2GN.ORG

I was looking at doing that tomorrow, as far as bleeding it again. I will look into the adjusting the clutch pedal.

I let a friend borrow my Neon for a bit and it ended up breaking down on him. Basically it looked like it tore the clutch up, so I had it replaced by a mechanic from my neighborhood. Got a couple of issues going on right now still and looking for a little direction. 1. I have a grinding noise when s...

Where did you get that image from?

The crazy thing is I took it to 2 shops and they did some kind of electrical test and said I prob got a bad starter out of the box when I replaced the one I had. When I fixed the problem, thanks to you guys on the forum, I just laughed at it cause it ran $35 for each test.

Sorry for the late response. It ended up being the battery Terminal connectors. The 2 screws that hold the wires in place for both the positive and negative were loose. So I replaced both terminals, cause they didn't look so hot, and everything is running smooth. This even fixed a lag I was having w...

I just went to start my neon and it won't turn over, nothing. I took the battery out and had it tested and it tested good. Starter, alternator and battery all less than 6 months old. Anyone have any ideas?

Thanks in advance!!

So I could get away with swapping the SRT Struts over along with the 215's and then go get some 205's installed?

Why is it not recommended on not using 215's?

What about leaving the tire the same and swapping out the strut from an SRT? Will this fit and if so will it hurt the vehicle?

SRT wheels are 215/50ZR17.

Didn't know since I already had tires if the SRT struts would fit on a 2001 Dodge Neon ES. That way everything would be proportionate.

One more quick question. Is there anyway to tell if it is a NGC block by looking at it?

Just thought I would post this article I saw while doing a little research.

http://www.enginebuildermag.com/Article ... r_24l.aspx

I am correct in what I am thiinking and that is everything will bolt up the same?

I have been doing a little research and it looks like the 2003 and up dodge stratus uses a ngc 2.4l block. So does this mean that if I can find a block from one of those years that all I have to do is swap out the internals and then put my SRT-4 engine back together?

Ok. Had heard good and bad things so just wanted to see what other people thought.

Thanks

Is this block used in any other models other than a 2003-2005 Neon SRT?

Won't painting or powdercoating a engine block retain heat? I mean you want to keep your engine cooler, so I would think painting it would defeat the purpose. Don't get me wrong if I knew it wouldn't have any bad affects, like retaining heat, I would do it in a heartbeat.

any part numbers for a new block or prices?

I have a question concerning the SRT-4 Engine Block itself. I bought all the parts I need to do an SRT-4 swap from a junkyard for about $1300. The one thing I noticed when I got the engine home was that the 2 wings where the transmission mounts up to the block were broke. Will it be ok to have those...

So when you do a swap you will have a different key to unlock the doors and to start the car?

I have the Siemens module and PCM. Do i need the ignition key that started the old car?

I will have the side skirts and rear bumper also. I am doing an SRT swap so I figured why not have the body style also. I mean the guy at the junkyard that I got my parts from gave me everything for $1300. Motor has 31000 miles on it. And it looks to be Stage 1.

What do you mean it would look fake?

Ok. And if I switch to an 2003-2005 SRT front bumper will there still be a gap?

I am looking to get an SRT Hood or something similar. There is a hood for sale in the Parts section and what I am curious about is if anyone knows if it will fit a 2001 Dodge Neon ES. Here is the link where it was posted http://forum.2gn.org/viewtopic.php?t=51953 When I have looked online I see that...

I have gotten me a donor car but have a question. On the list of things to get it talks about: Sentry Key Module + Key that matches the PCM VIN number. Is this stating that I need to Key for starting the car? Or is it a dongle like piece? Where would it be located? ### Update ### I found a link to a...

Ok. That is cool. I new a junk yard that had an R/T with an intake on it and since I am going to due a swap to an SRT and needed one figured I would take a chance. I am going to do a little bit more reading cause I have read a bit about swapping into a 2001 neon you have to do a couple of things dif...

Will a R/T intake manifold work good with a SRT. I plan on doing a SRT swap but the SRT I am getting he sold the intake manifold already. I can get a intake manifold off an R/T but wanted to know if they would be ok?

I picked one of these rear view mirrors also. My neon doesn't have the red plug under the dash. So I was thinking of going back to the junk yard and pulling the whole in-dash wiring harness and fuse panel and swapping it out with mine. That way when I switch over to power windows and power locks. Ev...

I was looking at getting power windows, power locks, lighted rear view mirrors, power side-view mirrors amongst some other things. When I look at the wiring under my dash there are some plugs that I have seen on other neons at junkyards that mine doesn't have. How hard would it be to grab the "In da...

Feedback for: SRT_coupe
Person in Transaction: Buyer
Rating: +1
Comments: Quick shipping, very reasonable price, great communication would do business with again

Feedback For: Canada
You in the transaction(seller or buyer): Buyer
Feedback Rating: A+++
Comments on the transaction: Great transaction. Went above and beyond what was expected. Buy and sell with confidence, eh.