searched but cant find

Have a question that your not sure what category it fits into or isn't really a specific question about a specific part? Ask it here...
Post Reply
lvlistchif
2GN Member
Posts: 659
Joined: Tue May 23, 2006 5:19 pm

searched but cant find

Post by lvlistchif » Mon Sep 18, 2006 8:53 pm

i see how it says 2.4 wills fit in first 2gn neons and everything but with the exhaust manifold? will the srt turbo manifold fit directly up to a 98 breeze 2.4?

User avatar
eVilcreations
Former Jr. Admin
Posts: 2411
Joined: Tue Jul 06, 2004 6:52 pm
Location: the flatlands, KS
Contact:

Post by eVilcreations » Mon Sep 18, 2006 9:16 pm

Not quite sure EXACTLY what you are asking, but as far as the Breeze 2.4L the SRT turbofold should fit. However, please keep in mind that the internals on that motor are not the same as the SRT 2.4L or the PT GT 2.4L, and therefore cannot probably handle as much boost.

Josh
Image

lvlistchif
2GN Member
Posts: 659
Joined: Tue May 23, 2006 5:19 pm

Post by lvlistchif » Mon Sep 18, 2006 9:23 pm

yea i know that much i was probably going to put srt internals in it. im gettin a 2.4 breeze motor on saturday and ive been researching the last few days because i just swapped a sohc in my car (00 es) it was the same stock motor cause i blew up my other one but now i want to rebuild this 2.4 and drop it in after the winter but im wondering what everything i will need. seems like i cant find every little detail i will need. i have a donor car with everything still in it but i cant seem to find mount information fuel lines harness and ecu problems people always say they are swapping but all i see is in first gens mostly and dosent give me enough info on 2nd.

User avatar
MoxHair
2GN Member
Posts: 3801
Joined: Mon Feb 27, 2006 5:41 pm
Location: Atwater, CA; Orlando, FL
Contact:

Post by MoxHair » Mon Sep 18, 2006 9:58 pm

doubt SRT internals will fit into that block.
2017 Subaru WRX STI
Road Racing > Autocross > Spirited Driving > Sitting in Traffic > Mowing Lawns > Drag Racing

lvlistchif
2GN Member
Posts: 659
Joined: Tue May 23, 2006 5:19 pm

Post by lvlistchif » Mon Sep 18, 2006 10:12 pm

oooooo well i figured i would need the 03-05 passanger side engine mount. how about the alternator bracket? will i need to replace that to? as for fuel ill use a safc i guess on a turbo setup can i use srt injectors though? and i figured i would use a 97-99 dohc computer + harness and splice w/e dosent fit. what other problems may i run into so far thats all i can see may be wrong. for fuel lines... should i replace them all the way back to the tank or will my 2.0 fuel lines be good?

User avatar
eVilcreations
Former Jr. Admin
Posts: 2411
Joined: Tue Jul 06, 2004 6:52 pm
Location: the flatlands, KS
Contact:

Post by eVilcreations » Mon Sep 18, 2006 10:17 pm

You'll need the Tranny mount for sure. I'm not THAT familiar with the Breeze motor....so I can't really say for sure about the other stuff.


Josh
Image

lvlistchif
2GN Member
Posts: 659
Joined: Tue May 23, 2006 5:19 pm

Post by lvlistchif » Mon Sep 18, 2006 10:37 pm

tranny mount off the breeze or off a 03-05? and what about the alternator?

Post Reply

Return to “General 2nd Gen Discussion”