2GN.ORG

Well now I can check one more thing off the never ending list..... I tore the car apart last Friday night and started to prep out the hood and front bumper. I also touched up the crash par and rad support ( I dont have the foam to sit between bumper and crash bar) http://img.photobucket.com/albums/v...

Pulled the front bumper and hood off tonight. Stripping off the vinyl wrap on the hood and prepping both out. Spraying both on Sunday. Cant wait for my car to be 1 color again :rockon: Also got the wheels all painted and hung on the car. The wheels had 2 burnt off tires and 2 nearly new GT Radial Ch...

Good detective work. The R/T bumper mentioned with the lip was the rear bumper. Front bumper was the extreme dimensions one. The R/T rear will be going back on the car in spring. The SRT exhaust will be narrowed to fit just like I had back in the day before I swapped back to an RT exhaust and sold t...

There's no yellow front bumper, let alone 2. I've explained why.

Well not much happening lately. The owner of a local body shop is going to let me spray some parts in the next few months. I'll wait until closer to spring but the plan right now is to just spray the front bumper. I'm going to reinstall the stock rear with Mopar lip in spring and narrow the exhaust ...

used a combination of both. Took about an hour and a half to do . I did a clay bar on it before hand. I started at the scoop as that was where most of the stretching of the product was going to be. Had to use some heat to stretch it around a few areas but all in all it wasnt too bad. Looks good when...

Not really alot to update with over the last few months. Summer wheels/tires are off and sold. Got my boost gauge installed finally. http://img.photobucket.com/albums/v247/03sxrt/Mobile%20Uploads/IMG_20141116_082725.jpg Also vinyl wrapped my hood. 3M Satin Black. Turned out good for first try. Ill w...

Got my fans figured out. Had a bad relay and bad connection at connector. Works like a charm now. Just need to get some resistors to take the CEL off for the solenoid delete. Took the car for about a 300 km drive this weekend and it didn't skip a beat! I'm very happy with how it's turned out at this...

Well folks, the swap is DONE! A few things to take care of yet. My radiator fans don't seem to be kicking on so I'm going to probably hard wire them in. Still need to deal with the solenoid delete as that part of the harness was cut out and not available. Also need to get some gauges but that will c...

He said on Facebook last night he's had the SRT pedals in the car for years... so I guess that isn't it. I updated a few hours later. I feel like the biggest ass. Years back I swapped pedals, atleast the gas pedal. The clutch and brake I trimmed so that the srt pedal pads would fit on. I forgot all...

Time for another update... Put everything back together after the last post. Same issue. Realized in my infinite wisdom that I fired up the car a few times with the slave removed. It was liking fluid so I put a new one in. It was better, but still not working enough. Pulled the trans a second time t...

So Ive somewhat finished my swap from an '05 SRT-4 to my '03 R/T. It runs great but the problem that I am having now is that the clutch isnt working enough to let the vehicle roll when in gear. So far I have removed the trans and replaced the throw out, fork and pivot ball. Removed the trans again t...

Guess it's about time I give an update. Last weekend I tore into everything. Motor was out of the yellow car. Pulled the motor and trans out of the orange car as well as harnesses and everything else for the swap. Got everything moved over to the new motor and bolted up the T850 and dropped the car ...

Took a good look at the t350. Not sure how long ago but it had been replaced with a used one. Looks like the clutch was replaced at the time too. Throw out bearing fits really loose on trans input shaft. When I drained the fluid it looked a bit milky/shiny. Also the drivers side CV was toast. Becaus...

damn that thing looks sexy lowered! what are you doin with the old motor? Boat anchor :D Im not sure really. Ill put it all on a pallet later and let it sit for now. Needs a head gasket. I was going to use the trans for the swap but I dont think its in my best interest after looking at the fluid th...

Little update I've mocked up the new motor a bit. Changed water pump and timing belt. http://img.photobucket.com/albums/v247/03sxrt/Mobile%20Uploads/20140810_202243.jpg Swapped out the struts and lowering springs from the donor car Before http://img.photobucket.com/albums/v247/03sxrt/Mobile%20Upload...

Motor showed up today! http://img.photobucket.com/albums/v247/03sxrt/Mobile%20Uploads/20140808_195108.jpg Waiting for some more parts that havent shown up yet. Probably won't touch the motor any more for the next week or so. Starting to clean up some of the parts I'm reusing. Took care of the intake...

Tonight's mini project.

nice wheels :P. That car will be really nice with a turbo. The combo of the 350 and the turbo setup means that car is going to be freakin quick. The srt gears are supper long in comparison. Thank you! It should be fun with the t350. The stock trans was replaced with a used unit about a year or so a...

Thought I should give this an update. The day after I got the orange car I programed a key and went to fire it. Nothing but 1 large clunk. To make a long story short, engine is fucked. So I contacted the people I got the car from and as of today I have a used long block from a 05 PT Cruiser turbo on...

The car now has an extreme dimensions body kit from bumper on it. The people that I sold it too, and bought it back from, had damaged the front end and put a different bumper on. I figure if im doing the front, ill match it with the rear. Ill probably sell the passenger side doors, truck and passeng...

powertrain, front & rear bumpers, hood, right tail light, door panels, suspension & brakes are all getting swapped over. Not much will be left of it by the time im done.

Well its been a while since I made any updates but there hasn't been much to say, up until the last few days. What started out as a quick email looking for a few parts from a wrecker turned into bidding on a wrecked 2005 SRT-4, and picking it up last night. Time to get busy! http://img.photobucket.c...

Well I got it back together tonight. New plugs and wires and valve cover on. Seems to run better. No misfire codes but I think it still has a slight one. It's like it gets a little fart every second or two up to about 2000 ram then goes away. I didn't get to drive it very far and won't be able to fo...

Started playing with the car a bit. Changing plugs and wires. Figured I would tidy up the valve cover at the same time. This is the first time ive played with something like this. Decent for a rattle can job. Next motor ill powder coat it I think. http://img.photobucket.com/albums/v247/03sxrt/IMG_20...

Well I finally picked up the car on Sunday. The 3.5 hour drive took nearly 6 as the car was running a bit funny and over heating. I dont remember ever flushing the cooling system in the car when I owned it, and I dont believe they had either. There was a nasty mix of factory long life, green and I t...

Starting to get excited! Picking it up on Sunday! Its going to take a little while before I start digging in to the car too much. I wasn't expecting to buy a car, let alone this one! Short term though there are a few things I plan to do... like remove the 35% tint from the rear doors and back glass ...

Back from the dead.... Sitting around the house last night playing on KIJIJI on my phone and came across an ad in a town 4 hours away for my old car. Needless to say Ive thought about what I would do if I seen that it was up for sale again. This morning we came to an agreement on price, looks like i...

Feels like its been ages since I have been on here, but I guess in all reality it has. Ended up selling the car to the people that were interested in it in my last post. Went to a 16 girl the next town over. I ended up leaving my job with ford and worked in that same town and would see the car from ...

Hammering out a deal with someone right now. Looks like it might be sold, as long as they meet me on my price which is only a few hundred over what they have offered. A few minor issues will have to be taken care of by me on the car but I will be getting more that what most would think. Hard to see ...