Changing the rear
Posted: Mon Aug 29, 2005 5:39 pm
has anyone put an SRT4 rear bumper on an 03-04 sxt..and the exhaust system? pics??
That's what it would look like. It will all just bolt on, aside from paint.2GN.ORG
The best source for the Second Generation Neon - Period.
https://forum.2gn.org/
Changing the rear
Page 1 of 1
Posted: Mon Aug 29, 2005 5:57 pm
Why do you need pics? Just look at a rear shot of an SRT-4. That's what it would look like. It will all just bolt on, aside from paint.
That's what it would look like. It will all just bolt on, aside from paint.Posted: Mon Aug 29, 2005 6:07 pm
i have an sxt with sxt exhaust...i dont think srt cover will fit exhaust...or i will have to buy both
Posted: Mon Aug 29, 2005 6:16 pm
the srt exhaust pipes are wider than the r/t pipes. Im not sure by how much though.
Posted: Mon Aug 29, 2005 6:22 pm
inches...
My SRT exhaust had to be narrowed almost 2"'s per side....
My SRT exhaust had to be narrowed almost 2"'s per side....
Posted: Mon Aug 29, 2005 6:25 pm
well i guess i will have to measure it ...man i really want a srt rear cover.....but i dont want the srt exhaust,...because i have hear its too loud on a sxt with man trans
Posted: Mon Aug 29, 2005 6:37 pm
its only loud if you just use the catback...
install a resonator or glasspack on the midpipe and you will be fine. The SRT resonators are garbage, I picked up a NAPA resonator for a GM product for around $30 and it was quieter than the dual SRT resonators...
install a resonator or glasspack on the midpipe and you will be fine. The SRT resonators are garbage, I picked up a NAPA resonator for a GM product for around $30 and it was quieter than the dual SRT resonators...
Posted: Mon Aug 29, 2005 7:05 pm
loud pipes save lives 
i love my catback srt
i love my catback srtPosted: Mon Aug 29, 2005 7:48 pm
the rear bumper with R/T exhaust holes are different. The R/T muffler would need to be extended approximately 1.5 - 2 inches on each side of the pipes.
Optionally you can do the rolled bumper mod
Optionally you can do the rolled bumper mod
Posted: Mon Aug 29, 2005 9:25 pm
How do you do the rolled bumper mod, i've heard about SRT guys doing it but never anyone exlpaining how its done.
Posted: Mon Aug 29, 2005 9:53 pm
http://www.srtforums.com/forums/showthread.php?t=130970
the pics are broken but i have the thread saved on my work pc. If you want them i can upload them. All you need are some good zip ties.
the pics are broken but i have the thread saved on my work pc. If you want them i can upload them. All you need are some good zip ties.
Posted: Tue Aug 30, 2005 6:38 am
FREE mods are always good.....
Im also considering doing it to my R/T. It might even help with aerodynamics
Im also considering doing it to my R/T. It might even help with aerodynamics
Posted: Tue Aug 30, 2005 10:13 am
so..its only loud if i use the rear section of the exhaust only right?..well what if i use the stock mid section from "down pipe" back that connects to the rear section of the windy pipes that fo out the back of the car...still loud?...or am i going to have to buy resonator....are they boly on?....and can some one upload those rolled bumper mod pics....the other link is missing about 4 pics