2GN.ORG

Neons usually have a little steering wheel vibration at and above 70 mph. But if its excessive you may have a bent or out of balance wheel. I would also suggest having your tires Roadforce Balanced, especially if you had new tires put on and they didnt do it then.

There was a point a while ago that i signed on at work and made the mistake of leaving the screen up while i went and picked up a car, while i was gone a guy i work with posted a bunch of stuff talkin crap. I apologized to everyone that was posted on and i though the mods had deleted the stuff. I gu...

Say what?

thanks man i appreciate it

My unlock button no longer works on my remote.
Lock, trunk and alarm still work just no unlock.
I can get a new one cheap through my work but i was wondering if it is possible to program the remote myself.
I don't have an owners manual or access to a scan tool or anything

A power steering flush is recommended every 30k.
I brake flush is also recommended depending on the condition of the fluid

I've seen the thread on that hose and checked it thoroughly. Besides I don't see any reason that hose leaking would cause a high NVLD voltage. This isn't something I'm too eager about at the moment because a have front brake pads and rear wheel cylinders i' replacing on this check. I will keep looki...

I HAVE heard of them going out slowly. Me and another tech I work with cleared the codes on it the other day, and they stayed off all day, first thing the next morning they popped right back up after the evap system was tested. I believe the car is under an extended warranty still, but i'll have to ...

I had the P0441 for a while, started as intermittent and then stayed on. It wasn't until fairly recently that the other two codes popped up.

For any of the three codes it basically points to either a leaking vacuum line, failed gas cap, NVLD pump, or Evap purge valve.

I have an 03' SXT that is showing 3 codes. P0440- Evap System Failure P0441- Evap incorrect purge flow P0499- NVLD high voltage To me these would point to replacing the NVLD pump. But could it possibly also be a short somewhere? I've checked all vacuum hoses and electrical connections involved with ...

Click Here

I've seen a couple of these listings pop up before. How is hp on their springs?

*URL made smaller by Danteneon

Yea warranty work blows. Less flat rate hours AND at a reduced pay rate.

I have an 03 ATX SXT on SRT wheels. Stock struts and stock springs. I'm looking to lower the car and a am trying to decide what springs and struts to get. I've kinda narrowed it down to Tokico Blues and KYB struts. I've heard a lot of good things about the blues and have seen a couple people that ha...

Atlantic Blue SXT with black srt hood, stock wing painted black, and black srt wheels.

Just an idea I had


http://www.carmax.com/enUS/view-car-gal ... &zip=37204

To me it almost sounds like it's the belt slipping a little bit. It doesn't seem like motor mounts or exhaust flex. I don't really take it as a bad noise or anything, just another noise haha

Nah I just got the drop in filter.

Any idea on the squeek at shift?

Well not right after I've started it. And the K&N made it stop???

I have an 03 SXT ATX and when my car shifts at high rpm at WOT ( Most notably from 1st to 2nd) I get a squeeking noies. I can't tell it it's some kind of slight air leak or just the belt slipping a little. ALSO whenever my car was cold I'd get a loud clicking noise above 3000 rpms. But once the car ...

Multiple air filters is really only needed, if ever on much larger engines than ours, or in high boost engines. Having more than one on a neon wouldn't have any effect. What do you mean by sucking air in through the intercooler? If you mean ACROSS the intercooler then no, there is no benifit to that...

Well technically I live in Antioch.
But Nashville and Antioch kinda blend together lol

My car will be in the body shop gettin fixed up. I'll try and get some pics after.

Goin back to cali week after next ; )
And GA for thanksgiving.
Coast to coast in two weeks!

True on the breaks. Sometimes they just make a little noise. As long as it's not ridiculously loud it's usually okay.

As for the wheel noise, can you give me a better description on it maybe?

Jack up the corner that's making the noise just enough to get the wheel off the ground. Grab the tire on both sides and try to move it front to rear. Generally if it moves towards the rear its a tie rod end. And generally if it moves towards the front it's a lower ball joint. This is just a quick an...

That's the problem. I don't know what I want. haha.

Haha gotcha.
I haven't done anything visually to the car yet, and I had a semi decide I wasn't good enough to be in the lane next to him, so once it get's out of my roomate's dad's shop and I get my mopar kit on I'll snap some pics.

Lol Yea. I was like dude, wtf.

I haven't quite decided if I like the color matched over the black. I have a atlantic blue sxt and was thinking of doin black srt hood, stock spoiler black, and then mopar lip kit black. GAH SO MANY CHOICES!

I'm leaning a lot more toward the mopar kit, I may be able to get it for 10% over deal cost through my work.

I just saw that body kit and hadn't seen it on a neon before.
I thought it might be cheaply made, that's why I posted the originaly post guys ; )

How's it goin Everybody! My name's John, but ppl call me speed or Cali I'm Living here in Nashville but I was born and raised In Northern California. I drive and 03' SXT. Not much in mods right now, removed resonator, and put a muffler on it, but I finally have the resources to give my car the atten...

there lets see fiberglass and then urethane fiberglass well that what my front is not and everytime i hit something hard it either cracks or brakes off Do You drink before posting? lol I do Know a little bit about body kits, I was just looking for some feedback on this one. I've seen urethane kits ...

Sorry, that's what happens when you stay logged on a work computer I guess. Won't happen again guys