2GN.ORG

I had never heard anything bad about the Kirk before other than relatively small primaries, but I am doing a moderate all motor build so that shouldn't be an issue. The thing I like about TTi is you can get them coated pretty cheap $63 for ceramic (outside only) and $120 for ceramic outer and "therm...

Where are you guys finding the new TTi LTH? I know you can get them coated too for a reasonable price. Howell used to carry them but not anymore (I prefer not to deal with Howell anyway). I tried google but no luck finding the TTi LTH for the neons. Thanks Leg Break...that was back in Nov...I am sti...

Yeah, it will be awhile since I just dropped $$$ on a new MPx 60mm TB (the used ones are gone soooo fast) and a set of Rota Slipstreams. I was thinking about the Mag Kirk LTH and get that coated. The plan is to eventually go LTH> flex> high flow cat> possible resonator (leaning toward morso)> either...

http://www.modernperformance.com/product_info.php?cPath=148_199&products_id=1396&osCsid=19a3bb15ce658f6e5e7774867583a9bc This should work on a non mag sohc, right? I have a stock mag header now so I assume it would work, I would just need a SOHC gasket vs. the Mag gasket... I plan on doing a Mag he...

Just ordered mine Friday along with a set of Rota SLipstreams 15x7 in Flat Black The rims are on back order but hte TB should be here in a few days!

Where did you get the rims?

I just ordered a set of 15x7 slipstreams from Modern Performance and now you got me worried. I never considered hub size...I figured correct bolt pattern and offest and I am good to go. I am guessing that they will be okay though...

Yeah I plan on treating myself to a 60mm TB with some tax return money and maybe a set of Rota Slipstreams...then I would be a little less slow. At this rate my car will rust out before I am done with my "build"

opened a whole can of worms there...

ever get to the dyno?

gotchya! Thanks!

What about fuel? IIRC, the comp 400 is a little "hotter" than the Crane 14, and I have been told you have to pull fuel at idle with the 14 to get it to run correctly. I have a mag cam that has been sitting in the garage for over a year...I need help installing cause I am a noob/scared to screw up my...

Boogers are a MUST!

I think the K&N is great for what it is. I bought one and had it for a few weeks until I found a great deal on an AEM CAI...even for a DD with no other mods, I would get a K&N drop in.

I was wanting an odessy for my slow @$$ 2003 sxt for the weight savings and just to have something a little nicer under the hood, assuming the thing would last forever...but if they are just light and purdy, but don't do their job or wont last, then I will go with the autozone special. Is there an o...

the $150 battery doesn't have a warranty? Aren't most cheapo batteries guarenteed for a couple of years at least?

I have an 01 mag cam that has been sitting in my garage for a year and a half. I was waiting for a head to P&P and put it in at the same time. Now I got the head but haven't worked on it in months (a cheap rechargable dremel works great for P&P...too bad it only works 10 min at a time). If the stupi...

I hear ya. If you don't mind me asking...how much you got sunk into that bad boy so far?

pics? I am waiting for video and dyno...lol

I have vowed not to do buisness with Howell since I bought the Jet stage II chip and dynoed it and (not suprisingly) got nothing. I emailed Howell and called and let them know the product was junk and they blew me off. The only reason I bought the chip is cause Howell had something on the website th...

I have an 03 sxt with AEM CAI, Mag header and vibrant muffler. I am currently P&P a SOHC head that will be decked .04 and I will put a mag cam in...I assume NGC can handle that? Others have said they needed to tune fuel to get a Crane 14 to idle properly, so I figured I would ask... I wasn't concern...

I have the Kuhmo ECSTA SPT and like them quite a bit. The ride is nice, not a lot of road noise, the sidewall is a little soft and they don't make much noise as they reach the breaking point and when they do let go it can be kinda sudden, but just let up a little and they hook right back up.

screw the bumper...take the insurance money (if any) and nuy go fast parts!

on stock 7 spoke rims (which weigh about 17.25lbs each) straight grip is great, ride is smooth, road noise is minimal. They do tend to magnify torque steer a little bit (the wider track maybe). Haven't been to the track since I got them but they handle 3-3500 rpm clutch drops at lights with just a t...

might as well go turbo, you don;t have to crank the boost if you dont want to. Also if you go the Magnum swap route, you KNOW you wont be satisfied and will end up upgrading to turbo anyway. Save the time and money and do it right the first time.

hit the dyno and let us know. I would be suprised if it were over 3hp... and don't trust the "butt dyno"

just follow what I wrote and it should go pretty straight forward. IF some bolts give you trouble try some PB blaster or simlar product, some also idle the car a little to heat things up, but not too hot! 1-3hp gain...maybe. I did not bother dynoing just the header. I am doing a self P&P on a sohc h...

mine does this too. I live in a housing area with a 15mph speed limit so if I cruise thru in 2nd sometimes it will start that jerking and get more violent if I don;t let off or accelerate...I just shift into third and idle and that puts me at a nice smooth 15mph...

I plan on pulling my spoiler off soon. Need to find something other than bubblle gum and duct tape to fill the holes. There is a guy (streetbadges.com) who sells plugs for the neons that are painted to match, just not in my color. And he has some negative reviews lately so I am waiting to see how th...

Not sure about the SAFC. I was told that the Crane 14 needs some fuel management to run correctly. The comp 400 is comparable to the Crane 14? Eventually I want a SAFC, but don't need it right now. Want to get the head/cam stuff done and then a 60mm tb and then I want to get a mag intake (just like ...

I am in the same boat with ya'll (well maybe another boat next to ya'lla boat cause ya'lls boat is getting full). I have an 01 Mag cam and mag springs waiting to go into my 03 sxt. I am picking up a complete head today (minus lifters) and I will be getting it decked .04 and then doing a light P&P an...