2GN.ORG

The reason I asked the question in the first place is to figure out if this was a common problem..... Yes, it was caused by the horn switch in the airbag... Since I've never worked on airbags before I enlisted a professional...engineering tech that works for the manufacture.... We basicly ordered a ...

I guess just pull the airbag....and see what I can find?....thanks guys

Hey guys, I have a 01 neon that the horn is stuck in the On position.... It's a bit of head scratcher since my Dad was driving it and I have no real clue why? He pulled the relay to get it to shut off.... I checked the relay and swapped it with another one... same thing...So anybody else have this p...

Wow, other than the brake area they don't look different at all? I'm not sure why you would have to modify the inner tie rods at all? The distance appears to be the same? Thanks....

The basic design of this rack has been used from the 80's cars.... I'll do some asking about it.... I've never had one rattle..... Sway bars.... Control arms but not the rack..... I'm still not sure how your wearing it out.... the bushing on one end is at least 1/4 thick in diameter...... The yoke w...

Well let me see if I can I can understand better what's wearing out.... Starting from inner tie on the drivers side, you have a little plastic piece that limit rack travel that's the rack stop... The next piece that comes into contact with the rack is the pinion... Directly behind this is the yoke.....

Hey the drawning that I'm showing is the driverside mount is securely fastened to the K-frame and the passengers side has a u bracket with a rubber isolater.... I'm not sure how it could wear?

The mounting bushing wore out? Wow.... that's a new one for me.... At how many miles did that happen.... I'll did into that one too.....

Yep..... SRT vs neon would be great..... A photo of where the tie rod attaches would be the best....

Hey gents I was trying to figure out what needs to be done to convert to SRT-4 brakes on my neon. I searched the sites and some people say you either need the SRT rack or trim the factory neon inner tie rod ends. Well since I work for the company that makes the racks I dug into it father. The neon s...

I have 43 ,000 on my 01 and 5900 on my 04 SRT-4 LOL...neat car

Yep, Great buyer.....Thanks again!

I sold him the SRT-4 front bumper....Great buyer.....fast, easy to deal with...Thanks

Yep it fits....Augh the sound leaves a bit to be desired.... I own a SRT-4 and a 01 ES. The SRT-4 exhaust on the 01 fits without any adaptors since I used the lead pipe as well as the rear section. The sound is terrible at 3000rpm...It buzzes. My solution was to install a borla 2 1/4 muffler in plac...

Hey guys, Stage 1 springs are the same as SRT-4 springs if you use the SRT strut. I found this out this past weekend. Here my combination 2001 Neon 2.0 / auto SRT Struts Stage 1 springs 205/50/17 SRT wheels Guess what? It measures to within a 1/8 inch of my production 04 SRT-4 If you use the stock N...