2GN.ORG

i have a turbo timer and it says

the red = power +12v
yellow = IG(key on) +12V
blue = ACC or IG2 +12v
black = Ground -
Brown = handbrake switch

im confused on the IG and ACC/IG2

can you guys tell me which of these would go where on a neon...? i know pink and black is power, ground on the car solid bolt, not 100% sure about the ebrake switch. well really just the IG and ACC im confused about. can anyone help?

What year/trim is the neon?

00 es

The ACC is going to be hooked up to a location that is only powered when the key is on
something like the power outlet in the cabin or something to that effect

as far as the IG (which means ignition) this is probably the wire that will send the signal to shut the engine off - So that probably need to be taped into an actual ignition wire (i dont have my manual with me at work) - hopefully someone else knows off the top of their head where this would be

i see and what about the ebrake to?

lvlistchif wrote:i see and what about the ebrake to?

pull up the center console and take a look see at the ebrake assembly. there will be a switch there that tells the car when its engaged....usually to set off the dahs light....tap into that it tells the turbo timer that the brake is engaged to prevent it from rolling because you obviously need to put the car in nutral. (sp)

the ebrake wire is black and white (i think)......look up under the passenger side cup holder its there