Search found 95 matches

by Kezzo123
Wed Apr 17, 2013 3:56 pm
Forum: PN Chassis
Topic: Part Number Request: Rear disc brake hoses
Replies: 4
Views: 838

Much appreciated!

Ill go check it out!

:thumbup: :D
by Kezzo123
Wed Apr 17, 2013 9:35 am
Forum: PN Chassis
Topic: Part Number Request: Rear disc brake hoses
Replies: 4
Views: 838

Part Number Request: Rear disc brake hoses

First off thanks in advance!

I need the Chrysler OEM part numbers for the rear brake hoses, left and right - The ones that attach to the brake caliper with a banjo fitting.

My car is Chrysler Neon R/T 2002 with ABS (disks all round)

I've been pulling my hair our with this one!!

Thanks :rockon:
by Kezzo123
Mon Jul 23, 2012 8:55 am
Forum: HT Drivetrain
Topic: How To: Daniel's PT Clutch Swap 03 Neon R/T
Replies: 32
Views: 8598

Hey all,

For all you British guys I just installed a PT Cruiser 2.4lt clutch:
http://www.gsfcarparts.com/parts/transm ... clutch-kit

Clutch is mega!

Pedal is ever so slightly harder but so marginal you don't notice.

Thumbs up to this ! Sticky helped massively :rockon:
by Kezzo123
Wed May 23, 2012 8:33 am
Forum: Naturally Aspirated
Topic: 2001 R/T ... More Power ??
Replies: 64
Views: 8132

Hello fellow brit!

Ive done the lot apart from LTH and turbo (obv) - My 2cents are, dont bother its not worth the agro for the gain. Fair enough I can keep up with my mate in his Civic type R but was it worth it??

No.

Turbo or no-go - Anything else is disapointing
by Kezzo123
Sun Feb 26, 2012 6:01 pm
Forum: Tuning / MegaSquirt
Topic: Volo Performance "Chip" VP12
Replies: 15
Views: 6139

Thought that would be the response! Thanks for verifying my perception of this forums demographic!

The fact of the matter is nobody on this forum has actually tried this, I will be the test bed. If it was a waste of money I will let you all know!!
by Kezzo123
Sun Feb 26, 2012 6:30 am
Forum: Tuning / MegaSquirt
Topic: Volo Performance "Chip" VP12
Replies: 15
Views: 6139

Volo Performance "Chip" VP12

Hi all, For quite a while now ive wanted plug and play ecu tuning. I know im going to get railed for this but im purchasing the Volo Performance VP12 Chip. When I recieve and install I will report my findings. Unfortunatley for some of you I will not be dyno proving this as one dyno run in this coun...
by Kezzo123
Tue Jan 31, 2012 5:43 pm
Forum: Naturally Aspirated
Topic: Moving idle 1700rpm :S
Replies: 15
Views: 1400

Well its definaltly the throttle sticking open a little. Ill be taking it off when it warms up a bit, -5c currently (23F), and ill do some more hand filing, sanding till its nearly shut. As for the oil change its made a huge difference car stops ticking within 10mins of tick over / 5 mins driving in...
by Kezzo123
Thu Jan 26, 2012 8:28 am
Forum: Naturally Aspirated
Topic: Moving idle 1700rpm :S
Replies: 15
Views: 1400

Cars very recently had a full rebuild (6500miles ago), brand new pistons dohc Hypereutectic pistons and rings mild port and polish 10thou deck comp400 cam blah blah blah....

I sounds more top end then piston slap. Ill update on what happens with the noise also! hahaha
by Kezzo123
Thu Jan 26, 2012 2:57 am
Forum: Naturally Aspirated
Topic: Moving idle 1700rpm :S
Replies: 15
Views: 1400

4th Day of driving to work and now moving idle is 1400rpm falling down to 1100rpm quite alot but randomly.. Im guessing that the car is learning. Going to leave it as is for a week and report back if anything changes. On another note going to swap out the oil and filter this weekend some 5w30 fully ...
by Kezzo123
Mon Jan 23, 2012 2:58 am
Forum: Naturally Aspirated
Topic: Moving idle 1700rpm :S
Replies: 15
Views: 1400

Well Ive just drove to work, no changes made since before. Moving tick over is a bit wierd 1550rpm seems to be norm, however sometime falling to 1200rpm.

Does this mean its learning OR its sticking sometimes?

:S

Confused.com......... Give me a carb anyday!!!
by Kezzo123
Sun Jan 22, 2012 2:00 pm
Forum: Naturally Aspirated
Topic: Moving idle 1700rpm :S
Replies: 15
Views: 1400

Quick update, not had to much time to play on this today as I had to take a drive to pick up some seat runners for the bug. Did manage to get the TB idle screw lower without it sticking, same idle 900rpm ish but now moving idle is 1600rpm so some progress! Thinking it must be a vacuum leak the stock...
by Kezzo123
Sat Jan 21, 2012 3:26 pm
Forum: Naturally Aspirated
Topic: Moving idle 1700rpm :S
Replies: 15
Views: 1400

Ill give that a try, I will also try and get the static idle down some more from 900rpm to 750/800rpm (stock tb idle), by filing the butterfly to match the TB to see if that helps anything. Ill report back tomorrow! Just checking but I put the TPS sensor on by rotating clockwise. Its not the other w...
by Kezzo123
Sat Jan 21, 2012 2:28 pm
Forum: Naturally Aspirated
Topic: Moving idle 1700rpm :S
Replies: 15
Views: 1400

Thanks for the response, I am as low as I dare before sticking. I even chamfered the inner edges of the butterfly so it would shut more! The TPS went on a little strange both times, it went on easy but I had to turn it through about 10 degrees for the bolts to go in.. But I had to do that with the s...
by Kezzo123
Sat Jan 21, 2012 11:09 am
Forum: Naturally Aspirated
Topic: Moving idle 1700rpm :S
Replies: 15
Views: 1400

Moving idle 1700rpm :S

Hey all, Just installed my 60mm Lorenzo TB and have a wierd issue. When stationary isle is around 900rpm but when Im moving, for no reason revs straight up to 1700rpm :S I swapped back to the stock TB and its perfect, same sensors, couplers....... The ONLY variable is the TB. I cleaned the IAC befor...
by Kezzo123
Thu Dec 01, 2011 7:56 am
Forum: Naturally Aspirated
Topic: Who has a 60mm TB?
Replies: 21
Views: 1902

Ive got dohc bottom end, mag head decked 10thou ported and polished, Comp400 cam and a mag exhaust header. Mag inlet manifold has been port matched to head and inlet to the manifold has been opened up.

Ive just purchased an LFS 60mm TB and Ill report back when I recieve it and fit it!
by Kezzo123
Sat Aug 20, 2011 5:46 am
Forum: Progress/Project Log
Topic: r/tguy02: Magnum n2o (shit luck...)
Replies: 86
Views: 9732

Nice work so far. Ive got pretty much the same setup, comp400 cam dohc pistons, lightly ported mag head decked only 10thou, puts me at bout 10.4:1 ish i think. Stock ecu (pcm) took 2000 miles to do anything tho was propper bummed out till then now I can annoy civic type R's! I shaved my pistons abou...
by Kezzo123
Sat Jul 30, 2011 7:01 pm
Forum: HT Engine
Topic: How To: Serp belt tensioner pulley replacement
Replies: 25
Views: 16689

Just for the record this doesnt work on RHD neons. Tried it last weekend and the motor cant go high enough due to the master cylinder. Had to send the car into the garage where they pulled the axels and moved the engine and trans over to get to it. Oh and you cant get the pulley in the UK so I had t...
by Kezzo123
Tue Jul 26, 2011 8:25 am
Forum: Engine
Topic: eBay Backbox
Replies: 12
Views: 966

Hey dude, I bought the Magnaflow cat back system for my neon R/T... It doesnt fit UK cars at all! Had to get an exhaust shop chop it alot to make it fit. Was worth it for the sound but not the £600 it ended up costing in total. Since then I have aquired a tig welder and any exhaust jobs I need will ...
by Kezzo123
Thu Jul 14, 2011 8:32 am
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

I know have my adapters!! Ive decided to drill the headlights in a couple of places and run 12v LED's for the sidelights. ATM this isnt a priority as we have just recieved the block back from the machine shop for the dragster and Ill be working flat out on that + my cage for the beetle. Ill let you ...
by Kezzo123
Sat Jun 25, 2011 10:10 am
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

Jenni wrote:sounds stupid
yup
by Kezzo123
Fri Jun 24, 2011 3:27 pm
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

I see what your getting at, in all honesty if it passes MOT (inspection) im am not bothered. Nearly every street I have ever driven on in the UK has street lamps and where theres not, its main beam teritory...
by Kezzo123
Fri Jun 24, 2011 3:13 pm
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

Theres alot of adjustment with the adjusters so I dont think that will be too much of an issue
by Kezzo123
Fri Jun 24, 2011 11:02 am
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

a little update, I have ordered the 9004 -> H4 adapters
by Kezzo123
Mon Jun 20, 2011 12:28 pm
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

By law I don't think I can have orange side lights..... ill check this though. I'll try and source the adapters in the UK and see what I can do.
by Kezzo123
Mon Jun 20, 2011 10:27 am
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

Ok this would be my last resort!! I didnt really buy new headlights to butcher my old ones. Ill buy some 9004 to H4 adapters and get some tail-light bulbs and wire them into the fog's for side lights and some kind of fogs (however dimmer) So far this is my best shot? Any think this is a stupid idea?
by Kezzo123
Mon Jun 20, 2011 8:21 am
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

Thanks for all the replies. First off I dont have halo's they are Depo's / racoons It looks like I have the H4 harness but the H4 bulbs I have out of the OEM setup wont go into the depo housings. The bulbs that came with them are longer in size and have a rubber O-ring, they slide in and lock with a...
by Kezzo123
Sun Jun 19, 2011 5:20 pm
Forum: Exterior
Topic: So im from the UK and I bought depo's.....
Replies: 21
Views: 1417

So im from the UK and I bought depo's.....

Well I bought the Depo head lights from modern and when they came I was shocked at how different they are to my OEM ones. First: No side lights insert holes at all (could be called driving lights, basically forward facing 4watt lights that go in the main housing) And second: Completely different wir...
by Kezzo123
Tue Mar 22, 2011 2:31 pm
Forum: Forced Induction
Topic: Magnum Gt3076r Turbo! Need help from pro's!
Replies: 22
Views: 1520

loving theres another dude from the UK!

What cam you planning on running?

:rockon:
by Kezzo123
Sat Mar 19, 2011 2:18 pm
Forum: Progress/Project Log
Topic: Kezzo123's UK neon progression! and about time too!
Replies: 25
Views: 2350

Sneaky peek!

Image

Image

Many a progress has been done! updates will follow!
by Kezzo123
Thu Mar 03, 2011 5:45 pm
Forum: Progress/Project Log
Topic: Kezzo123's UK neon progression! and about time too!
Replies: 25
Views: 2350

Wo0o0o0o PARTS (gasket set, head bolts piston rings): http://img84.imageshack.us/img84/6673/imag0162ka.jpg Got some porting done on the inlets today used the gasket as the template: http://img28.imageshack.us/img28/4455/imag0165pf.jpg http://img607.imageshack.us/img607/1619/imag0166l.jpg Did the sam...

Go to advanced search