Search found 3566 matches
You're mixing and matching wrong. DSM AWD drivetrains bolted to the Mitsu 4g63, not the Chrysler 420a. You could certainly fab some stuff up to make the 4g63 fit, but be prepared for lots of cutting and such. And if you can't weld, just stop.
- Sat Jan 18, 2014 2:47 pm
- Forum: Forced Induction
- Topic: 03 r/t turbo thought good/bad idea
- Replies: 13
- Views: 1632
If you keep the boost down and tune it nice and fat, you won't blow it up. Just don't get greedy on the boost, as the more boost you run, the more you have to do to keep it safe.
- Fri Jan 17, 2014 5:15 pm
- Forum: Suspension, Steering & Brakes
- Topic: Another option for lca bushing
- Replies: 8
- Views: 1130
HUGE performance upgrade for forward traction. With stock bushings and even polyurethane, the flex causes toe out during acceleration. That severely hurts traction. To get into some more specifics, when you accelerate, the control arm is pulled toward the front of the car. The bushings flex and allo...
What kind of fuel will you be running? The more detonation resistance, the harder we can work a smaller unit to get quick response. I would say with pump 93, you want something in the 55-58mm compressor inducer range. With e85 or pump race gas, 52-55mm. The one we would probably do the most for 400 ...
I'll see what I can do. I can tell you that I would be more likely to be able to work it into my schedule if I got to see everyone's junk. Actually, now that I think about it, pants are just fine.
I'm wearing pants. They are lovely. I bought a headlight today. Not like a driver's side or passenger side. The kind meant for spelunking. It's so glorious I just did the dishes wearing it so I could see every little spot. I think they should be a new fashion trend. If fanny packs can be worn, I'll ...
- Sun Jul 14, 2013 8:44 pm
- Forum: Previous 2GN.org National Meet Discussions
- Topic: 2013 All Chrysler Nationals/8th Annual 2GN.org National Meet
- Replies: 649
- Views: 41515
Really? I thought you slept in the recliner. No wonder my butt hurts.Hudson_Neon wrote:on the road again after spooning for a few hours with erick
- Sat Jul 13, 2013 6:27 pm
- Forum: Tuning / MegaSquirt
- Topic: Megasuirt wiring/ngc... need experts on wiring
- Replies: 7
- Views: 1331
Nope, never going to happen. NGC PCMs only have the NGC crank decoder programmed and there is specific memory space for it that can't be replaced without programming the ECU from the ground up. You are going to have to run general purpose outputs or a mechanical switch for the fan and an external re...
- Mon Jun 24, 2013 9:43 pm
- Forum: Off-Topic
- Topic: What is your long term project plan for your vehicle?
- Replies: 7
- Views: 1206