2GN.ORG

Posted: **Mon Jul 31, 2006 4:04 pm**

i have an 02 neon base (atx) and i want to know where the transmission computer is? and where can i get a new/used one?

Posted: **Mon Jul 31, 2006 6:03 pm**

I thought the transmission computer was part of the PCM on the Neons. BlackRose, verify that for me?

What type of problems are your running into?

Posted: **Mon Jul 31, 2006 7:25 pm**

jerks into drive and reverse and when it should shift to second it jumps into neutral until i stop and put it in park then back to drive

Posted: **Tue Aug 01, 2006 12:30 am**

getting code p0700 so i know there's something wrong with the computer anybody??

Posted: **Tue Aug 01, 2006 12:32 am**

i had that problem too..do you shift your car?

Posted: **Tue Aug 01, 2006 12:57 am**

not really maybe a couple times, what was your problem?

Posted: **Tue Aug 01, 2006 1:06 am**

well my problem was cuz of water, but if you shift to much sometimes it fucked up the transmission..i kno that much..or maybe you need a transmission flush..cuz our concorde did that, and it sucked backin up..take it to a garage or maybe to someone that will look @ it for no problem cuz my parents garage looked at it wit no problem and thats how i kno wat was wrong with the concorde, but with the neon i took my intake out to look @ it..

Posted: **Tue Aug 01, 2006 6:39 am**

My question is do you have a 3speed or 4speed?
Early 02's could have had either or

Also early 4speeds had a seperate trani controller, its going to be about 8inches wide,6inches high and have one big connector attached to it....
The other things you have to look into are:
How's the fluid and filter?
Is the solenoid pack leaking?
There various options it could be, the best bet is to have someone with a GOOD scan tool to take a look at whats going on for you...

Posted: **Tue Aug 01, 2006 6:35 pm**

its a 4 speed and i changed the fluid and filter, the fluid smelled burnt but there was no metal shavings in the pan or anything, and where is the solenoid?? and where would the seperate controller be??

Posted: **Tue Aug 01, 2006 8:54 pm**

i really need help on this , I WANT MY NEON BACK lol

Posted: **Wed Aug 02, 2006 2:51 pm**

nobody knows anything about this?? this site is my only hope right now

Posted: **Wed Aug 02, 2006 7:11 pm**

sounds like rebuild time to me

Posted: **Wed Aug 02, 2006 8:02 pm**

or, rather, mtx swap time!

Posted: **Wed Aug 02, 2006 9:57 pm**

nah. its cooler to be the quick atx once its all said and done

Posted: **Thu Aug 03, 2006 2:06 am**

wouldn't it be cheaper to just get a tranny from a junkyard??

Posted: **Thu Aug 03, 2006 2:17 am**

danielc24 wrote:its a 4 speed and i changed the fluid and filter, the fluid smelled burnt but there was no metal shavings in the pan or anything, and where is the solenoid?? and where would the seperate controller be??

About 3 months ago, I was getting the stumbling in first gear and all the signs of "rebuild time". When we drained the fluid, it smelled really burnt, but there was actually little to no metal shavings around the magnet collector thing. Well, when the dealer finally went to rebuild my transmission, they found that nothing could be used from my transmsission, at all, not even the valve body. I ended up getting a Modern Performance rebuild kit and having a junkyard tranny rebuilt.
Hopefully your problem doesnt end up being as bad as mine, but just be ready for a potential pain in the ass.

2GN.ORG

transmission ?

transmission ?