Valve cover

Have a question that your not sure what category it fits into or isn't really a specific question about a specific part? Ask it here...
Post Reply
dominiaa
2GN Member
Posts: 126
Joined: Tue Jul 12, 2005 10:54 am
Location: Buffalo

Valve cover

Post by dominiaa » Wed Dec 14, 2005 4:17 pm

My R/T has the 2.0 L valve cover does anybody know where i could pick up the magnum one? anybody know why it would have this one?

User avatar
Diablo0
2GN.org Owner/Admin
Posts: 12574
Joined: Thu Apr 15, 2004 11:20 pm
Location: Greenville, SC
Contact:

Post by Diablo0 » Wed Dec 14, 2005 4:33 pm

Are you sure you're talking about the valve cover and not the injector cover? The valve cover is big metal piece that sits ontop of the engine... all of them say 2.0L just the magnum is made of aluminium or whatever... if you have an R/T you have the mangum cover.

Now if you're talking about injector cover, thats a little plastic cover that fits overtop of your fuel rail and covers your injectors. Early models came with the cover but late model years didn't. You can pick one of the High-Output covers at the dealer for under $20 or so... plus about $5 for the bolts with the studs ontop.
-Jason
Black '02 Neon R/T | White '02 Neon R/T - SRT-4 Engine Swap
Image
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein

User avatar
half_twisted
2GN Member
Posts: 729
Joined: Thu Jul 21, 2005 11:31 pm
Location: Anaheim Ca.
Contact:

Post by half_twisted » Wed Dec 14, 2005 4:49 pm

Diablo0 wrote:Are you sure you're talking about the valve cover and not the injector cover? The valve cover is big metal piece that sits ontop of the engine... all of them say 2.0L just the magnum is made of aluminium or whatever... if you have an R/T you have the mangum cover.

Now if you're talking about injector cover, thats a little plastic cover that fits overtop of your fuel rail and covers your injectors. Early models came with the cover but late model years didn't. You can pick one of the High-Output covers at the dealer for under $20 or so... plus about $5 for the bolts with the studs ontop.
arnt all v/c made of carbonegraphite same as the intake manys
now unless you have the high performance models i wouldnt know what the v/c are made of. maybe its just the 00-02 models that have carbone graphite v/c. all 1st gens have metal v/cs
Image

dominiaa
2GN Member
Posts: 126
Joined: Tue Jul 12, 2005 10:54 am
Location: Buffalo

Post by dominiaa » Wed Dec 14, 2005 4:51 pm

I know what the valve cover is, I thought in some of the older posts that i read, people were refering to the valve cover when they said injector cover. I thought they were just using the wrong name. Didn't realize they were actually two seperate things. Thanks for the help

User avatar
Diablo0
2GN.org Owner/Admin
Posts: 12574
Joined: Thu Apr 15, 2004 11:20 pm
Location: Greenville, SC
Contact:

Post by Diablo0 » Wed Dec 14, 2005 4:54 pm

half_twisted wrote:
Diablo0 wrote:Are you sure you're talking about the valve cover and not the injector cover? The valve cover is big metal piece that sits ontop of the engine... all of them say 2.0L just the magnum is made of aluminium or whatever... if you have an R/T you have the mangum cover.

Now if you're talking about injector cover, thats a little plastic cover that fits overtop of your fuel rail and covers your injectors. Early models came with the cover but late model years didn't. You can pick one of the High-Output covers at the dealer for under $20 or so... plus about $5 for the bolts with the studs ontop.
arnt all v/c made of carbonegraphite same as the intake manys
now unless you have the high performance models i wouldnt know what the v/c are made of. maybe its just the 00-02 models that have carbone graphite v/c. all 1st gens have metal v/cs
Non-Mags are plastic... Magnums are metal...

http://forum.2gn.org/viewtopic.php?t=46 ... wder+cover
-Jason
Black '02 Neon R/T | White '02 Neon R/T - SRT-4 Engine Swap
Image
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein

dominiaa
2GN Member
Posts: 126
Joined: Tue Jul 12, 2005 10:54 am
Location: Buffalo

Post by dominiaa » Wed Dec 14, 2005 5:04 pm

on another note, does anybody know where I could find a polished aluminum valve cover?

User avatar
Diablo0
2GN.org Owner/Admin
Posts: 12574
Joined: Thu Apr 15, 2004 11:20 pm
Location: Greenville, SC
Contact:

Post by Diablo0 » Wed Dec 14, 2005 5:12 pm

No one really makes on... you'll have to buy another VC and polish it yourself, send it off somewhere, or take it some place locally to have it done.
-Jason
Black '02 Neon R/T | White '02 Neon R/T - SRT-4 Engine Swap
Image
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein

dominiaa
2GN Member
Posts: 126
Joined: Tue Jul 12, 2005 10:54 am
Location: Buffalo

Post by dominiaa » Wed Dec 14, 2005 5:15 pm

thought I could get out of it the easy way and just by one

User avatar
half_twisted
2GN Member
Posts: 729
Joined: Thu Jul 21, 2005 11:31 pm
Location: Anaheim Ca.
Contact:

Post by half_twisted » Wed Dec 14, 2005 7:39 pm

dominiaa wrote:thought I could get out of it the easy way and just by one
you could if you find a used one being sold. on the other hand like mentioned before u can find a mag v/c and take it to a powder coating shop. you can have it polished or any color you like.

i think im getting one cuz i cracked mine while replacing the pvc valve. blasted carbonegraphite...

Image

can you guys see the urethane filled motor mount, painted that baby red also.
Image

Post Reply

Return to “General 2nd Gen Discussion”