quick question

boxcarfan · Post by **boxcarfan** » Sun Jul 01, 2007 8:15 pm

if im wiring something from my battery like a 12 ga. wiring (for an amp) how would i get it inside the cabin without going in from the door...is there a hole or something i can use to run it into the cabin of the car?...its 02 sxt mtx btw. thanks guys!!!!

SteelBlue · Post by **SteelBlue** » Sun Jul 01, 2007 8:51 pm

Yeah there is - there are a few spots on the firewall that you can route the amp wire through. I don't have my car nearby to tell you exactly where but just follow some wires and see if you can put it through there. If you can't, its possible to just drill a new hole and then put a rubber gasket in there (to prevent rubbing the wire). I think there's a spot almost directly behind the battery and such. If i remember correctly my amp wire just runs straight back from the battery...

I'd suggest checking in the audio section; I'm sure someone has posted pics of their installs and that should help you out some. Good luck!

danielc24 · Post by **danielc24** » Sun Jul 01, 2007 9:31 pm

i wouldn't recommend using 12 gauge for an amp, but if that's what your using you should be able to find a hole to fit it through... I had to drill my own since my power wire was 0 gauge

boxcarfan · Post by **boxcarfan** » Sun Jul 01, 2007 9:59 pm

its just a small 240 amp. a 12 ga. wire will do fine to me.