Blinkers don't work, but hazard warning lights work.

Have a question that your not sure what category it fits into or isn't really a specific question about a specific part? Ask it here...
Post Reply
Michael7
n00b
Posts: 16
Joined: Sat Sep 06, 2014 10:37 am
Location: UK

Blinkers don't work, but hazard warning lights work.

Post by Michael7 » Sat Oct 04, 2014 5:11 pm

Just bought Neon R/T 2003. Blinkers don't work, but hazard warning lights work, i.e. bulbs and wiring are OK. Multi-function switch is OK, checked it on another NEON LX. Found that 10A fuse No.1 in a fuse box was burnt, so I replaced it. It is responsible for blinkers and power mirrors. Power mirrors don't work as well by the way. Don't see anything else on the wiring diagram in blinkers circuit. Everything should be OK now, but it's not. I'm going to check the fuse box itself in the morning.
Any suggestions, what might cause blinkers and power mirrors not to work?
2002 Neon LX (ATX) & 2003 Neon R/T

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9491
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Sat Oct 04, 2014 6:30 pm

obviously something on the circuit is screwed up if your fuse is blowing. sounds like you have a short somewhere
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

Michael7
n00b
Posts: 16
Joined: Sat Sep 06, 2014 10:37 am
Location: UK

Post by Michael7 » Mon Oct 06, 2014 2:40 pm

found a short. Someone pour tea or cola on a door handle with mirror control board or maybe decided to wash it with lot's of water. Blinkers work now, but mirror control unit has to be replaced. Plastic has melted.
2002 Neon LX (ATX) & 2003 Neon R/T

Post Reply

Return to “General 2nd Gen Discussion”