Page 1 of 1
Inj. Question
Posted: Tue Jan 23, 2007 11:46 pm
by blazesxt
Would fuel injectors from a 2004 SRT-4 work on a 2g? Would there be any modification needed to make them work?? I can get em ffor pretty cheap.
Posted: Wed Jan 24, 2007 12:36 am
by dblsg
unless you got some major moddage to the engine, your just gonna flood the f*** outta of it.
Posted: Wed Jan 24, 2007 5:40 am
by BlackRoseRacing
^^^
Agreed, the OE srt injectors flow 500-550cc/min of fuel, unless you have sometype of fuel management system, the srt injectors are way to big for the 2.0.
But on a side note, yes they will bolt right in....
Posted: Wed Jan 24, 2007 9:49 am
by blazesxt
I am getting a SOHC Turbo project started. I already have the turbo/manifold, oil and coolant lines, and BOV.
Posted: Thu Jan 25, 2007 5:11 am
by BlackRoseRacing
You can use the SRT injectors, but I tried them with an AF/X R pcm on stock fuel pressures and the AF/X pulled 50% of the fuel from the maps and it still ran to rich at idle to 3500rpm on a N/A motor.
Posted: Thu Jan 25, 2007 7:27 am
by white2000neon
were they 03 or 04 injectors?
Posted: Thu Jan 25, 2007 9:07 am
by jonnymopar
white2000neon wrote:were they 03 or 04 injectors?
Make sure to check that. The 03 injectors flow less than the 04-05 injectors. How much, I'm not sure.
Posted: Thu Jan 25, 2007 1:19 pm
by blazesxt
04
Posted: Thu Jan 25, 2007 2:21 pm
by jonnymopar
Cool. Those are the Stage 1 injectors. 572cc/min I think.