Wanting to buy tranny mount insert...

danman132x · Post by **danman132x** » Thu Sep 27, 2007 6:26 pm

http://neongoodies.com/Goodies/PL2K_Tra ... sert.shtml

I really want to buy this insert for my tranny mount to help reduce wheelhop at the track. Does anyone know if this will fit an 03, like he claims it does?

One more thing...it seems like it would be a pain in the a** to install. Is it possible without dropping the entire engine?

EDIT_____
I did some searching and seen that Magnums will need modifications

If I do get one, I might just have to hack it up a lil

SlvrACR · Post by **SlvrACR** » Thu Sep 27, 2007 6:45 pm

Ya those dont fit the magnum ones because of an extra peice. I just filled mine with urethane.

danman132x · Post by **danman132x** » Thu Sep 27, 2007 6:46 pm

Would it be possible to cut the extra piece off?
~or~
fill the mount with urethane while it's still in place on the motor?

SlvrACR · Post by **SlvrACR** » Thu Sep 27, 2007 6:51 pm

What i did was just buy a mount used and filled it. I have zero wheel hop right now. You will see a big improvement.

Post by **jonnymopar** » Thu Sep 27, 2007 7:42 pm

SlvrACR wrote:...buy a mount used and filled it.

Best way to do things right there. Used mounts are short money and doing it that way, the only time your car is tied up is the time it takes you to switch the mounts.

SGT BRAD · Post by **SGT BRAD** » Thu Sep 27, 2007 8:12 pm

honestly i had to deal with this a few weeks ago. i would take the mount off or better yet buy my extra one. send it to bwoody and he'll fab a solid polyurethane mount for you for 140.00 shipped. the filled one i had failed. i have inserts now only b/c i had the dealer order a replacement for me when i couldn't source a used one. it was only after having the dealer order one that bwoody offered the custom fabbed mount or that's what i'd have done.
brad

03blackrt · Post by **03blackrt** » Thu Sep 27, 2007 8:38 pm

I thought the differance was not between Magnums and non-Magnums but rather 2000-2002's and 2003-2005's?

MoxHair · Post by **MoxHair** » Thu Sep 27, 2007 9:41 pm

Vitor's mount will fit a magnum without modification.. At least they did on my 03 R/T.

Post by **jonnymopar** » Thu Sep 27, 2007 10:25 pm

I still don't know why people go through Vitor when you can get them direct from PolyBushings for less. I believe they're the ones that make it anyway.

MoxHair · Post by **MoxHair** » Thu Sep 27, 2007 10:38 pm

link to polybushings?

kc2005ptgt · Post by **kc2005ptgt** » Fri Sep 28, 2007 12:09 am

do any of the home depot, lowes, ace hardware, someone like that sell urethane? I can not get it from online because I have to use cash :grumble:

/threadjack

03blackrt · Post by **03blackrt** » Fri Sep 28, 2007 12:13 am

http://www.energysuspensionparts.com/pr ... rod=DIYMMI

I got my urethane here and paid via paypal, $33 to do all the mounts.

kc2005ptgt · Post by **kc2005ptgt** » Fri Sep 28, 2007 12:17 am

grrr... I want to find it locally. So I can pay cash... its too complicated of a story right now to explain, either I do cash or check, or money order

danman132x · Post by **danman132x** » Fri Sep 28, 2007 1:33 am

I found the poly bushings site and the mount inserts
http://polybushings.com/pages/1002.html
I might just cough up the $33 and see if they fit. If not, I'll make them fit

MoxHair · Post by **MoxHair** » Fri Sep 28, 2007 6:38 pm

They'll fit.. had no issues with my 03 R/T

polybushings doesn't take credit cards or paypal.. they just lost me as a customer.

gilly02le · Post by **gilly02le** » Sat Sep 29, 2007 8:52 am

jonnymopar wrote:I still don't know why people go through Vitor when you can get them direct from PolyBushings for less. I believe they're the ones that make it anyway.

Thats true, Polybushings.com provides neongoodies with thier mounts.

http://polybushings.com/pages/moparmounts.html

My friend has an entire set of poly mounts for his 93 Shadow es. Only downside is they don't accept paypal... He got all his stuff quickly and it was all really well made. I'll be ordering a tranny mount in the next few days.. ill take some pics while i work incase i decide to make a how-to..

oklamopar · Post by **oklamopar** » Sat Sep 29, 2007 8:58 am

I have one of victors in the 02 R/T . But i don't remember if there was any modifications