2GN.ORG

very helpful, thanks.

do you recommend a aobe or missing link? i have read all over the place that making aobe's are a pain, some do not work, people try 4 or 5 times with no success, and i found missing links on ebay pretty cheap, so im leaning towards that, how are these plumbed into the setup?

i have another part to cross off that list, a friend had a fuel rail laying around for his 1st gen neon so he gave me a free-bee http://www.suncitycruiserssite.com/images/rail01.gif so, i searched around, im still unsure how to find my base pressure for the rrfpr based on my injectors, or just hook ...

is there some kind of forumla that i can use to find my base pressure for my rrfpr using what ever the lb/cc injectors that I end up going with?

or how would that go?

thanks.

oh yeah, i think im going to go with the stock 03 srt4 injectors which i think(off the top) are 527cc

well i know that i can use the schrader valve on my stock fuel rail, but i figured I would go ahead and get a new one just to add some red accent under the hood. so I should def be able to run this entire fuel setup without actually having the turbo on? hmm, am i going to need a inline fuel filter b...

if im not mistaken the BEGi can be ran without boost hooked up to it and I could just adjust it untill my a/f ratio is around 14.7:1 i just really dont want to spend $700 and have it lay around untill i can get another $700 to finish! lol, im sure you know what that must be like, also i know I wont ...

yeah, i think im wanting to complete the list a little more, and i think spending the money on the fuel system i would at least be able to install and set it up and have something to work on. so im thinking: lorenzo fuel rail - $145/website - got free 527cc srt4 injectors - $50/ebay - now have BEGI ...

i have stumbled upon $700, right now all i have for my setup is the manifold/turbo(with srt4 drain line, oil line, both coolant lines), everything else on my car is stock, except the head. oh yeah..and a fuel pump w/spoolboy mod. so what do you guys think a good next spend would be with $700? i coul...

//

i have the same exact problem...

my cord was ripped out, for some reason, i replaced the battery anyway and tucked the sensor away, all is well now.

now i need to fix my moisture infested headlight...

sorry if this has been asked, but do 00-02 taillights fit on 03+ models? I have been looking for clear taillights for a friends srt4 forever and i only see them for -02

thanks.

i went to have a new battery put in and they ran a battery test on my old one: battery: 12.30v rated for 450cca tested @ 432cca charging: load off 13.27v, load on 13.31v they said the machine report a 'diode ripple', and possible a wire is loose on my charging system?? i jacked up the car and looked...

as for as a year now my battery light has been on and I never payed any attention to it, now after changing the suspension on my car and letting it sit for a day the battery dies after 6-8 hours. i took it for a wheel alignment and figured i needed a battery also but they called me up and said my ba...

has anyone had a rattling noise coming from the general direction of the timing belt area, something is rattling when i hit 2500+ rpms. i cant really tell what it is, buts it annoying!!

this was after taking off my power steering and ac.

it is sort of pricey.. i was also thinking about junkyarding for one, but i think ill just buy it new. i ordered my coolant and oil lines today, everything came to 60 some bucks with a discount. I been searching for a nice diagram, trying to figure out where the oil drain line feeds to? back into th...

i did some searching and found these $40 v band clamp kits, this should be what im in need of, correct?

3rd product down
http://www.ssautochrome.com/level.itml/icOid/1490

i will just have to measure to be sure its 3'' clamp i need...

it is a must (to my knowledge)

i found this thread really helpful reading when choosing my fuel setup.
http://forum.2gn.org/viewtopic.php?t=45 ... urbo+setup

do you know if this is some kind of pressurized clamp? or would any clamp work. i tried to get it from dodge and they indeed said they only sedd the unit as a whole like you said...

sweet, to be sure im on track the vclamp is going to be what is holding the turbine to the manifold correct? and the other parts you listed the return line fittings, oil drain fittings etc should be just fitting ordered from dodge? the coolant in line is coming from the overflow bottle split, the co...

ok, someone ran off with my camera but they came back withit, so i took some more pics, i dont know how i missed this the first time, but my ports are blocked off where the srt4 ports are blocked off, how ever in that link posted like it was said, only one of each pair is blocked off.. if the turbo ...

i will post some more pictures of the other ports tomorrow, i do see how he has the 2 sides having 1 port plugged each in that previous link sent. I wonder if i can use any clamp or have to order one from the dealership to be all airtight and what not. would any of you guys having some kind of diagr...

on my buddies car they are actually plugged and not in use, i will post a picture soon of his and mine in same position.

Thats what i have been looking into, but see in the first image where there are 2 bolt holes, looking on my friend srt4 they are plugged with something, does anyone know what these are for?

i got my turbo and manifold and i'm not sure if i'm missing parts off it. the turbo came unbolted from the manifold, is there supposed to be some type of clamp? does anything else look wrong? http://www.suncitycruiserssite.com/images/turbo1.jpg http://www.suncitycruiserssite.com/images/turbo2.jpg ht...

did one in blue too, just for kicks.

my stab at your first image, the rear end is kinda screwed up..

i wasnt sure how a 2tone should wrap the front bumper...

this site is getting insane amounts of hits... like 200+/min, actually, doing the math its 136ish hits a min, and if you do that for 30 days, its just over 5 million...

hmmmm, im gonna say its rigged.

for 00-03 the tachometer is the black/grey wire from the ignition coil, i would bet it also is on the 05. hope this can help you.