Search found 106 matches

by loroku@aol.com
Sat Dec 15, 2012 3:50 pm
Forum: Drivetrain
Topic: Need a clutch, any ideas?
Replies: 31
Views: 10482

i suggest for the street a spec stg3+ which has a full disc just make sure you break it in correctly
by loroku@aol.com
Wed Dec 05, 2012 6:03 pm
Forum: Forced Induction
Topic: few turbo questions
Replies: 19
Views: 4437

you cannot run a rising rate fuel pressure regulator without the spoolboy mod is also known as a return fuel system. and for the same cost as the rrfpr setup you can get bigger injectors and an aem fic 1913 i was one of the pioneers of the fic on the neon check over on neons.org for turbo manis and ...
by loroku@aol.com
Wed Dec 05, 2012 5:33 pm
Forum: Forced Induction
Topic: ARK design Advanced boost controler
Replies: 0
Views: 1908

ARK design Advanced boost controler

some of you may know this but Ark design USA is closing shop here in the USA but they are liquidating all of their stock as of right now they have one of the best simple EBCs out there its as good if not better than the Greddy Profec and the Turbosmart street well they MSRP for $350 they are liquida...
by loroku@aol.com
Tue Nov 13, 2012 7:12 pm
Forum: Progress/Project Log
Topic: ThatKevin's Boosted '02 R/T - aaanndd it's DEAD. :'(
Replies: 471
Views: 80978

get the clutch in yet?
by loroku@aol.com
Sun Nov 11, 2012 12:14 am
Forum: Progress/Project Log
Topic: Caraudioholic24's Progress Log "SATANS SPAWN"
Replies: 246
Views: 46440

dude awesome car i love how it looks the hood and the bumper go together really well
keep up the good work man
by loroku@aol.com
Mon Oct 22, 2012 9:13 am
Forum: Progress/Project Log
Topic: Dohc turbo swap
Replies: 63
Views: 14754

probably 18psi before you knock maybe
do you have a link to your race car??
by loroku@aol.com
Wed Oct 03, 2012 10:01 am
Forum: Drivetrain
Topic: spec stage 4
Replies: 3
Views: 1775

actually the opposite the less pucks the more chatter the faster the engagement and the higher rpms it'll be ok with if you want a street clutch get the 6puck if you want a track clutch go to the 3puck
by loroku@aol.com
Wed Oct 03, 2012 9:58 am
Forum: Drivetrain
Topic: Need a clutch, any ideas?
Replies: 31
Views: 10482

i have a fx400 for sale it will hold alot of tq and its all ready broke in just needs to be bolted into a car :rockon:
by loroku@aol.com
Sat Jul 07, 2012 9:45 pm
Forum: Photoshop Requests
Topic: color change
Replies: 0
Views: 2301

color change

Image
Image
can i see my car in satin white?
thanks
taylor
by loroku@aol.com
Tue Jun 05, 2012 10:17 pm
Forum: Forced Induction
Topic: boosted 2gn sohc neons!
Replies: 56
Views: 7857

a set of srt stg 1's shpuld make your hp goals no problem :thumbup: and a walbro 255 intank i would suggest a return line as well
by loroku@aol.com
Tue Jun 05, 2012 9:54 am
Forum: Forced Induction
Topic: boosted 2gn sohc neons!
Replies: 56
Views: 7857

if hes using the 03-05 r/t rods with arp rodbolts i bet he could make some serious ower as they are the same material as the srt4 rods which can take over600whp you just need to know how to tune everything right :thumbup:
by loroku@aol.com
Tue Jun 05, 2012 8:56 am
Forum: Forced Induction
Topic: boosted 2gn sohc neons!
Replies: 56
Views: 7857

Ive been told i cant do alot of things on these neon boards over the years i tend to only listen to a select few people now, My car should take over 250hp quite easily IMO, I will be doing piston and rods over the winter and upgrading from a 50trim to a gt3076 and making some real power if yo haven...
by loroku@aol.com
Tue Jun 05, 2012 8:45 am
Forum: Forced Induction
Topic: boosted 2gn sohc neons!
Replies: 56
Views: 7857

Hudson_Neon wrote:no matter what, you'll never see anything reliable over 250 on a stock bottom end. cody did it and got SUPER lucky
whats stock? stock rods? dohc head? stock rod bolts cause thad over on the big .org was makeing close to 375whp on his sohc bottom end and dohc head with only arprod bolts.
by loroku@aol.com
Mon Jun 04, 2012 5:26 pm
Forum: Forced Induction
Topic: intercooler
Replies: 5
Views: 2058

the fwdmotoion unit is longer yes ive heard nothing but good things about ets from the evo/sudie/ dsm/ srt4 guys who have them love them.
by loroku@aol.com
Mon Jun 04, 2012 9:23 am
Forum: Forced Induction
Topic: intercooler
Replies: 5
Views: 2058

after lots of reviews as this is going on a 1gn running a pte cea 5557 im getting the ETS DFMICits priced right and i want to keep my core support and it fits my bumper opening the best as well as the best core design on the market today
by loroku@aol.com
Fri Jun 01, 2012 8:46 am
Forum: Forced Induction
Topic: TD04LR-15Gk or Super 20g turbo 2.4
Replies: 8
Views: 2902

they have used the exact same turbos for ever its old earlys 90's tech way behind the curve.
that being said i would highly recomend the 20g over the stock srt turbo.
by loroku@aol.com
Thu May 31, 2012 5:24 pm
Forum: Forced Induction
Topic: TD04LR-15Gk or Super 20g turbo 2.4
Replies: 8
Views: 2902

the hahn units are tdo5 with 10.5 cm2 housing they r outdated
by loroku@aol.com
Wed May 30, 2012 4:50 pm
Forum: Forced Induction
Topic: TD04LR-15Gk or Super 20g turbo 2.4
Replies: 8
Views: 2902

its like a to4e .50 trim
and the hahn unit is a tdo5 20g so it has te smaller compressor the are just typhoon/cyclone turbos the td06 is a better turbine but spools later 90% of spool time comes from the turbine
by loroku@aol.com
Wed May 30, 2012 10:54 am
Forum: Forced Induction
Topic: TD04LR-15Gk or Super 20g turbo 2.4
Replies: 8
Views: 2902

um easy 20g insta spool is only good for burn outs period.
by loroku@aol.com
Wed May 30, 2012 10:10 am
Forum: Forced Induction
Topic: intercooler
Replies: 5
Views: 2058

intercooler

guys im looking to upgrade from my chillfactory intercooler which is same side cross flow similar to the hahn sidewinder just not as thick. im looking at the ETS directfit MPx BFMIC agp direct fit intercooler im looking for he most efficient intercooler i can get the mpx as i suspect has the worst c...
by loroku@aol.com
Thu May 10, 2012 9:54 am
Forum: Forced Induction
Topic: ebc
Replies: 0
Views: 998

ebc

which electronic boost controler are you running? how much do you like it?
thanks all im in the market for one right now
by loroku@aol.com
Tue May 01, 2012 11:00 pm
Forum: Forced Induction
Topic: big turbo time! am i missing anything? (srt4)
Replies: 46
Views: 10470

stock srt4 uses a water/oil cooler it works well make it so your oil temps r not sky high but a thermostatic oil sandwich and a front mount air/oil cooler would be a good way to go.
Taylor
by loroku@aol.com
Mon Apr 30, 2012 10:44 am
Forum: Forced Induction
Topic: big turbo time! am i missing anything? (srt4)
Replies: 46
Views: 10470

nope you could add an air to oil oil cooler if you want but you do not have to
even tho the srt4b has an oil to coolant cooler built in
by loroku@aol.com
Fri Apr 27, 2012 11:44 pm
Forum: Forced Induction
Topic: big turbo time! am i missing anything? (srt4)
Replies: 46
Views: 10470

oil cooling is fine as long as you dont mind either driving around a bit or letting the engine run for a while after a boosted run to cool the turbo donw so it doesnt coke the oil on you watercooling is similar to this but it does it faster
by loroku@aol.com
Thu Apr 12, 2012 5:01 pm
Forum: Forced Induction
Topic: 2.5 or 3"
Replies: 2
Views: 1196

any turbo can benifit from lower back pressure.
by loroku@aol.com
Thu Apr 12, 2012 4:59 pm
Forum: Forced Induction
Topic: whos all running a hahn or chill factory 16g turbo?
Replies: 2
Views: 1269

whos all running a hahn or chill factory 16g turbo?

hey guys not sure how many ppl are running hahn/chillfactory 16g turbos? i recently found a good altenative to having deal with the stupid ppl at hahn trying to get it upgraded to a 20g. forced perfomance will upgrade your tdo5-16g-10cm2 to their HTA 68 compressor wheel andi beleve anti-surge compre...
by loroku@aol.com
Mon Apr 09, 2012 12:26 am
Forum: Progress/Project Log
Topic: parabola's project log-New oil pan
Replies: 32
Views: 7567

low boost turbo :rockon: 230whp :beatstick:
you could jack all the parts from an atx gt crusier :D
by loroku@aol.com
Mon Apr 09, 2012 12:17 am
Forum: Progress/Project Log
Topic: z3roneo's DD neon is gone.. Close/lock thread please..
Replies: 358
Views: 96092

i like how that vent looks tho its location is very close to the windsheild which is high pressure if you run a gurney flap infront of the vent it will be much more effective.
by loroku@aol.com
Mon Apr 09, 2012 12:16 am
Forum: Forced Induction
Topic: big turbo time! am i missing anything? (srt4)
Replies: 46
Views: 10470

the cams will help it breathe better making your goal easier to acheieve. you should trys a 044 pump for the intank pump
by loroku@aol.com
Sun Apr 08, 2012 4:48 pm
Forum: Forced Induction
Topic: big turbo time! am i missing anything? (srt4)
Replies: 46
Views: 10470

thats not a bad price just make sure you upgrade your springs too as the crowers will eventually cause spring failure. springs r like $70.

Go to advanced search