Page 1 of 1
alarm?
Posted: Sat Jul 16, 2005 3:30 pm
by Anonymous User
does anyone on here know how to adjust the stock OEM alarm. b/c mine is SUPER sensitive. could i be able to do it myself or would i have to go to a dodge dealer? i want to know b/c if i park it out on the street some where it always goes off, every 10-30min when the alarm is activated. thanks if anyone could help
Posted: Sat Jul 16, 2005 4:01 pm
by TNK
my factory alarm only goes off when the door is opened from the inside when locked... are you sure yours is a factory alarm?
Posted: Sat Jul 16, 2005 4:40 pm
by Anonymous User
theneonkid wrote:my factory alarm only goes off when the door is opened from the inside when locked... are you sure yours is a factory alarm?
yea i am sure. its an OEM alarm. it has 4 buttoms on it. unlock, alarm, trunk release, and a red panic button. and less that a year ago i got the alarm adjusted to be less sensitive, but its back to sensitive again.
Posted: Sat Jul 16, 2005 4:41 pm
by DJ CptnCrnch
i have the same thing on my car, but my alarm never goes off...i just figured i never got one...i have the same four buttons
Posted: Sat Jul 16, 2005 6:01 pm
by boom314
i think some cars came with the alarm enabled and some didnt. but im not sure, maybe someone with more experience can tell us for sure
Posted: Sun Jul 17, 2005 8:34 pm
by Anonymous User
no one knows?

Posted: Sun Jul 17, 2005 8:51 pm
by mospaxreton
Anonymous User wrote:no one knows?

Im not sure if my 2000 es Has the same as yours, but give this a try look under your steering wheel where your pedals are but more to the left... Thats where my little sensor box was. It has a little nob that you can turn, (sensitivity) look there if you haven't yet. Hope that helps..
Posted: Mon Jul 18, 2005 7:05 pm
by BlackRoseRacing
It is called chryslers VTS system. The only thing different between your system and mine is you have te shock sensros where as I don't.
When you find the sensor, as stated earlier...look for the sensitivity knob, or a screw with an alan head....back it off....
If you do not find such a device, you are going to have to hit up the dealer for a De-tunefor your VTS.....
Posted: Mon Jul 18, 2005 10:07 pm
by Anonymous User
BlackRoseRacing wrote:It is called chryslers VTS system. The only thing different between your system and mine is you have te shock sensros where as I don't.
When you find the sensor, as stated earlier...look for the sensitivity knob, or a screw with an alan head....back it off....
If you do not find such a device, you are going to have to hit up the dealer for a De-tunefor your VTS.....
so you guys are saying i should find a box on the left side located where? the only box i found was a black box underneath the carpet that had all the wiring going to it.
Posted: Tue Jul 19, 2005 2:23 am
by WiTeOuT
Pick up a phone, call Your local Dodge dealership. Ask for the "Service" department. Explain that you need to turn down your stock alarm's sensitivity's meter. And instead of all of us just poking at where to look, they should be able to tell you EXACTLY where to find it. Good luck!
Posted: Tue Jul 19, 2005 6:29 am
by BlackRoseRacing
PM me your last 8 digits of your vin so I can see if you actually have VTS