2GN.ORG

Still no luck, tried it on a breaker bar and they still wouldn't move, these dam things feel like they are welded in place.

srtjesse wrote:dam dude its led madness haha lol hey were did you get your leds man those are sick

autolumination.com

I went out and bought the bit but that thing is really in there! Used my air rachet at 120psi and it didn't even budge, for something thats supposed to be on there at 48lbs it fights like its on their at 150lbs. I currently have both bolts soaking in wd40, hopefully that will loosen them up.

I went to go replace them a couple weekends ago and ran into problems left in right. My little manual says to take the rear seat backs off, but they are held on by some weird style bolt.

Anyone know how to remove it or what bit I have to buy to remove it?

If you do the retrofit, wathc this guys videos they are very informative.
http://www.youtube.com/user/IznTrblInc

i forget what year my tach cluster came from but my dome works fine in my 2000.. are you sure your dim switch isnt turned all the way on so the dome is on constantly It is now because I don't have the bulb in, but I never thought of that when I had the problem. I'll check it out tomorrow, I really ...

They are $18.45 for a pack of 15 which isn't too bad. wow I know where to buy them now, thanks! I broke two when I was installing my speakers, ans that was just the drivers side.

http://www.clipsandfasteners.com/Chrysl ... a19804.htm

hmm, just wondering but since I put a cluster with a tach in my car since it didn't come with one, is that the reason why my dome light won't turn off? Because I have a cluster from a different year? I had to take the bulb out and be in the dark at night when I open my doors. It does work right when...

wow, 8.25 each.. dam.
Thanks

I need the part number for the little white fasteners that hold the inner plastic door peice on.

No those are the stock ones.

Buy a 03 and up with blown motor or tons of miles for under 4k then srt swap with the other 6k insurense wont go up ! and oyu still get to have the fun of working on the car=D I like the idea and I did think about that but I don't want a srt swapped neon. I can't believe how my feelings have change...

thanks, that answers a lot of my questions, but still didnt see if they will work in a stock housing. just says a better cutoff with a projector. They wouldn't work as well in halogen housings. I personally wouldn't install them in the halogen housings because by me the local police/ state troopers...

cbjones26 wrote:i say to a srt swap with the $$ if i had the money thats what id do! but thats just me.

That would be am option if I had a better neon to swap that motor into. I wouldn't buy a neon just to swap the motor out to me that makes no sense.

I am debating whether I should continue modding the current neon or if I should buy anouther one. If I start saving up right now, I would have roughly 3200 dollars by july for a 10,000 dollar loan These are the options I am debating: 1. Find a fully optioned 01 or 02 r/t for about 5k and put 5k into...

I have some more pics + video of what happens when your mfs relay breaks. Heres the video link: http://www.youtube.com/watch?v=TLC_uUTRxlg&feature=channel_page http://img185.imageshack.us/img185/3400/1001537uq8.jpg http://img368.imageshack.us/img368/5720/1001543xe1.jpg http://img384.imageshack.us/im...

Definately the 2002 bumper with the civic front lip!

I am pretty sure its from all the leds. It makes noise when I put the emergency lights on but the lights outside don't flash and when I use the left or right turn signal it just buzzes and doesn't allow anything to flash. The relay will only buzz if the lights are turned off. I'm hoping nitehawks re...

I have some pictures of my leds functioning, 3 white leds for hvac two 48led towers for turnsignals / running lights. I will get better pics when it gets darker but for now these will do. I am planning on putting a video up once I get the relay and mod it. http://img388.imageshack.us/img388/1665/100...

The led towers cam yesterday. I installed the 48 led switchback towers and after testing my turn signals I blew the mfs relay, good thing I have one on the way.... They sent me cool white 5led lights for the side markers which are supposed to be amber, so they have an email about that. I didn't get ...

Autolumination has one its called a braker control module and its 5.99 for the 921 style bulb:
http://autolumination.com/906.htm

Well I can fix the wiring harness issue by just purchasing one off ebay like this one: http://tinyurl.com/7kr74f That would solve that problem but then I have a bi xenon harness laying around. I thought that I would be ok with the bi harness as long as I don't use my high beams, but I guess I was wr...

Just recieved a email from vamp,

Cut the base from the top shorter. Possibly in 1/2 and it will then work. Sometimes this has to be done. As Dodge/Chrysler used other parts from their older Neons. But it does work.

-Adam

Great more work I have to do.......

So I bought a hid kit from vvme.com last friday and got everything yesterday. I noticed on saturday that I ordered the 9007 bi xenon bulbs instead of h1 bulbs, so I ordered the h1's form vvme on saturday. I was all ready to install everything today and noticed that these bulbs don't look to be an ex...

Try autolumination: http://autolumination.com/74.htm You want the ones that look like this: http://superlumination.com/images/auto_bulbs/nw_type_b_ss_b_wm.jpg The ones you want say this: 30% brighter than regular Neo - Wedge LED Instrument Panel Bulbs Type A, B & C They are the superstars and are 3....

DOSneons wrote:its just that i have the stock headlights and i cannot figure out were to mount them were they fit if any one can show me a pic of were u have it mounted

I can get you a pic tomorrow when I mount mine.

are you going to take a before and after shot of the stock headlights and the HID? I wanna see. Sure I'll go out and take one right now! Edit: I have two, the right side is aimed higher in the pic because that side is sitting on the gasket and is not bolted in. haha I really need to change the date...

jT wrote:if i remember correctly the hvac are the 10mm base .. but i might be wrong.. just measure the base

if you want any sockets for the gauge cluster ive got a whole bag of them i grabbed from the junk yard

Yes they are 10mm.

On my car, I can only see the outlines of the letters after I clay bar the trunk. As soon as I buff the trunk they magically disappear, so you should go out and buy yourself a claybay kit (mother's ftw!) clay bar that trunk and buff the hell out of it. Then you should be good.

I got as far as re aiming the headlights since they were aimed up just a little bit. My fingers we freezing and got numb after 30mins so I stoped I am going to get new connectors for my halo/led wires to make taking the headlights out easier. I don't see how the stock H1 bulbs come out of the projec...