Page 1 of 1
Melted Connector in steering column
Posted: Tue Apr 18, 2006 8:48 am
by Knoxville_R/T
My friend in his 01 rt has a melted connector for the multi switch. What is the fix for this. The White connector is what is melted. Can anyone give me a part number for this(only can fidn the harness) or a quick fix. Every neon we have looked at in the junkyard has been melted also.
Posted: Tue Apr 18, 2006 10:16 am
by teamliviD
http://forum.2gn.org/viewtopic.php?t=7784&highlight=
this just happened to me! the fix will cost about $120!
Posted: Tue Apr 18, 2006 6:33 pm
by jonnymopar
It's $120 if you need the harness AND a new switch. It's only half that if your switch is good and all you need is the harness.
Posted: Tue Apr 18, 2006 6:50 pm
by WiTeOuT
Hey Brian who's the friend? He in TN?
Anyhow this happened to me and I did'nt need the multifunction switch. Also I found one at a Junk yard and spliced it into the existing wireing..... total $50.
Posted: Tue Apr 18, 2006 9:12 pm
by Knoxville_R/T
Matt Plane
Yes he is in TN. He works with me also.
Posted: Wed Apr 19, 2006 6:28 am
by BlackRoseRacing
5183442AA - $58.10msrp
The listing only comes up under 00-01 neons. If the dealership tries to look it up for anyother year there going to tell you its unavailable. I found out the hard way on my car, cuting and splicing a used connector is a PIA.