2GN.ORG

If the fans are working as they should then it's maybe your water pump is just weak and not flowing enough.



Sent from my VS995 using Tapatalk

Here they are. Best picture I have so far. I installed them during my lunch break yesterday at work. These depo Diamonds look/feel of much better build quality than the projectors. Already in love with them. Even without adjusting them, they are already better at night then the projectors ever were....

Thanks guys. Appreciate the comments. Haven't had time to install them. Tho I did have time to remove my old black plastidip off my front bumper lip. I'm never using dip again. So terrible to take off. Plus I ruined the paint underneath it to the point I'm going to repaint the lip itself. Now I know...

And I'm back with 1 brand new part. So I've been searching for some stock headlights on ebay recently. Thought I would just buy me a set of bone stock ones because I hate my current Depo projectors. Well to my surprise I came upon a listing for Depo diamonds which have been discontinued for some tim...

I recently did this. I had my hotside pipe 90 off the turbo over and next fit the cam gears and back down to the intercooler. Well in my attempt to clean up the engine bay I decided to run it under the engine like srt4 style. So I removed both the back engine to trans brace and the oil pan to trans ...

Only 18k miles. Wow. Super clean.

Sent from my VS995 using Tapatalk

Wow. Now there's something you don't see everyday. It's crazy to think someone deleted the rear brakes [emoji23].

Sent from my VS995 using Tapatalk

I agree on taking the black off too on the front fascia Yeah the worse part is breaking in a new clutch. 500 STOP AND GO MILES. Remember that. I would log the miles when I would go into town. Interstate/highway miles didn't count. Seems to take forever haha That's a good idea about tracking the mil...

Down to the last 30 days guys. [emoji41]

Sent from my VS995 using Tapatalk

[emoji23]🤣 Alright. The black on the bumper was something I did like 2 years ago just to see how It would look. Something I always wanted to try just like the front bumper cutout with new intercooler. But yes it's going to come off possibly as soon as tomorrow. May have some time on my hands before ...

I think it would look a lot better without the black on the lip. I'd leave the black on the bumper itself, but keep the lip red. The new intercooler looks nice. Finally someone said something about that. I've been debating removing the black. It's just old plastidip. I'm sure I could remove it easy...

Thanks Tom. I drove the car on its first voyage to work today. She did great. No issues. I love this new clutch plus this 3.55 trans feels great compared to my old 3.94 setup. I didn't even have to go into 5th gear on my way to work. Now time to do the 500miles break in for the new clutch. So I'm go...

We are almost a month away from Carlisle trip time. Woooot.

Sent from my VS995 using Tapatalk

And I figured the issue out. The new battery ground I had in the trunk was in a bad spot. Moved it over to where the original cable was grounded too and all is good. Got the car to start. Everything's great. Runs smooth. Idles fine. No leaks. Good to go. After I have a chance to wash her up I'll sna...

Check your grounds... I the only ground that I can think of being maybe bad would be the one on the lower starter bolt which goes to negative cable. Maybe me painting the trans made it useless. But I didn't get paint or anything in the side the ground is on. Either way I haven't tested that ground ...

^hahahaha So now I have an issue with the neon. So I filled the gas tank up, went to connect the positive cable on the battery and open the drivers door to put key in and prime the line and as soon as I opened the door the boost gauge and afr gauge lit up. I'm like why in the world did that light up...

So that's what a 7 grand tach cluster looks like. All the one's I have seen went to 8. One can only assume the SOHC cars got the 7's and the DOHC's got the 8's. Hmmm, I also noticed the cluster has stops at just over 7 thousand, and 120 mph. I'll have to look later to see if my cluster has those. Y...

Back to a stock gauge cluster ftw as well.

Sent from my VS995 using Tapatalk

And finally. Another thing done that I've wanted for a long time. A regular neon center console instead of my acr one which had no arm rest, extra storage space or 3rd cup holder.

Sent from my VS995 using Tapatalk

Thanks, man. I've seen so many rippled fenders from half-assed rolling jobs, that I was nervous to be aggressive with it. But it turned out pretty nice, actually. I guess that's the benefit of using the proper tools. Proper tools is always a must. Back in my 2gn days I was stupid and used some vice...

Looks a lot cleaner under the hood. You should throw some gold heat shielding on the firewall to match the trans paint. I thought about adding the gold heat shielding. That or having my valve cover powder coated gold. The Red on the valve cover has seen better days. It's powdercoated but a really o...

I remember having to roll fenders. Makes such a huge difference in the not rubbing part.

Nice job. It looks good.

Sent from my VS995 using Tapatalk

Anyone out there. Hello. Haha. More updates. Almost ready to start. Have to find time to put the final touches on. Heres the engine bay almost done. Looks a hell of alot better with the hotside pipe underneath the engine. And there's the final fitment of the new intercooler. I love it. Can't wait to...

Yes I know. I'm hoping to be there. Trying to get the last little bit done on the neon. Then I'm daily driving it as much as I can until Carlisle so I know everything works and runs good. I'm behind on having it done. I was hoping to have it done already but it's not. Not much left to do. Just a han...

I was lost the first time I took it apart a few years ago. But when you do it over a couple times it's easy. This will be my 4th time having everything apart. Hopefully the last time for a good while. Oh wow, look at all of the "spaghetti" under the hood. Glad that you know what goes where... I'd be...

Well finally getting somewhere. Major stuff is done. Now for all the little things.



Sent from my VS995 using Tapatalk

Bump.

Can't wait to see everyone there this year.


Sent from my VS995 using Tapatalk

I did not know that. I did butcher that up. Haha. It's gets so confusing sometimes with interchangeable parts. Thanks for clarifying that up.

Sent from my VS995 using Tapatalk

Finally completed a much needed upgrade. And that is going from the 95-96 style metal gas tank 11.5 Gal to the 2gn plastic 12.5 gallon. https://uploads.tapatalk-cdn.com/20180516/9bb294d478a0e22d521b72a3447e4f16.jpg https://uploads.tapatalk-cdn.com/20180516/96fbed90dc0521ccb1b3c51e6a2d9b99.jpg Sent f...

Unless you can get some hardener and mix it with the clear, It likely won't hold up more than 3 to 5 years if you're lucky. Rattle can clear and even moderate heat just don't get along too well, unless you can get the stuff with hardener mixed in the can. I would at least get some hadener from TSC,...