2GN.ORG

I called the dealer to get it reflashed and told them my problem they said there are alot of updates now and it would help out alot not only with the idle issue but other things as well such as fuel economy. They said there computer was down so they could not tell if it is going to be covered or not...

So I should not buy the IAC valve then?

Will before i drill, which is my last resort. An Autozone by me has the IAC valve for only $55 so I am going to just buy it and replace, to see what happens, my car has only 42k miles on it but I am just getting sick of this low idle crap. Some people even had said it might be the alternator? Will f...

What is your idle when warmed up stopped in drive?

I looked up some info and have found that our cars should be 500 RPM in Drive, 700 in Park / Neutral & for manuals a little higher. Is this true?
Will if worse comes to worse I might just go ahead and drill a small 1/8 hole into the butterfly to see what happens.

Thanks for your help. I will wait on the fuel reg for now and try to see if I can hear the iac working today. I must say after I had cleaned the iac and throttle body my idle did go close to 600rpm when in drive and stopped, but it should be higher. Again my problem is fine when in park it gets real...

I have a 2004. I heard if you mess with the idle screw the pcm will just take over to idle were it wants. I used throttle body cleaner to clean the iac today. It still did nothing one member on here had the same problem as me and he said he replaced the fuel regulator and his idle increased after th...

Does this really work? I am having the same problem with my idle, it is around 500rpm when stopped, but not all the time, sometimes it is at 750 but most of the time stays in the 500rpm range. Do you guys suspect it might be the fuel regulator? I already cleaned the IAC, so should I just drill a sma...

Kinda of odd you bought the car and now you are trying to sell it? You must have found out what the problem was with it now yoouu are trying to selling it to us We are not falling for that one, good try

Looks good, how do they sound with the sub box in the back?

Ok thanks, so far so good, I will keep you guys posted, it does seem a little stumbly during cold start up, but to early to tell yet, I will monitor everything and post here.
thanks

Thanks for the advice on the manifold, I have never took it out before. But I have heard of others on the srtforums say theres had blown out on the bottom right corner. As far as the idle at 600rpm, I am not sure what it had idled at before but it just seems a little more rough at idle now than bef...

Update: I replace the plugs and wires. It is too early to tell if it has solved my problem, so far I have not gotten a cel code yet.
As far as my ideling I have noticed when at a stop if idles sometimes at 800rpm and when seems to get hot it idles at 600rpm?

Ok no problem I will keep checking this thread keeping you guys posted and in the meantime I will try what I said tonight and wait and see if the code comes back.

Thanks for the advice on the manifold, I have never took it out before. But I have heard of others on the srtforums say theres had blown out on the bottom right corner. As far as the idle at 600rpm, I am not sure what it had idled at before but it just seems a little more rough at idle now than befo...

Ok thanks for the advice, my car is an 2004 sxt Coil is stock, wires are stock, and I have irridium plugs. I am first going to change the plugs to stock and gap them at .38 If I still get the code I might try swaping plug wires or try taking the #4 fuel injector and swaping it with the #1 to see if ...

Thanks I will try new plugs and see if that helps if not I will swap the number 4 injector with another to see if it is the injector.
I will keep you guys informed.

Ok I just got the P0304 code which is a #4 cylinder misfire. I know there are things to check like the coil pack, wires, plugs, fuel injectors, and intake mani gasket. I guess the cheapest place to start is plugs and wires. I already changed the wires and still getting code, plugs look good. My idle...

It is the little tiny peice of foam that is in your intake box.

Ok I got the MC from rock auto and already had installed it. It was identical to the stock one. I installed it and had to bleed everything again and wow what a difference. I have a nice firm feel to the pedal now, not that sponge feel. I am 100% satisified I did this and was well worth it. Thanks fo...

I hope its not the hub bearing bolt, I dont even have a socket to remove it.
I found this on the srtforums.
"It's the pad moving in the caliper. Stop it goes up, release it falls down. Nothing odd about it really, just allows for no drag fit to the rotor"
This may be my problem but I am not sure

Rear srt brakes are installed and everything seems to be working fine. However I notice that when i come to a complete stop and kinda press the brake peddle firnly in a fast motion I get this weird click in the driver rear? Not sure what it could be? This is how it goes, press the brake peddle fast ...

Maybe try ebay

Will I have heard that you can also use window silicone under the cowl, but I have no idea were to start?

I have this leak that when it rains water is on my passenger floor. I noticed it dripping from the a/c box right under the passenger dash. It drips out of that little plastic plug. This happens because of the water build up on the windshield cowl, and when you turn it goes into the plenum area and i...

Ok them are the dealer numbers but I am getting everything from my local lowes. I know I am getting grade 8 bolts, I just need to know before I do the install if the rears are the same size as the fronts?

Ok thanks for your help, can anyone else confirm this.

Yes the 4 bolts that clamp the front swaybar on. You are saying they are the same as the rear?

I am upgrading to hotchkis and wanted to replace the front sway bar bolts, I have the size for the rears, but what size do i need for the fronts?
Thanks

I cant find anywhere that carries a 15/16 MC discs all the way around W/O ABS This freaken sucks, I have paypal and need to pay that way. I called Napa they want like $150, murrays wants $100 with core. The only problem is the money is in my paypal :rofl: I think I may have found it, rockauto.com. W...