexible. And... a tablet sized device can better use the HUD mode: http://www.youtube.com/watch?v=PI...
by Arro
Mon Jul 29, 2013 9:22 pm
Forum: Picture Post
Topic: SRT-4: A little dress-up and a new digital tool/toy
Replies: 12
Views: 5762

I would agree with you, except that I already had the tablet, the program is 5 bux, and the adapter was 12. There are way more readouts including a/f and knock and other things. This doesn't replace an InTune because it can't program. But it's a cheap and easy and fun way to keep tabs on things, it ...
by Arro
Mon Jul 29, 2013 5:47 pm
Forum: Picture Post
Topic: SRT-4: A little dress-up and a new digital tool/toy
Replies: 12
Views: 5762

SRT-4: A little dress-up and a new digital tool/toy

Since I bought my SRT-4 in Dec, I spent most of the year just... *driving* it. I was in school and on overload semester schedules so there wasn't much time other than to sort out a few of the little issues (power steering rack sensor, oil pressure switch, upper torque mount, missing shifter bushings...
by Arro
Mon Jul 29, 2013 5:07 pm
Forum: Picture Post
Topic: Tree vs. Neon... the tree won
Replies: 20
Views: 6288

Wow, this really does suck, your car was really nice looking. But at least you're ok, like everyone says that's what matters most!

I might want some things off of this car, too. Maybe the side skirts.
by Arro
Thu Jun 20, 2013 8:24 pm
Forum: Interior
Topic: Looking for opinions on my gauge plans
Replies: 11
Views: 3367

Bump due to college killing my free time until summer... Dante, the non-SRT pro-comps don't backlight, they reflect illuminate. Even the "factory" gauge doesn't light up like the cluster, althogh at least it has some through-lit numbers and the number font matches. If you look at the VDO silverstone...
by Arro
Sat Jun 01, 2013 3:31 am
Forum: Off-Topic
Topic: Visiting Las Vegas tomorrow
Replies: 4
Views: 1709

Visiting Las Vegas tomorrow

I'll be up in Las Vegas if any LV peeps want to get together... PM me phone numbers of whatever.
by Arro
Mon May 27, 2013 12:16 am
Forum: Off-Topic
Topic: Happy birthday INVUJerry!
Replies: 5
Views: 1702

Oh shittakes, that sux.... well maybe you guys can party afterwards :thumbup:
by Arro
Fri May 24, 2013 10:56 am
Forum: Cars For SALE
Topic: 2005 neon srt4, 0 miles.. SOLD!!!!
Replies: 39
Views: 10888

It wouldn't pass because of the VIN. Most states would have trouble allowing that. In some states, there are looser grey market importing laws and they create a VIN for the car... that is what was done with my Japanese imported Silvia. But this isn't an imported car. They would require it to meet 20...

Go to advanced search