2GN.ORG

heres the link ;D
http://dodge-srt4.com/howto/foglight.html

notice the part where he states it doesnt work due to wiring.. BINGO! PT's must have a slightly different lighting wiring

.......

ok i just looked in my parts manuals, the pads re the same 95-05, the rotors are the same 95-05, but theres different parts here and there for the rest of it.. not saying that a complete 1g rear disc swap wouldnt work, but 1g rear disc isnt exactly 100% the same as 2g rear disc, but the rotors are t...

theres a howto on some srt owners site about modifing the stock switch, he had to brake the tip off to remove the roll pin which holds the switch on, then he grinded off some plastic ring that had stops to prevent it from engaging without the headlamps, then he jbwelded and rebuilt the tip, so its g...

not to go off topic, but how hard is it to swap out the rear rotors, i got some new OEM rotors to replace mine that have some gouges, just wondering whats all involved (havent even looked in the FSM yet)

is there a way to turn on the actuaator to see if it works, cause honestly i dont notice any difference in anything when i hit 5k rpms, and since the manifold was powdercoated before i bought the car im not positive that it works. and my dyno run barely show anything at 5k, just a minor dip/spike. i...

any recommendations on caliper paint? id like to paint em red while im at it.

E3EsXt02 just told me it is true, fogs w/ parking on the PT switch

EvilCreations wrote:Hey BRR.....is the part # for the PT Cruiser Multifunction switch the same? b/c they cruiser switch has the fog ability with the parks only.....and with the headlights......


Josh

you my friend might have just made alot of people happy, if this is true no more ghetto ass fogswitch mods

well i have my new hawk hps pads, now what all do i need besides tools to install them? skimming thru the FSM it said something about some mopar lubricant. sadly ive never changed brake pads in my life, not even on my 1st gen that i had for 5 years

heres one on ebay for $20, ive bought parts from the guy before, pretty good seller

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 50459&rd=1

just make sure he has one that is for fogs

also note (i already replied to his post over at neontuners) shops will not replace a working cat convertor, its illegal to do so. but some will do so off the books.

For 35$.. Thats some good stuff right there... I would keep the old ones for just incase... my upper mount is powdercoated black (to match the intake manifold) but the previous owner did his own filler mount (its kinda shitty looking) so if i cant get that crap out, ill just use the mounts im gettn...

im gettn prothane race, already installed into the mounts for $35 shipped (inserts+mounts) seems like SRTForums is the place for deals =p

well i just read the Factory Service manual and found the following information for us with rear disc. it looks like the rear ebrake shoes are not self adjusting (on vehicles with rear disc), thus manual adjustment is required after a period of time. the green boxed area is how to ADJUST the ebrake ...

boom314 wrote:three clicks i swear i hear like 5 or more clicks when i use my e-brake

mines more like all the way up (8clicks?)

ebrake cable tensioner in center console? where? what? ive never seen such a thing

i just noticed i almost have no pads in the rear (maybe why my ebrake barely works on a hill) ill be gettn Hawk HPS

when they refer to REAR/FRONT SET does that mean the rear set does both rears? or do i need 2 sets?

i got a jack that fits under my skirts, but im still weary of jacking my car up and seeing it only on 2 wheels (stupid eibachs) i still cant roll up on my rhino ramps yet (gotta get some wood) the normal floorjack point, is almost directly under where the front door hinge is at, if you look under th...

dont jack up the engine if youre trying to jack up the car, youre gonna break a mount doing that

wasnt it said somewhere that a STOCK magnum motor can make power up to 7200 but is limited by the rpm/fuel cutoffs in the pcm? i know at 6650 my power curve is just barely flattening out http://photos.biocandy.com/2002%20RT/DSCN0584.JPG 3rd run was with intake lid off + 5min cool down all runs were ...

6650 is where my rev limiter kicked in on the dyno.

er yeah i forgot to type PERFORMANCE hehe

its MPx because some people believe MP means MOPAR so when you look at something like this.. MP UDP MPx UDP so you dont get them confused =p DCX is the stock name (on NYSE) for DAIMLERCHRYSLER AG and MPx sells PAIRS of 03+ headlamps for $189. when I ORDERED a replacement driverside, I ORDERED ONE he...

MPx sells the DEPO brand 03+ headlamps at $89 a piece

anyone knoe what that little tan bar is, kinda looks like a rubber band or something. adjustment screw... hehe you could mod a stock set, all they did was blacked out the front portion that was chrome, i dont think they are smoked. just tear apart a stock 03 headlamp, take all the pieces out and fl...

oh no, im not switching back to 03+ style yet, i just saw these and was passing along the information.

found these on ebay, wondering what people think


http://cgi.ebay.com/ebaymotors/ws/eBayI ... 7986646473

witeout they are usually around $270-$280 with shipping on ebay by the same guy JDMWERKS13 or something similar to that. but i think $270 is the lowest ive seen

shh theres only 5