2GN.ORG

The bumper isn't mounted all the way, I didn't put the foam absorber in, only one nut is holding each side to the body, the push ins for the bottom aren't in which is why it's sits like that. I had to get it moveable again to get it out of the garage so I Neuf threw it all together.

Well. I have been so busy fixing everyone else cars that I have been neglecting my own. Srt is sitting just under 70k miles and clutch and timing belt need to be done soon. and orange here gets like a panel done a month now, well at least its progress and I don't need to drive either of them anymore...

Salsa red pe5 finial getting somewhere.... http://img199.imageshack.us/img199/5571/5ag1.jpg http://img268.imageshack.us/img268/8374/2nl8.jpg Been getting the car done in sections. Still have to paint the: Roof Decklid with molded kia optima lip spoiler mopar skirts drivers rear door drivers quarter ...

Sorry, guys have been really busy lately, Ill be back on this soon...

srtgtr34, do you have to keep greasing the ball joins in those moog problem solver control arms like every oil change? that's seems too often... You shouldn't have to grease them every oil change, I would at least once a year. they are lowering their standards a bit to compete with dorman part pric...

Moog R series is their new line of control arms, they are more economically minded. The problem solver line is better but is being fased out, once they are gone they are gone. I find dorman parts to be ok, i would only get them, if they were the only ones getting made. I currently have 2 problem sol...

10 months later.. I still really havn't made progress on the car. Lets see what has happened.. money got tight for a bit, and instead of fixing the car cosmetically I ended up replacing Alot of steering and suspension parts. 2 new moog lower control arms 4 moog strut mounts moog inner and outer tie ...

To stop my leaking sunroof, I took the whole thing out and cleaned it up. Removed the six screws holding the glass to the car, took the rubber weatherstriping off of the glass. I then grinded most of the rust off the lip where the weatherstripping mounts, masked off the glass, sprayed it with epoxy ...

I really don't have the extra cash for any mods in it for now. I have to finish the other car soon. http://img443.imageshack.us/img443/1285/20111006182847168.jpg http://img708.imageshack.us/img708/7483/20111006182857328.jpg It only has 1 coat of liquid glass on it so far but it is super smooth and s...

Things I would like to change soon. The tail lights are too dark, I want to strip them back to stock again or make them black cherry. Home depot lip is coming... Major cleaning... Just got done clay baring, compounding and liquid glassing the car. Supposedly the dealership did a 300 dollar detail on...

http://img847.imageshack.us/img847/7206/20111004190445333.jpg http://img585.imageshack.us/img585/2860/20111004190625187.jpg http://img585.imageshack.us/img585/5474/20111004190654717.jpg http://img24.imageshack.us/img24/8784/20111004190712179.jpg http://img502.imageshack.us/img502/8134/2011100419072...

Its an 05. 47k miles and the only mod when i got it was an aem cai.

I'll get more pics later.

looks like I have two projects.....

Feedback For: abarguy
You in the transaction: Seller
Feedback Rating: +1
Comments on the transaction: Fast payment and great communication, thanks again..

Feedback For: prez3636
You in the transaction(seller or buyer): seller
Feedback Rating: +1
Comments on the transaction:Great Person to deal with.

I would say fuel pump.


check to see if you can locate excatly what part of the car its coming from.

Check your grounds behind the drivers side tail light.

I had the same issue the other day, except it dropped with the defroster being on.

Except, I'm almost positive he fiberglassed the whole area, I cut and rewelded 2 areas there and finished it with flexible polyester filler. My bumper is a bit more forgivable than his.

Alot more plastic work has been done since I last updated this. I pretty much have the putty work done on the passenger side of the car, I really just have to put the final glaze over it. The drivers side isn't as far along but it should be pretty close to being done tomorrow. I'm shooting for havin...

Sxteve wrote:Pretty cool evolution. Nice to know i'm not the only one that had this idea! lol! The lip kit makes it!

If your interested in the front lip, I can get it to ya for $50 bucks. Its brand new with everything, and we can meet up since your not too far.

Its painted px8 black though...

Did some more good stuff today. http://img69.imageshack.us/img69/8328/img20110309145812.jpg http://img715.imageshack.us/img715/3061/img20110309145818.jpg What we did this past week. Cut the vibrant muffler up, to fit the mopar rear lip. Almost 4in were cut out of each side in order to get it where i...

Nice. I was going to suggest cutting plastic from another bumper for the fillers since the piece you could out would be too small for the hole because of the angle on it. But I see you figured that out :lol: Actually re-using the plastic that was cut out is the harder way. I was plastic welding for...

Today, I got the old bumper off, and put the new one on to see how much modifying will have to be done. And, its alot. The exhaust is off by about 3.5in on each side and they are too low. Hopefully tomorrow we'll have the exhaust cut up and tacked so that its aligned correctly. Should be fun. Also b...

Dam this kind of puts me down..

IMO it doesn't look as good as the newer 03 bumper with the lip..

Depressing....

Yes it is oem.

Manufactured march 02, didn't even have the x's on it for the lip kit.

Also has the vin sticker on it, I know for a fact that its oem.

Alright so before I really didn't notice much of a difference since I really never looked at 03+ bumpers. So I installed my rear mopar lip today and found this: My rear bumper doesn't have as tall ao boobies and a license plate cubby as all the other ones that I have seen. My license plate cubby for...

Got my lip today: http://img192.imageshack.us/img192/556/img20110302164036.jpg Also did some work on the rear bumper. I pretty much did as much as I can do right now. I ordered some flexible filler so that I can finish it up. I will be mounting the lip tomorrow and trimming the bumper up and test fi...

Still alot of work left:



The lip kit comes in tomorrow..

P.s. If any one else tries to do this, don't use the piece that you cut out, just cut a peice of TEO plastic from another bumper and weld it on.

I did some new led work today... http://img713.imageshack.us/img713/2971/img18291.jpg http://img842.imageshack.us/img842/1421/img18311.jpg http://img156.imageshack.us/img156/831/img18261.jpg http://img856.imageshack.us/img856/8743/img18481.jpg http://img194.imageshack.us/img194/9891/img18471.jpg My ...

Yeah, thats the one..

Depending if the girls at the counter a generour to you with all the parts: $150-240
And about 7 hours just pulling everything from the donor car...