Bushing Size.
Posted: Tue Jul 07, 2009 6:32 pm
What size are the stock shifter bushings for an 01' R/T?
Dealer lists 3 sizes for some reason.
Dealer lists 3 sizes for some reason.
2GN.ORG
The best source for the Second Generation Neon - Period.
https://forum.2gn.org/
Bushing Size.
Page 1 of 1
Posted: Tue Jul 07, 2009 6:36 pm
Buy Booger Bushings....
Posted: Tue Jul 07, 2009 7:16 pm
Yeah I don't wanna wait for them. This is like final I don't care about it stage of my cars life.
Posted: Tue Jul 07, 2009 7:24 pm
i got mine in like 3 days for my SXT, from the manufacturer. that was a couple years ago tho.
iirc, my sxt used 3 small bushings, and a large one. the srt was 4 of the small ones. i can't remember 100% tho
iirc, my sxt used 3 small bushings, and a large one. the srt was 4 of the small ones. i can't remember 100% tho
Posted: Tue Jul 07, 2009 7:41 pm
^You're right
Re: Bushing Size.
Posted: Tue Jul 07, 2009 8:14 pm
They should come in a set. All the SRT bushings are the same, while the non-SRT's have one oddball large one.flhmfd wrote:What size are the stock shifter bushings for an 01' R/T?
Dealer lists 3 sizes for some reason.
Posted: Tue Jul 07, 2009 8:20 pm
bone-yard-racing wrote:^You're right
see? excessive alcohol/drug use only makes you THINK you can't remember shit.
Posted: Tue Jul 07, 2009 8:34 pm
I know this. The dealer has different diameters tho. Anyone have a part number?
Posted: Tue Jul 07, 2009 9:07 pm
measure the ID of your shift cable linkage at the shifter, get 3 of those. then go under the hood, and measure the ID of the other sized one, get 1 of those. win.
Posted: Tue Jul 07, 2009 9:11 pm
You mean to tell me that they can't use your VIN to find which ones you need? Go to another dealerflhmfd wrote:I know this. The dealer has different diameters tho. Anyone have a part number?
Posted: Wed Jul 08, 2009 10:10 am
My vin turned up those results.
Posted: Wed Jul 08, 2009 12:14 pm
I thought the bushings were only serviced (oem) via the shifter cables.
The dealer may be giving you the ones that go into the trans case for the shift selector shafts.
The dealer may be giving you the ones that go into the trans case for the shift selector shafts.
Posted: Wed Jul 08, 2009 7:52 pm
The shift cable-shifter assy are serviced separately. All four bushings can be removed and replaced without servicing the linkage.
Posted: Thu Jul 09, 2009 11:28 am
I have about 500 stock bushings, all in very good condition. PM me your mailing info, and for a $5 PayPal, I'll USPS Priority ship them to you.
Only problem is that I don't have any of the large bushings - you would need to swap in SRT4 cables to use all 4 small ones.
As for there being 3 different sizes, they're wrong. There are only 2 sizes - the small ones and the large one, the design of which have been in use since '89.
Only problem is that I don't have any of the large bushings - you would need to swap in SRT4 cables to use all 4 small ones.
As for there being 3 different sizes, they're wrong. There are only 2 sizes - the small ones and the large one, the design of which have been in use since '89.
Posted: Fri Jul 10, 2009 1:01 am
Is this the cause of my hardshifting? My shifter feels sloppy and notchy.
Posted: Fri Jul 10, 2009 3:09 pm
Worn or damaged bushings can cause difficult or inaccurate shifting. This, in turn, can damage your transmission.