Search found 4 matches

by 2.34g63
Thu May 16, 2013 9:47 am
Forum: Drivetrain
Topic: 02 se atx to mtx swap problem
Replies: 14
Views: 2236

What color is the wire. For pin 66 on the ecu? Is that white and orange also? I got the clutch working just no Speedo but I'm not sure I hooked the Speedo wires up right
by 2.34g63
Sun May 12, 2013 11:01 pm
Forum: Drivetrain
Topic: 02 se atx to mtx swap problem
Replies: 14
Views: 2236

Grounded the brown and yellow wire runs decent but hits the 4k rev limiter. Also the speedo doesn't work. Can I bypass these things or do I need to get a mtx ecu? If I do need a mtx ecu can I get one for a non imobiler even though my car initially has the imobiler with the grey key that way I wouldn...
by 2.34g63
Fri May 10, 2013 7:47 pm
Forum: Drivetrain
Topic: 02 se atx to mtx swap problem
Replies: 14
Views: 2236

Yeah I got everything from the 00 for 100 bucks from the u pull it yard. I don't have the ecu. I wasn't 100% sure I needed it.I'll have to get one.the clutch switch has three wires on it. ones the ground, ones the power, and one is the signal to the ecu?
by 2.34g63
Thu May 09, 2013 5:04 pm
Forum: Drivetrain
Topic: 02 se atx to mtx swap problem
Replies: 14
Views: 2236

02 se atx to mtx swap problem

I have a 02 se that the atx went out on.so I went to the salvage yard and got everything to swap it from a 00. I have everything mechanically swapped and finished but I cannot get it to start. I have read about the three wire plug for the neutral safety switch but mine doesn't seem to have this thre...

Go to advanced search