2GN.ORG

....I will once again start working on my car. You might say, "It's about time!". Well, yes it is. There are many little things left to finish on the car. One of the major things is up grading the fuel canister to a Spoolboy canister, along with upgrading all the fuel lines going from and to the canister. Another, changing out the short intake manifold studs with harden steel longer ones. I need to rewire all of my Autometer gauges for the 3 pod a pillar I have. I will be removing the "RICE" tach and maybe the volt meter gauge. I will also be wiring up the Greddy Boost controller and start fabing up a new location for my head unit. Soon, I will be upgrading from PT Calipers to SRT-4 Wilwood Calipers. There are other little things I need to do. Once thats all done, I will be starting her up for the first time in over 2 YEARS! So, if there is anyone close to Southern Maryland that wants to give me a hand let me know. I will also let everyone know when I plan on starting the car up so you can plan to be there. Stay tuned!!!!!!!!!

ill drive down from jersey just for this event

it seems that glasswars is the only one that cares!!!!!!!!!!

I would love to be there but I am 1200 miles away. Maybe a good vacation spot to check out...

I'd love to see this as well, but, I'm like 3500miles away......take lotsa pics, and some video too!

You care...you really care!!!

I plan on taking a ton of pics and video!

I'd come down, but I'll be getting my new project home, finally, and start working on it.

I'm there spiritually man.

Nick Drake wrote:I'm there spiritually man.

Be sure to take alot of pics and videos though, cause sometimes I miss stuff when I'm in the spirit world.....lot's of stuff goin on ya know?

I wish I could be there but I'm around 500 miles away Take pictures and video!!!!

or you could bring the car to us

Let me know when you plan to start it up.

I'd help too but I'm booked thru till Nov.

UPDATE

ok, ive got my autometer gauges re-wired, the greddy boost is wired up, the aem wide band is wired and ive removed the rice tach and a/f gauge. i ordered a Lorenzo fuel rail to replace the stock one. ive also ordered NGK spark plugs, and earls oil cooler kit. i should be droping the gas tank on wednesday. i'll let y'all know how it goes!

UPDATE 2

Today i droped the gas tank and installed the new Spoolboy moded fuel canister, re-adjusted the rear sway bar, removed the intake manifold and removed the old fuel lines. I'll be going with -6an from the front to rear. The Earls oil cooler kit came, but the cooler is way to small, so I'm sending it back to get a bigger one. I also got a Golden Eagle Vacuum manifold to run all my boost lines off of. Just need to find a place to tap into, or maybe run a new line off the intake manifold, I dont know yet. Well the good news is Im getting there. Just a few more weeks.

sounds good. your getting me excited!

i'd maybe buy your pt brake set up if the price was right and if i decide to keep my car haha....i'd come down for the start up

hah - wish i could be there -

lots of pics ! hah

J-Villa wrote:i'd maybe buy your pt brake set up if the price was right and if i decide to keep my car haha....i'd come down for the start up

it would just be the calipers, new ss brake lines, new hawk pads and new rotors. all you would need is the knuckles. $200 sounds like a fair price.

im ordering 30ft of -6an fuel line on friday........about $300. after that the car should be starting up in the next few weeks. wish me luck!

I can't wait to see this at next year's meet.

Where are my pics, Joe?

I thought there was going to be ongoing pix?!?! I would love to see this beast at the 2GN meet next year!

sure, ill take pics....but there realy isnt much to see right now. i'll take some tomorrow.

today i cut off my exhaust, put the kaminari rear bumper on, cleaned up the interior parts i got from the junk yard, and intalled my SRT-4 shift boot! so, tomorrow, ill have pics and stuff.

UPDATE 3

So, today I installed all the fuel lines, the fuel rails and injectors, re-installed the intake manifold, radiator, and hooked up most of the sencors. I have set the start up date for 11-12-06. Thats in two weeks. So, if you have nothing to do and want to be there when I start her up, PM me and I'll give you directions!

Pics and Vid are coming!

If you weren't so far away I'd come or if I had a job and you did it on a weekend I'd try to come

well the 12th is a sunday......

True but that doesn't leave much time to drive up, see it, hang out... drive back lol. It's not exactly a day trip though I have done trips like that in a day and back haha But again... no job so money is still tight.

get that thing started already!!!!!!!!1 id come but you are all the way in the top most part of the U.S. and i am almost in the very bottom of the U.S.

My order from Modern Performance came today. So I'll be intalling a Greddy Catch Can and Airbag delete on Sunday! And I promise to take some pics!

Awesome! I love getting large packages... Its like christmas everytime..... Can't wait to see the mods yo

sunday is only a few days away!!!!! i have just about everything ready to go for the start up. theres just a few more little things to take care of on sunday.......BUT SHE WILL START! i promise i will take lots of pics and vid! i cant wait and im sure ya'll cant either!