my rims!!!
Posted: Fri Jul 22, 2005 1:45 pm
my rims scrape when theres people in the back and when i take a left turn i took them 2 be checked and they arent bad what can it be
Page 1 of 1
Posted: Fri Jul 22, 2005 2:29 pm
you need to shave the wheel well to give more clearance. is it the back ones fo rthe fronts. if its the back then shave the top area of the inner wheel well.
Posted: Fri Jul 22, 2005 3:02 pm
do you mean rolling the edges in?half_twisted wrote:you need to shave the wheel well to give more clearance. is it the back ones fo rthe fronts. if its the back then shave the top area of the inner wheel well.
Posted: Fri Jul 22, 2005 3:16 pm
no i mean taking a grinder and grinde away about a 1/4 away. yo have about 3/4 to 1" of a lip in the inner wheel well..dblsg wrote:do you mean rolling the edges in?half_twisted wrote:you need to shave the wheel well to give more clearance. is it the back ones fo rthe fronts. if its the back then shave the top area of the inner wheel well.
Posted: Fri Jul 22, 2005 3:23 pm
Or, depending on your offset and all that good stuff you may be able to correct it with some spacers.
Posted: Fri Jul 22, 2005 3:38 pm
like it scrapes with tihs steel pipe the tire dont scrape its the rim the in side of it
Posted: Fri Jul 22, 2005 3:52 pm
What are your size rims?
Posted: Fri Jul 22, 2005 6:39 pm
You have fat friends? 
(Just implying that you should let us know what kinda' ride height you got going on, along with rims size, etc.)
(Just implying that you should let us know what kinda' ride height you got going on, along with rims size, etc.)
Posted: Sat Jul 23, 2005 7:52 am
well i got 18s and my friends are like 175lbs both or 200lbs let say
Posted: Sat Jul 23, 2005 10:45 am
they need to ride the bus
Posted: Tue Jul 26, 2005 4:57 pm
oh i had the same problem, after my suspension settled.. its coming from the passenger side rear wheel right?.... well u have to put a spacer on that wheel... its the suspension geometry that makes that bar.. sorry dont know the name move towards the rim when the suspension oscilates, escpecially when people are in the back.. i first used some cheap spacer from pep boys, then when i took it for some brake work this local tire place put some longer studs in there for me for like $30, so i had more than enough stud to hold on to when puttin on the lugs...
Posted: Tue Jul 26, 2005 10:20 pm
What kind of offset are you guys using that you scrape???
Posted: Wed Jul 27, 2005 12:00 am
dont kno but i kno how to fix it.. wheel spacer on right rear wheel.. problem fixed
Posted: Tue Aug 02, 2005 11:17 am
You rims must be more than 7" wide. Look into things a little more before u buy rims.
BTW what are the metal bars that run along the inside in the rear where the wheels are?? Just curious...
BTW what are the metal bars that run along the inside in the rear where the wheels are?? Just curious...