2GN.ORG

are you planning on using these on a first gen? I don't know if i'd trust them or not... I've only heard of falken tires.

1. save
2. resist the urge to mod
3. buy coilovers

that's what i'm doing now.

yeah, or a short-ram log-style home-made manifold.

strange how they make 80mm throttle bodies for civics too...

I think it's intended for turbo applications.

ibtl loser.

With tires, everyone likes a different tire. I prefer goodyears especially since they came on the neon from the factory. Anyplace you get them should rotate them for free anytime you want. My place does. The squeal happens when you turn the a/c on doesn't it? See if you can tighten that belt. Someti...

maybe the fuel injector isn't in there all the way? My sister's first gen had the spark plug tubes pop up, and you had to push them back into the valve cover... try pushing it back in! You could also get someone to rev the car wildly in park and see if fuel goes everywhere... if you don't have someo...

It was on mythbusters. http://graphjam.files.wordpress.com/2009/08/song-chart-memes-mythbusters-method.jpg You're better off putting the windows down at low speeds ~40 and under. It will have almost no effect on fuel economy. When you're on the highway turn the a/c on. It's better than rolling the w...

needs a new battery.

+1. My battery started going, and it did the "gauge sweep" until my battery finally died.

you won't be able to rev over 4000 rpms, so drive it to the dealer and have them flash the MAGNUM software to your pcm

hansken_yo wrote:There is a solution... more like a good coverup

CAI and Exhuast... I'd suggest Borla. There will be enough good sounds coming from the car that it will drown out the annoying ones

That was the soloution to my problems...

RTFM. Prothane is much easier to install and actually lasts longer than a week.

[DJ]Tomski wrote:datsun=nissan

thank you. I'm glad someone picked up on it.

RTFM.

2.25 inches.

Make sure to search or next time you will be flamed.

You have been warned.

I wonder how the results would look on a 03+ NGC neon...

...they'd probably all be around the same numbers

lucky

i too would like to know baseline numbers. I don't think you'd need to drive the AF/X around. Yes, it still has the NGC code in it, but i don't think it would be an issue.

awwww snap!

Don't have the dealer do--ah it's too late. Expect close to $500+

it's ok to have the top off, but it's sucking in hot air from the engine bay. I believe you'll get better gas milage because of the less dense air... or that's what i've been told. If you leave the top on the air box will be insulated from the hot temps of the engine bay and your engine will run mor...

I've got an underdrive pulley and motor mount inserts. I have barely any shaking even if i try to make it and put the a/c on and put it in reverse. Maybe it's because I measured and put the torque struts back where they were supposed to go.

were you driving that datsun in your sig?

Ive done it before and its easy. On drum brakes whenyou adjust them you are also adjusting the ebrake. The drum is both. On disk the ebrake shoes are inside the rotor and can also be adjusted. Good point. Some people don't know that a rear disc setup has drums inside the top hat of the rotor. Rear ...

Average price for a used atx? Some lady wanted $250 and it had like 60k on it. I was going to go tell her to go f herself but i'm not sure on their going rate Somehow I don't think that would go over well. I think you did the right thing by not saying anything! :lol: If you really want it offer $20...

September 5. He returns. Someone let Howell not to take these off the website because they're not selling... we just want to see IF they work.

If there's no speed limiter, see how fast you can go on the dyno... Do a pull in 5th!

yeah, that clickidy-clickidy-clickidy sound is on my second gen and the two other first gens i have. Careful not to melt the camera.... that was WOT...

well, back to your original question. Yes, you can swap first gen discs into second gen neons. The rotors aren't as thick as SRTs, but they're discs. To be safe, I'd also get the backing plates. Get some stainless steel braided lines since you don't know what kind of shape the donor vehicle is in, a...

my guess is that it will fit. I wouldn't say Dodge is cutting corners, they're working smarter

your parking brake is messed up somehow. I'd park on huge hills and use the e-brake and i was fine. I'd pull it up slowly in traffic and i would slow down after about 2-3 clicks. I've got discs and if you pull it slowly it does the same thing. If you pull it all the way to the top it will lock up th...

Jeremy Clarkson thinks we should all have our licenses taken away? I used to like top gear before they bashed EVERY american car.