2GN.ORG

already got coilovers... thanks

After doing months of research and what not, I decided to not turbo my car. So, im guna just do some bolt on mods for right now. My question though is I wanna upgrade the flow of a few things. Im boring out my throttle body an intake manifold for more air, already have plenty of exhaust, but I want ...

Thanks... Thats just what I needed

will the rear disc brakes off a srt-4 bolt up to the sxt without alot of modifications? I have a set of rear brakes from a srt given to me so I would like to upgrade if I dont have to do to much to swap them out.

I have a buddy of mine that has a 05 stratus with a 2.4 DOHC. I have an SRT-4 complet turbo setup he wants to buy from me. Iv already checked just to double check, but the exhaust bolt pattern are the same. The 2.7 DOHC are not the same. So my ??? is the turbo setup will work for his stratus? Bolt u...

Im pretty sure its a 03. My buudy text me an told me it was up there an gave me little details on it jus that the motor was good. but 03 04 for sure

So i have a chance to buy a pt criuser with a 2.4 DOHC for less then 1000 bucks at the junk yard. motor is good, was totaled at the rear driver side. and i bought a srt-4 turbo setup with the manifold an everything off of craigs list about a year ago. So if I get the pt an put the motor an tranny in...

makes since... but what if I put a DOHC on, and wired it up and everything else. Then I should be able to use the srt ecu? Iv done alot of research and asked alot of ?? about the turbo topic. I wanna know whats the best way. I pretty much know how to do anything, or I can learn fast. 1. Is the SRT-4...

So i got some srt-4 injectors and a a srt-4 ecu. Im going to put them in my sxt mtx. First i know i have to take the ecu down to the stealership and have it flashed to the key and what not. But my question is i was told that if I put the srt ecu in, it would be jus the same as the MS. It would chang...

So I wanna get this straight. The DOHC off an srt will fit the 2.0 sxts? I got a srt-4 turbo setup in my garage i wanna put in but theres no more mattdog adapter plates. But im reading on this forum that a DOHC swap is possible between the 2.4 an the 2.0. Besides some wire modification an a cam sens...

so if I put in bigger injectors I can run a turbo?

Do the SRT-4's have the same fuel pressure as the SXT's at 59 psi? The have the same stock sending unit and pump. Just curious because if they are, why can the srts run a turbo on the stock pressure and the sxts cant. I wanna turbo my car, I have it in the grage, but I really really dont wanna modif...

Yeah, I hooked up my scan tool to it yesturday. And got the P0301, missfire in cyl. 1. SO i bought some champion plugs an put them in last night. She runs like new. The coil is a new msd, and im goin to buy new wires this weekend just finish up the tune up. Thanks for all the help guys...

The monitor icons where bleeking on the scan tool. Doesnt tell me any more then that. But I know its the new cat. Il just clear them with the ST. Theres no engine light. Its just the location of the O2 bung on the cat. The sensor plug is right in the middle of the stock cat, while the high flow Mag ...

ok guys, I found the problem. I hooked up my scan tool to it and it sure enough through a code. Its P0301. Missfire in cylinder 1. So a tune up is due for her this weekend. I put a high flow magnaflow cat on last month, an got a breif engine light soon after. but it went away the same day but the sc...

Also, I was running the spoolboy sending unit for about a month or so. I couldnt get the fuel pressure up to where it needed to be so I took it out and put a brand new stock sending unit in. But the car ran lean for that time i was using the spoolboy and was doing it even worse. When i put the stock...

Ah, my bad, I didnt even stop to think what mtx an atx ment. haha, yeah its stick

The car has 60,000 miles. Iv only had the car for about 10,000 miles or so. I change the oil every 3,000 but im not sure when the last tune up was. Il try to find that how to with the CEL. If anything il stop by my buddies shop an throw a scan tool at it an let you all know what it says. I was think...

I got a 04 SXT. When I accelerate hard, it gets through 1st gear ok, all the way to 6,000 but as soon as I shift into second it boggles out aroun 3500. It feels like its starving. But im not sure. It basically accelerates like ass. Sometimes it wont accel to 4,000 an it stutters really bad an the en...

I put in a new altenator in my buddys 00 neon. after we got it all in and what not, we went down to autozone to pick his battery that was being charged. We got the battery put in an right when I put the positve battery cable on the terminal, it sparked like iv never seen before and before I could po...

I have an adjustable FPR and I thought I had it on right but i wasnt getting no more then 20 psi of fuel pressure. So I want to make sure i have it on right. I opend up the FPR jus to make sure it wasnt cracked inside. Its good. I have an external fuel filter before the fuel rail, and right after th...

I already have a 255 lph in my unit... I put that in there to complete the spool bot mod

Right on, that what i neede to hear. What psi range should I put the fuel prssure while boosted? Im guna be safe an run around 7 psi of boost...

Im about ready to turbo my 04 SXT, and I just did the spool boy mod. Im not having much luck with it right now, I wanna go back to the stock sending unit for a while. My car can still have the stock fuel system on it and run my turbo just fine right? Or do I need to upgrade the fuel system for that?...

I just got my exhaust done on my sxt. I bought a magnaflow highflow cat from modern performance, an took it down to my local muffler shop to be put on. I didnt notice til i got there, but the 02 bung on my stock cat is in the middle of it and the bung on the new cat is toward the end of it. The guy ...