hood adjustment

Have a question that your not sure what category it fits into or isn't really a specific question about a specific part? Ask it here...
Post Reply
mickeytopher
2GN Member
Posts: 71
Joined: Fri Apr 12, 2013 10:23 am

hood adjustment

Post by mickeytopher » Mon Mar 31, 2014 10:53 am

So the hood on the wife's '02 needs to be tweaked ever so slightly. I notice that on the front right corner of it you can see where it's been hitting, but doesn't seem to be touching, any one have any suggestions

A@ron
2GN Member
Posts: 31
Joined: Wed Jan 01, 2014 1:12 pm
Location: Fort Wayne, IN

Post by A@ron » Mon Mar 31, 2014 11:16 am

Under each of the hinges there will be 2 bolts connecting it to the hood. Loosen the bottom bolt on one side and the top on the other and then reposition the hood. You don't want to loosen all of them or the hood will shift front to back as well. You also don't want to loosen them too much, you want the hood to only move a little and only when purposely moved. Then once aligned tighten the bolts.

Post Reply

Return to “General 2nd Gen Discussion”