Page 1 of 1
Code 1495
Posted: Tue Jul 12, 2005 2:49 am
by Baal
Well i installed my new 2001 AF/X MT RACE ECU (i didnt have any codes with my stock ecu) and now theres a P 1495 code wich isnt very common, all i could find is this:
1495 Leak Detection Pump (LDP) pressure switch problem - the solenoid circuit.
But it doesnt have the P, im not sure if that makes a difference.
Posted: Tue Jul 12, 2005 2:22 pm
by Louie
if you bought it from howell. call them, ask for gary, and explain the situation. he should be able to help you out, and if it's a defective pcm he can send you a new one.
Posted: Wed Jul 13, 2005 4:26 am
by Baal
I just want to know what does the code mean so i can check if the ecu is right.
Posted: Wed Jul 13, 2005 5:25 pm
by Baal
come on!
Posted: Wed Jul 13, 2005 5:50 pm
by eVilcreations
Louie wrote:if you bought it from howell. call them, ask for gary, and explain the situation. he should be able to help you out, and if it's a defective pcm he can send you a new one.
I would recommend you call Gary......he'll help you out....and he'll for sure know what the code is coming from I'm sure.....
Josh
Posted: Wed Jul 13, 2005 11:14 pm
by Louie
EvilCreations wrote:Louie wrote:if you bought it from howell. call them, ask for gary, and explain the situation. he should be able to help you out, and if it's a defective pcm he can send you a new one.
I would recommend you call Gary......he'll help you out....and he'll for sure know what the code is coming from I'm sure.....
Josh
exactly. .i know you want to know what the code means, that's why i said call gary, he'd most likely know. and if it is a computer problem it could be settled right there
Posted: Thu Jul 14, 2005 6:32 pm
by Baal
well i simply cant believe theres no one in this forum who doesnt know what "Leak Detection Pump (LDP) pressure switch problem - the solenoid circuit." means.
Posted: Thu Jul 14, 2005 6:36 pm
by Louie
well ... with that attitude it means that the pressure switch on the leak detection pump is broken. so it can't detect leaks.
anyway the leak detection pump is the evap canister behind your rear pass. wheel.
just pick up the phone and call gary.
Posted: Thu Jul 14, 2005 7:54 pm
by Baal
Louie wrote:well ... with that attitude it means that the pressure switch on the leak detection pump is broken. so it can't detect leaks.
anyway the leak detection pump is the evap canister behind your rear pass. wheel.
just pick up the phone and call gary.
Calling other countries is out of question, ill wait for him to reply in this thread
Posted: Thu Jul 14, 2005 10:26 pm
by Diablo0
PM him and direct him to this thread incase he doesn't see this.
or IM him on AIM at TheWitchDOHC
Posted: Thu Jul 14, 2005 11:03 pm
by Louie
Baal wrote:Louie wrote:well ... with that attitude it means that the pressure switch on the leak detection pump is broken. so it can't detect leaks.
anyway the leak detection pump is the evap canister behind your rear pass. wheel.
just pick up the phone and call gary.
Calling other countries is out of question, ill wait for him to reply in this thread
lol ..no wonder you were so hesitant my bad
yea shoot him a pm, he's pretty quick to answer.
Posted: Fri Jul 15, 2005 5:53 am
by BlackRoseRacing
Its got to be a problem with the PCM. Normally on the 00-05 neons.....
P codes are for powertrain
U codes are for ABS or airbag modules
no-letter code....thats not normal...like everyone stated above contact gary howell:
http://forum.2gn.org/privmsg.php?mode=post&u=120
Posted: Fri Jul 15, 2005 9:25 pm
by Baal
i pmed him yesterday, lets see what he has to say.
Posted: Tue Jul 19, 2005 8:51 pm
by Baal
no reply from gary
Posted: Wed Jul 20, 2005 7:06 am
by BlackRoseRacing
you use the link I posted above?
I honestly have not really seen any posts from him in a while...I think the last post he did was over in the Neon Meets topic....July 16th...
Posted: Thu Jul 21, 2005 5:32 am
by Baal
BlackRoseRacing wrote:you use the link I posted above?
I honestly have not really seen any posts from him in a while...I think the last post he did was over in the Neon Meets topic....July 16th...
probably an angry customer finally got him...
