Search found 20 matches

by Rootna318
Mon Apr 08, 2013 5:51 am
Forum: Naturally Aspirated
Topic: Head work questions.
Replies: 13
Views: 2321

Well, I have the plug to seal the egr. The head will be decked .050 down and have a mild p&p then be gasket matched to the ITB intake manifold.
by Rootna318
Mon Dec 10, 2012 1:35 pm
Forum: Naturally Aspirated
Topic: fastest dd 2.0?
Replies: 52
Views: 6718

ok, the mag springs are brand new so i know its better than just trying to keep the stock ones. and i keep looking at MS but not to that point cost wise yet. still in college. Also with the head being decked .050 and the crane 12 i shouldnt have to worry about trimming the valve stems? also valve to...
by Rootna318
Sat Dec 08, 2012 12:25 am
Forum: Naturally Aspirated
Topic: fastest dd 2.0?
Replies: 52
Views: 6718

ok, i know the only dumb question is the one that goes unasked so... if i had a set of larger injector laying around that i know have a higher flow rate than the stock ones. would that take care of my fuel issue or would the computer still not be very happy about it? and if i did try the 14 would it...
by Rootna318
Fri Dec 07, 2012 1:56 pm
Forum: Naturally Aspirated
Topic: fastest dd 2.0?
Replies: 52
Views: 6718

ok, i can go to the .050 down and still have a crane 14 on pump gas. that would be a hefty lope wouldn't it? also this is an automatic car, not going to change that until the trans gives out do to being over powered. just rebuilt it. would i be better with a #12? or just go to the #14?
by Rootna318
Wed Dec 05, 2012 3:24 pm
Forum: Engine
Topic: 03 SOHC Computer??
Replies: 15
Views: 1416

it was in reply to boostalot it wasnt about computers what he had said. just clearing that up.
by Rootna318
Wed Dec 05, 2012 1:31 pm
Forum: Engine
Topic: 03 SOHC Computer??
Replies: 15
Views: 1416

im not much into the math of cam rotation yet, im in school and we have a full shop that i can use as needed. so head work and such will be first but im afraid i havent learnd much about cam duration. figured it would be easier to buy a cam rather then continusly mess up with incorect calculations. ...
by Rootna318
Wed Dec 05, 2012 1:24 pm
Forum: Naturally Aspirated
Topic: fastest dd 2.0?
Replies: 52
Views: 6718

ok, i have an 03 SOHC and i baught a spare head. im in a high performance school and can have the deck dropped for free along with a good port to match and polish. how far should i or could i deck it down with a crane 10 cam before i have to worry about resesd pistons? im trying to do a n/a build. b...
by Rootna318
Mon Dec 03, 2012 3:27 pm
Forum: Engine
Topic: 03 SOHC Computer??
Replies: 15
Views: 1416

hmm, i have heard about a cross between the sohc and srt4 but never heard how it turned out or if it worked. thanks. ill be looking into the aem ones for sure.
by Rootna318
Mon Dec 03, 2012 1:58 pm
Forum: Engine
Topic: 03 SOHC Computer??
Replies: 15
Views: 1416

03 SOHC Computer??

ok, its not exactly what normal people would do but im trying to see what the max is i can get out of a sohc engine :twisted: . i know its not cost effective but i have a machine shop at my disposal :rockon: so no cost there. but now the important part. the 03 neons are very limited by their engine ...
by Rootna318
Tue Nov 20, 2012 3:42 pm
Forum: Naturally Aspirated
Topic: Head work questions.
Replies: 13
Views: 2321

true, good point. guess ill just make the block off plate. just incase i end up selling it.
by Rootna318
Sun Nov 18, 2012 3:58 pm
Forum: Naturally Aspirated
Topic: Head work questions.
Replies: 13
Views: 2321

ok, thanks guys i didnt know about the curve in the exhaust side of the head. ill be port matching it to the magnum intake gasket because thats what will go on with it. and the egr i meant theat a plate would be welded on but seeings how it is aluminum and so close there it will just be getting a bl...
by Rootna318
Sat Nov 17, 2012 6:13 pm
Forum: Naturally Aspirated
Topic: Head work questions.
Replies: 13
Views: 2321

ok, well it will be decked .040 and port and polished. so thats what i will be selling.

What do you mean by the floor and the hump?

not sure if i understand or if i have heard what your saying in just other terms.
by Rootna318
Thu Nov 15, 2012 12:31 pm
Forum: Suspension, Steering & Brakes
Topic: Flushstance.com
Replies: 16
Views: 2100

ill be in lima for almost a year till i go home so city streets and no big bumps, home isnt city at all lol we still have a couple hard pack dirt roads not OH NO dirt roads, they are nice and smooth, and B E A utiful for pics.

and with a nice drop and stance itll be nice.
by Rootna318
Thu Nov 15, 2012 12:24 pm
Forum: Naturally Aspirated
Topic: Head work questions.
Replies: 13
Views: 2321

well i know its not big hp or anything like that, but i have decided to go for a 2.0l N/A build, im not expecting high hp or anything but its my daily so. As for the head, i guess the deck will be dropped .040 i could go the extra down to .050 because we have everything to take care of seats and ste...
by Rootna318
Wed Nov 14, 2012 9:54 pm
Forum: Suspension, Steering & Brakes
Topic: Flushstance.com
Replies: 16
Views: 2100

ya, the kit im looking at has front and rear camber plates, also i have the links ( control arms) already. as for ofset wheels my friend has a set he ran on his neon that was stanced out like the ones above and ill be buying his. and i wasnt going to stretch the tires, i was thinking more like the r...
by Rootna318
Wed Nov 14, 2012 8:51 pm
Forum: Suspension, Steering & Brakes
Topic: Flushstance.com
Replies: 16
Views: 2100

yes, i understand haha. sorry for the slight confusion. they will be sitting up until the drive way gets done, the end im having filled to make the angle lighter, then i can adjust the rest down to where i want it so it wont scrape so much. i know they are static not like bags on a switch. i meant t...
by Rootna318
Wed Nov 14, 2012 9:59 am
Forum: Suspension, Steering & Brakes
Topic: Flushstance.com
Replies: 16
Views: 2100

those are all gorgeous :laughing3: thats all exactly where im looking to be for hight. an just as important for where i live i need to keep it adjustable so i can go up just a hair to get in my driveway lol
by Rootna318
Mon Nov 12, 2012 10:47 am
Forum: Naturally Aspirated
Topic: Head work questions.
Replies: 13
Views: 2321

Head work questions.

Ok, i have an 03 se and i have a spare head with a machine shop at my disposal. UNOH college has some fancy tools so im having the spare port/polished and decked. my question is how far can i go on the deck to boost compression? ill be getting a crane 10 mid range cam to go with it. on another forum...
by Rootna318
Mon Nov 12, 2012 10:18 am
Forum: Suspension, Steering & Brakes
Topic: Flushstance.com
Replies: 16
Views: 2100

ok, thanks for the input, and if i may so dang na thats a nice look, thats actually the whole look im going for. hight and how clean, mine is still a project sorta. itll be about that hight and not sure but might to just a little camber, not stupid amounts. and my roommate has decided that due to ro...
by Rootna318
Mon Nov 12, 2012 12:21 am
Forum: Suspension, Steering & Brakes
Topic: Flushstance.com
Replies: 16
Views: 2100

Flushstance.com

i was looking into suspensions and i know i like the look of having slight camber... not stupid camber. and i cam across flush stances complete coilover kit. I would ofcourse opt for the extreme drop with an added $75 to the already $995. but what i really want to know is, does anyone know much abou...

Go to advanced search