Search found 80 matches

by Drvr02RT
Tue Oct 17, 2006 11:59 pm
Forum: Motor Swap
Topic: Did SRT-4 Swap Car Wont Start
Replies: 25
Views: 5753

Hmm...I seem to have the same problem although I have the key, ignition, pcm, rke unit, and skim module from my swap car. Could mine have died due to me still having my R/T skim module on the column? Could it have not been sending the code to the SRT skim? I really would like an answer or idea becau...
by Drvr02RT
Sun Oct 15, 2006 12:13 am
Forum: Motor Swap
Topic: SRT Swap ??'s Need an answer ASAP Please!
Replies: 28
Views: 3566

Yeah sorry I switched carriers again. I posted it on neontuners though. Anyways... well the car will be done tomorrow I have to run to the hardware store and get some bolts but all that is left is axles, interior wiring and fuel tank. If your not doing anything tomorrow let me know, and extra set of...
by Drvr02RT
Sat Oct 14, 2006 3:29 am
Forum: Motor Swap
Topic: SRT Swap ??'s Need an answer ASAP Please!
Replies: 28
Views: 3566

Well all I have left to do is rewire the car put in the NVLD pump, raise the tank and drop the motor in. Hopefully it will start tomorrow night.

I do need a favor though. Does anyone have a picture of where to mount the coolant bottle?
by Drvr02RT
Fri Oct 13, 2006 2:45 pm
Forum: Motor Swap
Topic: SRT Swap ??'s Need an answer ASAP Please!
Replies: 28
Views: 3566

Yeah I removed the screws. Its out now. My motor is finally out and I'm going to be doing the fuel pump, fuel line, and emissions tonight. Possibly the a/c stuff too.
by Drvr02RT
Fri Oct 13, 2006 2:31 am
Forum: Motor Swap
Topic: SRT Swap ??'s Need an answer ASAP Please!
Replies: 28
Views: 3566

OK I'm in the middle of doing the swap..my motor is out and I'm putting the SRT Engine bay harness is. How the hell do I disconnect the engine bay harness inside the car? I've found the little box it plugs into up under the dash by the clutch pedal and i've pulled the red locking tab out but the dam...
by Drvr02RT
Mon Oct 02, 2006 3:36 am
Forum: Motor Swap
Topic: swap question
Replies: 66
Views: 10683

He got that item from the list that I created and with my swap parts, I'm getting it included so I thought that I would list it. But I've heard you can use your original pad.
by Drvr02RT
Mon Oct 02, 2006 1:17 am
Forum: Motor Swap
Topic: swap question
Replies: 66
Views: 10683

key pad = remote for keyless entry
by Drvr02RT
Fri Sep 29, 2006 2:05 pm
Forum: Motor Swap
Topic: SRT Swap ??'s Need an answer ASAP Please!
Replies: 28
Views: 3566

Will my A/C dryer and condensor work with the 03+ A/C lines? Do I nee d the battery tray?
by Drvr02RT
Thu Sep 28, 2006 7:49 pm
Forum: Cars For SALE
Topic: *****SOLD*****
Replies: 48
Views: 4579

Dawm dynoed 145 modded and 136 stock.
by Drvr02RT
Thu Sep 28, 2006 12:56 am
Forum: Motor Swap
Topic: SRT Swap ??'s Need an answer ASAP Please!
Replies: 28
Views: 3566

BTW, i will be using my stock brake setup. What is the ABS Module? The silver blcok where the brake lines come out of?
by Drvr02RT
Thu Sep 28, 2006 12:12 am
Forum: Motor Swap
Topic: SRT Swap ??'s Need an answer ASAP Please!
Replies: 28
Views: 3566

SRT Swap ??'s Need an answer ASAP Please!

Is it absolutely necessary to have to install the ABS parts when doing the SRT swap? If it is, what exactly do I need? Here is the parts list I have so far. Engine Transmission All Engine and Transmission Mounts Intercooler Piping Intercooler Complete Engine Wiring Harness Complete Engine Bay Wiring...
by Drvr02RT
Sun Sep 24, 2006 8:39 pm
Forum: Motor Swap
Topic: update on my 01 RT w/ SRT powered
Replies: 4
Views: 1217

Did you have to cut the front bumper at all? If so, do you have any pics of what to cut?
by Drvr02RT
Wed Sep 13, 2006 6:37 pm
Forum: General 2nd Gen Discussion
Topic: few questions
Replies: 6
Views: 571

caustic neon wrote:The PT valve train is only for the dohc motors.
While thats true, he is planning a 2.4L head swap. All 2.4L's are DOHC.
by Drvr02RT
Wed Sep 13, 2006 6:08 pm
Forum: General 2nd Gen Discussion
Topic: few questions
Replies: 6
Views: 571

You wont be able to use the SRT headgasker due to different oil and coolant drainback holes, just use the MOPAR headgasket. I would rebuild it with the complete PT Cruiser valvetrain, roughly $180 through discounted sites. If you want to use overbored pistons you must overbore your block. Also, if y...
by Drvr02RT
Wed Sep 13, 2006 4:46 pm
Forum: Suspension, Steering & Brakes
Topic: Strut Question
Replies: 10
Views: 1039

Tokico blues are actually warrantied and designed for dropped vehicles. I thinks they warranty up to 1.5-1.75in drop. So yes, you would be fine with them.
by Drvr02RT
Fri Jan 06, 2006 2:43 am
Forum: HT Chassis
Topic: How-To: Filled firm mounts for ~$5! NO JOKE (DIY)
Replies: 37
Views: 14848

Just some cheap-o glue from Walmart. :lol:
by Drvr02RT
Thu Jan 05, 2006 11:10 pm
Forum: Suspension, Steering & Brakes
Topic: rate your springs!
Replies: 34
Views: 4480

I have the Mopar 2nd Gen Lowering Springs (not to be confused w/ high-rates) and Tokico Blue's. It's a great ride, corners really nice and is not bouncy at all. I would post pics but my car is in the shop right now.
by Drvr02RT
Wed Jan 04, 2006 9:44 am
Forum: HT Chassis
Topic: How-To: Filled firm mounts for ~$5! NO JOKE (DIY)
Replies: 37
Views: 14848

I actually used the hotglue on my 1st gen and it only lasted about 6-8 weeks before it started to break apart into chunks. Made a real mess too.
by Drvr02RT
Wed Jan 04, 2006 2:06 am
Forum: Site Problems / Feedback / Suggestions
Topic: Creeeeeeeeeepin'...
Replies: 12
Views: 2398

I was going to mention something, but thought it was just my connection, but yes...the site is creeping along. I'm sure it will be fixed soon though.
by Drvr02RT
Fri Dec 30, 2005 9:59 pm
Forum: General 2nd Gen Discussion
Topic: Seats?
Replies: 4
Views: 446

The SRT seats that have airbags in them look just like our R/T seats with different material on the bolsters. Other than that, I'm not sure what to do, maybe someone else can chime in.
by Drvr02RT
Thu Dec 29, 2005 12:48 am
Forum: Engine
Topic: belt tensioner done...still whine?
Replies: 21
Views: 1726

Yes, we got it finished in under 2 hours. Actually, my buddys just kept throwing belts and eating them, after we removed the old bracket plate we looked at the tensioner wheel and the entire inside of it was gone. Its def. a DIY job.
by Drvr02RT
Wed Dec 28, 2005 2:05 am
Forum: Engine
Topic: belt tensioner done...still whine?
Replies: 21
Views: 1726

Fair Warning: that motor mount bracket plate is a PITA to remove. It took me and my buddy about 2hrs to replace his, I've heard its best to have to people while doing this, one taking the bolts out and another working the jack...lots of up and downs.
by Drvr02RT
Wed Sep 28, 2005 11:41 pm
Forum: Drivetrain
Topic: 1st gen rt trannie vs 02 acr tranny
Replies: 3
Views: 1179

I have heard that the 2nd gen tranny is stronger, but like i said, its just hear-say. Maybe someone else will chime in and elaborate more on it.
by Drvr02RT
Wed Sep 28, 2005 11:39 pm
Forum: PN Electrical
Topic: Part Number Request: 01 ACR and 02 (all) fogs
Replies: 11
Views: 1753

Diablo, is that $107 for both or $107 each?
by Drvr02RT
Sun Sep 11, 2005 7:33 pm
Forum: Drivetrain
Topic: 02 r/t tranny
Replies: 10
Views: 1720

I once posted over on detroitneonowners.org about the sound below 2k rpms and a member over there said that is is normal....he said that I was "lugging" the trans because the rpms were so low. Now I shift at 3.5k and I get no noise.
by Drvr02RT
Wed Sep 07, 2005 2:46 pm
Forum: Suspension, Steering & Brakes
Topic: Swaybar theory discussion
Replies: 27
Views: 2917

I would say they are a great idea...especially if you autox. The rear bar has two settings, street and race. When I bought mine I had the rear set on street and then when I switched my struts out I changed it to race. On the race setting the backend does like to get a little slide happy on wet pavem...
by Drvr02RT
Tue Sep 06, 2005 7:33 pm
Forum: Drivetrain
Topic: Bushing problem/gear problems??
Replies: 7
Views: 1654

Did you hear them "snap" on when you installed them? If not, I would double check the install.
by Drvr02RT
Tue Sep 06, 2005 7:25 pm
Forum: General 2nd Gen Discussion
Topic: Tokico Blue owners!
Replies: 19
Views: 1517

LOL...that was a good one
by Drvr02RT
Tue Sep 06, 2005 2:52 pm
Forum: General 2nd Gen Discussion
Topic: Tokico Blue owners!
Replies: 19
Views: 1517

Yes
by Drvr02RT
Fri Sep 02, 2005 1:20 am
Forum: General 2nd Gen Discussion
Topic: Front/Rear sway bars- Energy suspension kit
Replies: 15
Views: 1103

I like my hotchkis set....29mm front and 24mm adjustable rear..both hollow.

Go to advanced search