2GN.ORG

Totally understand, I just tried to use the search function and got the same error as black rose, I tried searching for "hood shock" dunno if it helps, but yea lol

Geez Jason way to make me panic, first the site goes down, then it hard resets to 2015, then the site went down for like 3-4days, I thought it was gone forever...... but yea I realised the other day when I got a bug up my ass to dust off the old second gen and bro g her back from the dead that i mig...

well its easier to get the entire brake/clutch pedal setup out of a late '00 hyd setup, because if you haven't noticed, the clutch pedal and brake pedal brackets aren't seperate, other wise you will be cutting and welding the eclipse one up, also a word of caution the eclipse clutch pedal arm ( the ...

modifying the fire wall isn't that hard i swapped over all the eclipse goodies, aluminium clutch master, cast slave and bent some steel line to mate up added a rebuild to both the clutch master and slave, new flex hose, and a non modular clutch from a '95 neon, pedals from an '01, new pt axles all i...

larger clutch selection once I build the turbo motor, and non-mod clutches are half the price to replace vs modular

good to hear guys, especially Chip, I was just worried God forbid something happen to the car and it leaves my wife and son stranded while I am deployed for 6+ months and she has to take it to a shop to fix it


-Mike

yea I know, i remember reading somewhere that someone left it in to help support the clutch, since there is pilot shaft on the end of the input shaft, stupid new venture gear, who designs a tranny with no pilot shaft on the tip of the tranny lol, I was hoping for more of a support bushing outta bron...

Hi all, I have a 2000 neon with a 2002 nvt-350 hyd trans, with '98 eclipse steel slave, and aluminium master, and I finally found a '95 non-mod clutch, drove it for awhile, then it started slipping so i replaced it, now its hit or miss but i sometimes get chatter, flywheel was resurfaced when clutch...

wish you were closer dude, got 6-7 rams in my local pick and pull, 2wd and 4wd, plus a butt ton of vans with 318/360's, good people and good warranty, best of luck with the tranny,


-Mike

I would just build one, I mean look how awesome the front bumper came our lol !!!!

-Mike

holy crap dude lol well you have a pretty sweet "battering ram" lol


-Mike

sick looking truck bro, what gage steel did you use for that bumper ??


-Mike

I have been wanting to buy a set of coilovers for awhile, and since my rear struts finally gave out, and i just got my tax return, I am pretty settled on the Ksport Kontrol pro series, but I see there are a set for the 00-05 neon p/n CDG02-KP, and a set for the srt p/n CDG030-KP. they both have the ...

you could always replace them with a aluminium clutch master and cast steel slave cylinder from a 95-99 Mitsubishi Eclipse with nice metal line and a rubber flex line from the same 95-99 eclipse and you have a badass and cheap upgrade with metal everything

-Mike

looks ok, dunno about the flared up turned top lip on the bumper, like an open fish mouth, I think its a waste of a SRT-D bumper, hell there hard enough to find as is, should have started with a SRT-4 bumper,


-Mike

Feedback For: XxWhiteNeonxX You in the transaction(seller or buyer): Buyer Feedback Rating: +1 Comments on the transaction: Great communication, VERY fast shipping!! Clutch was just as described, can't wait to put it in, Hope to do business with Cody again... Thank you very much !! -Mike

Recieved my clutch from Cody aka XxWhiteNeonxX today, the clutch got here soooo fast, is in great shape, will be putting it in later, +1 to a great seller, execellent communication, and blazing fast shipping !!!!

well i am used to working with cast iron mopar's, sorry i didn't use the correct termanology, he said it was pressure tested with a uv dye to see if there were any cracks in the head, there weren't. Its a reputable shop dover cylinder head, i am heard nothing but good stuff thats why i went there. -...

well i switched back to the old 16lb radiator cap, and so far doesn't seem to have any issues. I have a spare filler neck, i measured the inside depth where the rad cap seats, and the one i have is shorter than the spare, yea a radiator leak tester is probably the only tool I don't own lol. I know t...

well recently the water pump shit the bed on my 420A swapped 2000 Neon, over heated and blew the head gasket, and warped the head, $230 later I have the head back from the machine shop, reinstalled on car, torqued to spec. Now before it blew the head gasket it would build up insane pressure in the c...

just use the NV-t350 and be happy

-Mike

im running a cat delete, with srt mid and rear section, at idle its great and at certain point in the rpm band its amazing, the rest it sounds like a pissed off chain saw lol

-Mike

of the 3 wires on the neutral safety switch for the ATX, you hook the green w/ black stripe one up to the clutch interlock switch, the purple and white hook to the purple and white wires on the plug that goes to the sensor on the trans

sure thing Jerry, got about $5K to help me on my way lol, and no long header, weld el turbo manifold, HOLSET....... big boost but I need a spare motor to build with forged internals, and a nice list of expensive parts...... my wife just had our son, and i hear you get around $3K just for having the ...

thanks bro

also if you looking to do this and want to be creative, get a mitsubishi 420A DOHC engine, they are more readly available (atleast in my area/pick and pull) the only kink is the exhaust is a very tight fit, and has to have some custom tight bend to make work cause the mitsu 420A is a REVERSE FLOW he...

Thanks guys, its defintely been a steep learning curve, but its cake now lol I can take a stock jeep 4.0L TB mod it and bore it in like 1.5 hours vs the 4 hours it took first go. Oh i didn't take pics but shes dropped on a set of Eibach pro springs, my cost at the junk yard $40 for all 4, new MSRP $...

heres the location for the clutch interlock wire...... http://i19.photobucket.com/albums/b162/Guardians91240SX/NEON%20OF%20DOOM/6062993908_fd53be069d_z.jpg the wires coming off the neutral safety meeting with the wires you need to splice to do 2 things, 1 (green wire, also there is a black wire, jus...

this is my build log prepare for epicness, she is a 2000 Plymouth Neon, came from the factory with a SOHC and ATX, well now shes 420A (out of a '98 Eclipse at 78K miles) powered, 5spd MTX out of a 2002 Neon, cat delete and 2.25" exhaust w/ SRT-4 cat back, new eclipse radiator, and besides the revers...

starsky and hutch is legit, and if it wasn't for the pizza slicer wheels the ddrop top is sickkkkkk, I am gonna look for a rolling shell now I feel inspired lol